{"id":7086700789940,"title":"Boston Gear G170 Spur Gear, 14.5 Pressure Angle, Brass, Inch, 32 Pitch, 0.187\" Bore, 0.75\" OD, 0.062\" Face Width, 22 Teeth 32 Inches 0.062 Inches 0.75 Inches 0.187 Inches","handle":"boston-gear-g170-spur-gear-14-5-pressure-angle-brass-inch-32-pitch-0-187-bore-0-75-od-0-062-face-width-22-teeth-32-inches-0-062-inches-0-75-inches-0-187-inches","description":"\u003ch3\u003eBoston Gear G170 Spur Gear, 14.5 Pressure Angle, Brass, Inch, 32 Pitch, 0.187\" Bore, 0.75\" OD, 0.062\" Face Width, 22 Teeth\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Boston Gear brass spur gear with 14.5-degree pressure angle (PA) and a\ndiametral pitch (DP) of 32 transmits torque between parallel shafts to provide\nrotational power to another part of a motorized system. It has a 14.5-degree\npressure angle for a higher contact ratio between gears than larger pressure\nangles, resulting in quieter operation, and a 32-diametral pitch for\napplications for applications where controlling changes in speed and direction\nof rotation with precision is more important than transferring torque. This\nspur gear, which can mesh only with spur gears that have the same pressure\nangle and diametral pitch, is made of brass for corrosion resistance,\nductility at high temperatures, and low magnetic permeability. This Boston\nGear spur gear is suitable for use in a variety of commercial and industrial\napplications, such as construction equipment, aeronautics, conveyors, and\nmanufacturing equipment, among others.Spur gears, the most common gear type,\nhave a circular or cylindrical shape with teeth bordering the outer perimeter\nand are used for transmitting rotational torque and motion between parallel\nrotating shafts. A spur gear's pressure angle (PA), diametral pitch (also\ncalled DP or pitch), and its material are important factors to consider when\npurchasing. Gears come in several types for use in different power\ntransmission configurations and for different applications, including bevel\nand miter gears (for rotating shafts perpendicular to each other), change\ngears (to increase or decrease torque and speed), helical gears (for high\nrates of rotational speed), internal gears (where one gear is nested inside\nthe other), rack and pinion gears (for turning rotational motion into linear\nmotion), and worm gears (for perpendicular shafts in tight spaces and quiet\noperation). Gears are suitable for use in the agriculture, automotive,\nconstruction, mining, and packaging industries, and can be found in a variety\nof machines, including bicycles, automobiles, and elevators, among\nothers.Boston Gear manufactures a variety of gear drives, variable speed\ndrives, clutches, and the components that comprise these systems including\nsprockets and bearings. Their manufacturing designs, production, and\ninspection meet International Organization for Standardization (ISO) standards\nfor quality assurance. The company, founded in 1877, is headquartered in\nCharlotte, NC.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTransmits torque between parallel shafts to provide rotational power to another part of a motorized system\u003c\/li\u003e\n \u003cli\u003ePressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles\u003c\/li\u003e\n \u003cli\u003eDiametral pitch of 32 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T04:13:53+11:00","created_at":"2022-03-19T04:13:53+11:00","vendor":"Boston Gear","type":"Spur Gears","tags":["auspowers_batchone"],"price":10100,"price_min":10100,"price_max":10100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41335370154164,"title":"0.187 Inches \/ 0.062 Inches \/ 0.75 Inches","option1":"0.187 Inches","option2":"0.062 Inches","option3":"0.75 Inches","sku":"B004N631BW","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Boston Gear G170 Spur Gear, 14.5 Pressure Angle, Brass, Inch, 32 Pitch, 0.187\" Bore, 0.75\" OD, 0.062\" Face Width, 22 Teeth 32 Inches 0.062 Inches 0.75 Inches 0.187 Inches - 0.187 Inches \/ 0.062 Inches \/ 0.75 Inches","public_title":"0.187 Inches \/ 0.062 Inches \/ 0.75 Inches","options":["0.187 Inches","0.062 Inches","0.75 Inches"],"price":10100,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"0781711092828","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B004N631BW.jpg?v=1648580645","\/\/auspowers.com\/cdn\/shop\/products\/71Cvpon6EtL.jpg?v=1647623633","\/\/auspowers.com\/cdn\/shop\/products\/71Bs8TlKkLL.jpg?v=1647623633"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B004N631BW.jpg?v=1648580645","options":["Bore Diameter String","Face Width","Item Diameter String"],"media":[{"alt":"[Australia - AusPower] - Boston Gear G170 Spur Gear, 14.5 Pressure Angle, Brass, Inch, 32 Pitch, 0.187\" Bore, 0.75\" OD, 0.062\" Face Width, 22 Teeth 32 Inches 0.062 Inches 0.75 Inches 0.187 Inches ","id":25351655653556,"position":1,"preview_image":{"aspect_ratio":0.866,"height":1645,"width":1425,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B004N631BW.jpg?v=1648580645"},"aspect_ratio":0.866,"height":1645,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B004N631BW.jpg?v=1648580645","width":1425},{"alt":"[Australia - AusPower] - Boston Gear G170 Spur Gear, 14.5 Pressure Angle, Brass, Inch, 32 Pitch, 0.187\" Bore, 0.75\" OD, 0.062\" Face Width, 22 Teeth 32 Inches 0.062 Inches 0.75 Inches 0.187 Inches ","id":25206671016116,"position":2,"preview_image":{"aspect_ratio":0.219,"height":1869,"width":410,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71Cvpon6EtL.jpg?v=1647623633"},"aspect_ratio":0.219,"height":1869,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71Cvpon6EtL.jpg?v=1647623633","width":410},{"alt":"[Australia - AusPower] - Boston Gear G170 Spur Gear, 14.5 Pressure Angle, Brass, Inch, 32 Pitch, 0.187\" Bore, 0.75\" OD, 0.062\" Face Width, 22 Teeth 32 Inches 0.062 Inches 0.75 Inches 0.187 Inches ","id":25206671048884,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1141,"width":1141,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71Bs8TlKkLL.jpg?v=1647623633"},"aspect_ratio":1.0,"height":1141,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71Bs8TlKkLL.jpg?v=1647623633","width":1141}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eBoston Gear G170 Spur Gear, 14.5 Pressure Angle, Brass, Inch, 32 Pitch, 0.187\" Bore, 0.75\" OD, 0.062\" Face Width, 22 Teeth\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Boston Gear brass spur gear with 14.5-degree pressure angle (PA) and a\ndiametral pitch (DP) of 32 transmits torque between parallel shafts to provide\nrotational power to another part of a motorized system. It has a 14.5-degree\npressure angle for a higher contact ratio between gears than larger pressure\nangles, resulting in quieter operation, and a 32-diametral pitch for\napplications for applications where controlling changes in speed and direction\nof rotation with precision is more important than transferring torque. This\nspur gear, which can mesh only with spur gears that have the same pressure\nangle and diametral pitch, is made of brass for corrosion resistance,\nductility at high temperatures, and low magnetic permeability. This Boston\nGear spur gear is suitable for use in a variety of commercial and industrial\napplications, such as construction equipment, aeronautics, conveyors, and\nmanufacturing equipment, among others.Spur gears, the most common gear type,\nhave a circular or cylindrical shape with teeth bordering the outer perimeter\nand are used for transmitting rotational torque and motion between parallel\nrotating shafts. A spur gear's pressure angle (PA), diametral pitch (also\ncalled DP or pitch), and its material are important factors to consider when\npurchasing. Gears come in several types for use in different power\ntransmission configurations and for different applications, including bevel\nand miter gears (for rotating shafts perpendicular to each other), change\ngears (to increase or decrease torque and speed), helical gears (for high\nrates of rotational speed), internal gears (where one gear is nested inside\nthe other), rack and pinion gears (for turning rotational motion into linear\nmotion), and worm gears (for perpendicular shafts in tight spaces and quiet\noperation). Gears are suitable for use in the agriculture, automotive,\nconstruction, mining, and packaging industries, and can be found in a variety\nof machines, including bicycles, automobiles, and elevators, among\nothers.Boston Gear manufactures a variety of gear drives, variable speed\ndrives, clutches, and the components that comprise these systems including\nsprockets and bearings. Their manufacturing designs, production, and\ninspection meet International Organization for Standardization (ISO) standards\nfor quality assurance. The company, founded in 1877, is headquartered in\nCharlotte, NC.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTransmits torque between parallel shafts to provide rotational power to another part of a motorized system\u003c\/li\u003e\n \u003cli\u003ePressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles\u003c\/li\u003e\n \u003cli\u003eDiametral pitch of 32 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque\u003c\/li\u003e\n \u003cli\u003eBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7086692958388,"title":"Metal Mod,CJ0618 Hi‑Lo Metal Gear Set M2.25 Motor Gears Replacement Durable Sliding Double Gear,for Chemical,Food Processing,Woodworking Machinery","handle":"metal-mod-cj0618-hi-lo-metal-gear-set-m2-25-motor-gears-replacement-durable-sliding-double-gear-for-chemical-food-processing-woodworking-machinery","description":"\u003ch3\u003eMetal Mod,CJ0618 Hi‑Lo Metal Gear Set M2.25 Motor Gears Replacement Durable Sliding Double Gear,for Chemical,Food Processing,Woodworking Machinery\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eFeature:1. Use high‑quality No. 45 steel material, high‑frequency quenching is\nstrong and durable.2. Please add lubricating oil to reduce the friction\nbetween the metal gears, and the sound will be reduced during operation.3.\nWide range of applications, can be used in chemical, food processing,\nwoodworking machinery, etc.4. Small size, easy to carry and store, convenient\nto use and with good performance.5. With great workmanship, this gear can\nperfect replacement for the old one. Specification:Item Type: Hi-Lo Metal Gear\nSetFixed Double Gear: Product Part Number: S\/N: CJ0618-024Product Material:\n45 steelProduct Specifications: Modulus M2.25;Height: Approx. 45mm \/\n1.8inDiameter: Approx. 30mm \/ 1.2inNumber of Teeth: T29xT21Sliding Double\nGear: Product Part Number: S\/N: CJ0618-014Product Material: 45 steelProduct\nSpecifications: Modulus M2.25;Height: Approx. 25mm \/ 1inDiameter: Approx. 12mm\n\/ 0.5inNumber of Teeth: T20xT12Size: Approx. 4.6cm \/ 1.8in5cm \/ 2in6.8cm \/\n2.7in2.5cm \/ 1in3cm \/ 1.2in4.9cm \/ 1.9inPackage List:2 x Gear\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eWork SmoothlyGood machining made less rough and less noise than other pinions that make them roll smoothly.Please add lubricating oil to reduce the friction between the metal gears, and the sound will be reduced during operation.\u003c\/li\u003e\n \u003cli\u003eGood Gear Hi-Lo metal gear set uses highquality No. 45 steel material, highfrequency quenching is strong and durable.Small size, easy to carry and store, convenient to use and with good performance.\u003c\/li\u003e\n \u003cli\u003eMultiple ApplicationGear with great workmanship, this gear can perfect replacement for the old one.Wide range of applications, can be used in chemical, food processing, woodworking machinery, etc.\u003c\/li\u003e\n \u003cli\u003eFixed Double GearProduct Part Number: S\/N: CJ0618-024; Product Specifications: Modulus M2.25; Height: Approx. 45mm \/ 1.8in; Diameter: Approx. 30mm \/ 1.2in;Number of Teeth: T29xT21\u003c\/li\u003e\n \u003cli\u003eSliding Double GearProduct Part Number: S\/N: CJ0618-014; Product Specifications: Modulus M2.25;Height: Approx. 25mm \/ 1in; Diameter: Approx. 12mm \/ 0.5in; Number of Teeth: T20xT12\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T04:07:44+11:00","created_at":"2022-03-19T04:07:44+11:00","vendor":"KUIDAMOS","type":"Internal Gears","tags":["auspowers_batchone"],"price":22600,"price_min":22600,"price_max":22600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41335365697716,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B08RHTVBGT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Metal Mod,CJ0618 Hi‑Lo Metal Gear Set M2.25 Motor Gears Replacement Durable Sliding Double Gear,for Chemical,Food Processing,Woodworking Machinery","public_title":null,"options":["Default Title"],"price":22600,"weight":568,"compare_at_price":null,"inventory_management":null,"barcode":"9588126303362","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B08RHTVBGT.jpg?v=1648580454","\/\/auspowers.com\/cdn\/shop\/products\/81FjTGa7nNL.jpg?v=1647623264","\/\/auspowers.com\/cdn\/shop\/products\/71n1xilzyvL.jpg?v=1647623264","\/\/auspowers.com\/cdn\/shop\/products\/81iKko-clnL.jpg?v=1647623264","\/\/auspowers.com\/cdn\/shop\/products\/81FEVmLvP_L.jpg?v=1647623264","\/\/auspowers.com\/cdn\/shop\/products\/61sG3Iir2PL.jpg?v=1647623264","\/\/auspowers.com\/cdn\/shop\/products\/61OK_n5-BGL.jpg?v=1647623264"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B08RHTVBGT.jpg?v=1648580454","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Metal Mod,CJ0618 Hi‑Lo Metal Gear Set M2.25 Motor Gears Replacement Durable Sliding Double Gear,for Chemical,Food Processing,Woodworking Machinery ","id":25351641890996,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B08RHTVBGT.jpg?v=1648580454"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B08RHTVBGT.jpg?v=1648580454","width":1601},{"alt":"[Australia - AusPower] - Metal Mod,CJ0618 Hi‑Lo Metal Gear Set M2.25 Motor Gears Replacement Durable Sliding Double Gear,for Chemical,Food Processing,Woodworking Machinery ","id":25206584410292,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81FjTGa7nNL.jpg?v=1647623264"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81FjTGa7nNL.jpg?v=1647623264","width":1601},{"alt":"[Australia - AusPower] - Metal Mod,CJ0618 Hi‑Lo Metal Gear Set M2.25 Motor Gears Replacement Durable Sliding Double Gear,for Chemical,Food Processing,Woodworking Machinery ","id":25206584443060,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71n1xilzyvL.jpg?v=1647623264"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71n1xilzyvL.jpg?v=1647623264","width":1601},{"alt":"[Australia - AusPower] - Metal Mod,CJ0618 Hi‑Lo Metal Gear Set M2.25 Motor Gears Replacement Durable Sliding Double Gear,for Chemical,Food Processing,Woodworking Machinery ","id":25206584475828,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81iKko-clnL.jpg?v=1647623264"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81iKko-clnL.jpg?v=1647623264","width":1601},{"alt":"[Australia - AusPower] - Metal Mod,CJ0618 Hi‑Lo Metal Gear Set M2.25 Motor Gears Replacement Durable Sliding Double Gear,for Chemical,Food Processing,Woodworking Machinery ","id":25206584508596,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81FEVmLvP_L.jpg?v=1647623264"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81FEVmLvP_L.jpg?v=1647623264","width":1601},{"alt":"[Australia - AusPower] - Metal Mod,CJ0618 Hi‑Lo Metal Gear Set M2.25 Motor Gears Replacement Durable Sliding Double Gear,for Chemical,Food Processing,Woodworking Machinery ","id":25206584541364,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61sG3Iir2PL.jpg?v=1647623264"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61sG3Iir2PL.jpg?v=1647623264","width":1601},{"alt":"[Australia - AusPower] - Metal Mod,CJ0618 Hi‑Lo Metal Gear Set M2.25 Motor Gears Replacement Durable Sliding Double Gear,for Chemical,Food Processing,Woodworking Machinery ","id":25206584639668,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1601,"width":1601,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61OK_n5-BGL.jpg?v=1647623264"},"aspect_ratio":1.0,"height":1601,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61OK_n5-BGL.jpg?v=1647623264","width":1601}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eMetal Mod,CJ0618 Hi‑Lo Metal Gear Set M2.25 Motor Gears Replacement Durable Sliding Double Gear,for Chemical,Food Processing,Woodworking Machinery\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eFeature:1. Use high‑quality No. 45 steel material, high‑frequency quenching is\nstrong and durable.2. Please add lubricating oil to reduce the friction\nbetween the metal gears, and the sound will be reduced during operation.3.\nWide range of applications, can be used in chemical, food processing,\nwoodworking machinery, etc.4. Small size, easy to carry and store, convenient\nto use and with good performance.5. With great workmanship, this gear can\nperfect replacement for the old one. Specification:Item Type: Hi-Lo Metal Gear\nSetFixed Double Gear: Product Part Number: S\/N: CJ0618-024Product Material:\n45 steelProduct Specifications: Modulus M2.25;Height: Approx. 45mm \/\n1.8inDiameter: Approx. 30mm \/ 1.2inNumber of Teeth: T29xT21Sliding Double\nGear: Product Part Number: S\/N: CJ0618-014Product Material: 45 steelProduct\nSpecifications: Modulus M2.25;Height: Approx. 25mm \/ 1inDiameter: Approx. 12mm\n\/ 0.5inNumber of Teeth: T20xT12Size: Approx. 4.6cm \/ 1.8in5cm \/ 2in6.8cm \/\n2.7in2.5cm \/ 1in3cm \/ 1.2in4.9cm \/ 1.9inPackage List:2 x Gear\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eWork SmoothlyGood machining made less rough and less noise than other pinions that make them roll smoothly.Please add lubricating oil to reduce the friction between the metal gears, and the sound will be reduced during operation.\u003c\/li\u003e\n \u003cli\u003eGood Gear Hi-Lo metal gear set uses highquality No. 45 steel material, highfrequency quenching is strong and durable.Small size, easy to carry and store, convenient to use and with good performance.\u003c\/li\u003e\n \u003cli\u003eMultiple ApplicationGear with great workmanship, this gear can perfect replacement for the old one.Wide range of applications, can be used in chemical, food processing, woodworking machinery, etc.\u003c\/li\u003e\n \u003cli\u003eFixed Double GearProduct Part Number: S\/N: CJ0618-024; Product Specifications: Modulus M2.25; Height: Approx. 45mm \/ 1.8in; Diameter: Approx. 30mm \/ 1.2in;Number of Teeth: T29xT21\u003c\/li\u003e\n \u003cli\u003eSliding Double GearProduct Part Number: S\/N: CJ0618-014; Product Specifications: Modulus M2.25;Height: Approx. 25mm \/ 1in; Diameter: Approx. 12mm \/ 0.5in; Number of Teeth: T20xT12\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7085842202804,"title":"Boston Warehouse Turtle Utensil Holder, Wire","handle":"boston-warehouse-turtle-utensil-holder-wire","description":"\u003ch3\u003eBoston Warehouse Turtle Utensil Holder, Wire\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Boston Warehouse untensil holder is the perfect décor piece for your\nhouse! Keep your kitchen utensils organized and handy. The turtle design adds\nserious charm to your home and will bring a smile to your face time and time\nagain. To clean, simply wipe clean with a damp cloth. Designed for you by\nBoston Warehouse - creative ideas for home entertaining!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eStore utensils neatly on the countertop within easy reach with this charming turtle utensil holder\u003c\/li\u003e\n \u003cli\u003eThis utensil holder is just the right height to keep long-handled tools upright for easy access; measures 5.5 x 6.75 inches\u003c\/li\u003e\n \u003cli\u003eMade of metal; to clean, wipe with a damp cloth or hand wash in warm, soapy water\u003c\/li\u003e\n \u003cli\u003eLook for more creative ideas for your home and kitchen from Boston Warehouse\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T13:13:06+11:00","created_at":"2022-03-18T13:13:06+11:00","vendor":"Boston Warehouse","type":"Change Gears","tags":["auspowers_batchone"],"price":12400,"price_min":12400,"price_max":12400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41333382611124,"title":"Utensil Holder","option1":"Utensil Holder","option2":null,"option3":null,"sku":"B08LW28YR6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Boston Warehouse Turtle Utensil Holder, Wire - Utensil Holder","public_title":"Utensil Holder","options":["Utensil Holder"],"price":12400,"weight":265,"compare_at_price":null,"inventory_management":null,"barcode":"0026602509833","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B08LW28YR6.jpg?v=1648545226"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B08LW28YR6.jpg?v=1648545226","options":["Style Name"],"media":[{"alt":"[Australia - AusPower] - Boston Warehouse Turtle Utensil Holder, Wire ","id":25344345276596,"position":1,"preview_image":{"aspect_ratio":0.79,"height":2177,"width":1720,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B08LW28YR6.jpg?v=1648545226"},"aspect_ratio":0.79,"height":2177,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B08LW28YR6.jpg?v=1648545226","width":1720}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eBoston Warehouse Turtle Utensil Holder, Wire\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis Boston Warehouse untensil holder is the perfect décor piece for your\nhouse! Keep your kitchen utensils organized and handy. The turtle design adds\nserious charm to your home and will bring a smile to your face time and time\nagain. To clean, simply wipe clean with a damp cloth. Designed for you by\nBoston Warehouse - creative ideas for home entertaining!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eStore utensils neatly on the countertop within easy reach with this charming turtle utensil holder\u003c\/li\u003e\n \u003cli\u003eThis utensil holder is just the right height to keep long-handled tools upright for easy access; measures 5.5 x 6.75 inches\u003c\/li\u003e\n \u003cli\u003eMade of metal; to clean, wipe with a damp cloth or hand wash in warm, soapy water\u003c\/li\u003e\n \u003cli\u003eLook for more creative ideas for your home and kitchen from Boston Warehouse\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7085842104500,"title":"CNBTR 45 Steel Silver 6mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2","handle":"cnbtr-45-steel-silver-6mm-hole-diameter-tapered-bevel-gear-wheel-20-teeth-pack-of-2","description":"\u003ch3\u003eCNBTR 45 Steel Silver 6mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Color: Silver Material: 45 Steel Teeth number: 20 Modulus: 1\nInner Diamter: 6mm\/0.24\" Maximum Outer Diameter: 22mm\/0.87\"Total length: 18MM\nTotal Size: 21x18mm\/0.82x0.7\"(ODxT) Weight: 66g Feature: 1. 1 Modulus, 20\nteeth, 6mm hole diameter. 2. Made of 45 steel with high wear-resistance, long\nservice life. 3. Used widely in conveying, agricultural equipment, textile\nmachinery, printing machinery, automotive applications, etc. Note: 1:1 bevel\ngear wheel can only used with 1:1 gear wheel, and can not match the other\nmodulus of teeth. Package Include: 2 x Tapered Bevel Gear Wheel\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eMade of 45 steel with high wear-resistance, strong and durable.\u003c\/li\u003e\n \u003cli\u003eTapered Bevel Gear Wheel, 1 Modulus, 20 teeth, 6mm hole diameter.\u003c\/li\u003e\n \u003cli\u003eUsed widely in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T13:12:51+11:00","created_at":"2022-03-18T13:12:51+11:00","vendor":"CNBTR","type":"Bevel Gears","tags":["auspowers_batchone"],"price":10400,"price_min":10400,"price_max":10400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41333382512820,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B06Y5MYTTZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"CNBTR 45 Steel Silver 6mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2","public_title":null,"options":["Default Title"],"price":10400,"weight":47,"compare_at_price":null,"inventory_management":null,"barcode":"6930584272866","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B06Y5MYTTZ.jpg?v=1648545217","\/\/auspowers.com\/cdn\/shop\/products\/715jM8Mj6dL.jpg?v=1647569572","\/\/auspowers.com\/cdn\/shop\/products\/71Xn8iBFpUL.jpg?v=1647569572","\/\/auspowers.com\/cdn\/shop\/products\/71tMP3IQqML.jpg?v=1647569572","\/\/auspowers.com\/cdn\/shop\/products\/81fSn8TQtsL.jpg?v=1647569572","\/\/auspowers.com\/cdn\/shop\/products\/7120AiE5teL.jpg?v=1647569572","\/\/auspowers.com\/cdn\/shop\/products\/51rMTNPUNdL.jpg?v=1647569572"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B06Y5MYTTZ.jpg?v=1648545217","options":["Title"],"media":[{"alt":"[Australia - AusPower] - CNBTR 45 Steel Silver 6mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2 ","id":25344343965876,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B06Y5MYTTZ.jpg?v=1648545217"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B06Y5MYTTZ.jpg?v=1648545217","width":2000},{"alt":"[Australia - AusPower] - CNBTR 45 Steel Silver 6mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2 ","id":25198216937652,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/715jM8Mj6dL.jpg?v=1647569572"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/715jM8Mj6dL.jpg?v=1647569572","width":2000},{"alt":"[Australia - AusPower] - CNBTR 45 Steel Silver 6mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2 ","id":25198216970420,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71Xn8iBFpUL.jpg?v=1647569572"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71Xn8iBFpUL.jpg?v=1647569572","width":2000},{"alt":"[Australia - AusPower] - CNBTR 45 Steel Silver 6mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2 ","id":25198217003188,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71tMP3IQqML.jpg?v=1647569572"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71tMP3IQqML.jpg?v=1647569572","width":2000},{"alt":"[Australia - AusPower] - CNBTR 45 Steel Silver 6mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2 ","id":25198217035956,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81fSn8TQtsL.jpg?v=1647569572"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81fSn8TQtsL.jpg?v=1647569572","width":2000},{"alt":"[Australia - AusPower] - CNBTR 45 Steel Silver 6mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2 ","id":25198217068724,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/7120AiE5teL.jpg?v=1647569572"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/7120AiE5teL.jpg?v=1647569572","width":1000},{"alt":"[Australia - AusPower] - CNBTR 45 Steel Silver 6mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2 ","id":25198217101492,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51rMTNPUNdL.jpg?v=1647569572"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51rMTNPUNdL.jpg?v=1647569572","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eCNBTR 45 Steel Silver 6mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Color: Silver Material: 45 Steel Teeth number: 20 Modulus: 1\nInner Diamter: 6mm\/0.24\" Maximum Outer Diameter: 22mm\/0.87\"Total length: 18MM\nTotal Size: 21x18mm\/0.82x0.7\"(ODxT) Weight: 66g Feature: 1. 1 Modulus, 20\nteeth, 6mm hole diameter. 2. Made of 45 steel with high wear-resistance, long\nservice life. 3. Used widely in conveying, agricultural equipment, textile\nmachinery, printing machinery, automotive applications, etc. Note: 1:1 bevel\ngear wheel can only used with 1:1 gear wheel, and can not match the other\nmodulus of teeth. Package Include: 2 x Tapered Bevel Gear Wheel\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eMade of 45 steel with high wear-resistance, strong and durable.\u003c\/li\u003e\n \u003cli\u003eTapered Bevel Gear Wheel, 1 Modulus, 20 teeth, 6mm hole diameter.\u003c\/li\u003e\n \u003cli\u003eUsed widely in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7086844248244,"title":"CNBTR 0.5 Modulus Brass Gear Shaft Set 6mm Hole Dia + 50T Brass Wheel Set 1:50 Reduction Ratio","handle":"cnbtr-0-5-modulus-brass-gear-shaft-set-6mm-hole-dia-50t-brass-wheel-set-1-50-reduction-ratio","description":"\u003ch3\u003eCNBTR 0.5 Modulus Brass Gear Shaft Set 6mm Hole Dia + 50T Brass Wheel Set 1:50 Reduction Ratio\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecifications: Material: Brass Brand name: CNBTR Reduction Ratio: 1:50\nModulus: 0.5 Gear Wheel T :50 Gear Wheel T Dia: 26.2mm Gear Wheel Step Size:\n20x7mm\/0.79x0.28inch(Dia x H) Wheel Size: 12x26x6mm\/0.47x1.02x0.24inch( H x OD\nx ID) Shaft Size: 20x11.7x6mm\/0.79x0.46x0.24inch( H x OD x ID) Weight: 47g\nFeatures: 1.Include one 0.5 modulus brass gear shaft and one 50 T brass gear\nwheel. 2.The transmission structure of shaft is simple, compact, small volume\nand light weight. 3.Shaft Z1=1, turn a round of gear T, can get a large\ntransmission ratio, generally in the power transmission, the transmission\nratio I=10-80, like big transmission ratio, if use with gear transmission,\nwill need to take the multi-stage transmission. 4.High quality material\nselection, carefully processing create high quality product. 5.Made of brass,\nlong time service. Package Content: 1 x Brass Gear Shaft 1 x Brass Wheel 2 x\nScrews The unique MPN label on each inner package, which confirm it passed the\nquality inspection and it is genuine item sold from our shop. Please offer it\nto us when you need assistance.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eInclude one 0.5 modulus brass gear shaft and one 50 T brass gear wheel.\u003c\/li\u003e\n \u003cli\u003eThe transmission structure of shaft is simple, compact, small volume and light weight.\u003c\/li\u003e\n \u003cli\u003eShaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission.\u003c\/li\u003e\n \u003cli\u003eHigh quality material selection, carefully processing create high quality product.\u003c\/li\u003e\n \u003cli\u003eMade of brass, long time service.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T05:27:46+11:00","created_at":"2022-03-19T05:27:46+11:00","vendor":"CNBTR","type":"Worm Gears","tags":["auspowers_batchone"],"price":9800,"price_min":9800,"price_max":9800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41336013357236,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07G5811RT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"CNBTR 0.5 Modulus Brass Gear Shaft Set 6mm Hole Dia + 50T Brass Wheel Set 1:50 Reduction Ratio","public_title":null,"options":["Default Title"],"price":9800,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":"993270885838","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07G5811RT.jpg?v=1648583266","\/\/auspowers.com\/cdn\/shop\/products\/71gf1-N8R_L_00fef4ad-fe7f-4d70-86b6-fcd1fdf7c1b0.jpg?v=1647628067","\/\/auspowers.com\/cdn\/shop\/products\/71gjglIBLOL.jpg?v=1647628067","\/\/auspowers.com\/cdn\/shop\/products\/7168sozHApL.jpg?v=1647628067","\/\/auspowers.com\/cdn\/shop\/products\/71G-b1JigjL_e37bb545-0ac9-418b-b205-bc3e35555c3d.jpg?v=1647628067"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07G5811RT.jpg?v=1648583266","options":["Title"],"media":[{"alt":"[Australia - AusPower] - CNBTR 0.5 Modulus Brass Gear Shaft Set 6mm Hole Dia + 50T Brass Wheel Set 1:50 Reduction Ratio ","id":25352100085940,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07G5811RT.jpg?v=1648583266"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07G5811RT.jpg?v=1648583266","width":2000},{"alt":"[Australia - AusPower] - CNBTR 0.5 Modulus Brass Gear Shaft Set 6mm Hole Dia + 50T Brass Wheel Set 1:50 Reduction Ratio ","id":25207632396468,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71gf1-N8R_L_00fef4ad-fe7f-4d70-86b6-fcd1fdf7c1b0.jpg?v=1647628067"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71gf1-N8R_L_00fef4ad-fe7f-4d70-86b6-fcd1fdf7c1b0.jpg?v=1647628067","width":2000},{"alt":"[Australia - AusPower] - CNBTR 0.5 Modulus Brass Gear Shaft Set 6mm Hole Dia + 50T Brass Wheel Set 1:50 Reduction Ratio ","id":25207632429236,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71gjglIBLOL.jpg?v=1647628067"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71gjglIBLOL.jpg?v=1647628067","width":2000},{"alt":"[Australia - AusPower] - CNBTR 0.5 Modulus Brass Gear Shaft Set 6mm Hole Dia + 50T Brass Wheel Set 1:50 Reduction Ratio ","id":25207632462004,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/7168sozHApL.jpg?v=1647628067"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/7168sozHApL.jpg?v=1647628067","width":2000},{"alt":"[Australia - AusPower] - CNBTR 0.5 Modulus Brass Gear Shaft Set 6mm Hole Dia + 50T Brass Wheel Set 1:50 Reduction Ratio ","id":25207632494772,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71G-b1JigjL_e37bb545-0ac9-418b-b205-bc3e35555c3d.jpg?v=1647628067"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71G-b1JigjL_e37bb545-0ac9-418b-b205-bc3e35555c3d.jpg?v=1647628067","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eCNBTR 0.5 Modulus Brass Gear Shaft Set 6mm Hole Dia + 50T Brass Wheel Set 1:50 Reduction Ratio\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecifications: Material: Brass Brand name: CNBTR Reduction Ratio: 1:50\nModulus: 0.5 Gear Wheel T :50 Gear Wheel T Dia: 26.2mm Gear Wheel Step Size:\n20x7mm\/0.79x0.28inch(Dia x H) Wheel Size: 12x26x6mm\/0.47x1.02x0.24inch( H x OD\nx ID) Shaft Size: 20x11.7x6mm\/0.79x0.46x0.24inch( H x OD x ID) Weight: 47g\nFeatures: 1.Include one 0.5 modulus brass gear shaft and one 50 T brass gear\nwheel. 2.The transmission structure of shaft is simple, compact, small volume\nand light weight. 3.Shaft Z1=1, turn a round of gear T, can get a large\ntransmission ratio, generally in the power transmission, the transmission\nratio I=10-80, like big transmission ratio, if use with gear transmission,\nwill need to take the multi-stage transmission. 4.High quality material\nselection, carefully processing create high quality product. 5.Made of brass,\nlong time service. Package Content: 1 x Brass Gear Shaft 1 x Brass Wheel 2 x\nScrews The unique MPN label on each inner package, which confirm it passed the\nquality inspection and it is genuine item sold from our shop. Please offer it\nto us when you need assistance.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eInclude one 0.5 modulus brass gear shaft and one 50 T brass gear wheel.\u003c\/li\u003e\n \u003cli\u003eThe transmission structure of shaft is simple, compact, small volume and light weight.\u003c\/li\u003e\n \u003cli\u003eShaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission.\u003c\/li\u003e\n \u003cli\u003eHigh quality material selection, carefully processing create high quality product.\u003c\/li\u003e\n \u003cli\u003eMade of brass, long time service.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7086832255156,"title":"Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project","handle":"worm-gear-set-20-1-bronze-worm-gear-wheel-and-metal-shaft-high-torsion-worm-gear-replace-for-4-1-industrial-robot-parts-for-diy-project","description":"\u003ch3\u003eWorm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification:Item Type: Worm Gear Gear Ratio: 20: 1 Material: Bronze worm\ngear wheel, metal shaft Package List:1 x Worm Gear Wheel 1 x Shaft Note:Worm\ngear wheel mounted on 4.7mm D-shaft diameter, worm gear shasft mounted on 6mm\nor 4.7mm D-type shaft\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCan replace 4: 1 worm gear, provide more torsion or slower output speed\u003c\/li\u003e\n \u003cli\u003eThe device reduces the chance of reverse drive to almost 0\u003c\/li\u003e\n \u003cli\u003eThe product is made of bronze worm gear wheel and metal shaft, durable and long service life\u003c\/li\u003e\n \u003cli\u003eSimple structure, easy to install and remove\u003c\/li\u003e\n \u003cli\u003eHigh quality and great processing, good accessories for industrial robot\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T05:21:24+11:00","created_at":"2022-03-19T05:21:24+11:00","vendor":"Thincol","type":"Worm Gears","tags":["auspowers_batchone"],"price":13700,"price_min":13700,"price_max":13700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41335999037620,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B08BLKG9T5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project","public_title":null,"options":["Default Title"],"price":13700,"weight":49,"compare_at_price":null,"inventory_management":null,"barcode":"3593539745438","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B08BLKG9T5.jpg?v=1648583092","\/\/auspowers.com\/cdn\/shop\/products\/611WGT6XdZL.jpg?v=1647627684","\/\/auspowers.com\/cdn\/shop\/products\/61b0S8L_jxL.jpg?v=1647627684","\/\/auspowers.com\/cdn\/shop\/products\/51XCZjlHDmL.jpg?v=1647627684","\/\/auspowers.com\/cdn\/shop\/products\/51Hi_zk7IjL.jpg?v=1647627684","\/\/auspowers.com\/cdn\/shop\/products\/51rSX6JlH1L.jpg?v=1647627684","\/\/auspowers.com\/cdn\/shop\/products\/510P5VM_WyL.jpg?v=1647627684","\/\/auspowers.com\/cdn\/shop\/products\/61uApIaNWVL.jpg?v=1647627684","\/\/auspowers.com\/cdn\/shop\/products\/51DpwLg9OtL.jpg?v=1647627684"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B08BLKG9T5.jpg?v=1648583092","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project ","id":25352076886196,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B08BLKG9T5.jpg?v=1648583092"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B08BLKG9T5.jpg?v=1648583092","width":1001},{"alt":"[Australia - AusPower] - Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project ","id":25207526097076,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/611WGT6XdZL.jpg?v=1647627684"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/611WGT6XdZL.jpg?v=1647627684","width":1001},{"alt":"[Australia - AusPower] - Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project ","id":25207526162612,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61b0S8L_jxL.jpg?v=1647627684"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61b0S8L_jxL.jpg?v=1647627684","width":1001},{"alt":"[Australia - AusPower] - Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project ","id":25207526228148,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51XCZjlHDmL.jpg?v=1647627684"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51XCZjlHDmL.jpg?v=1647627684","width":1001},{"alt":"[Australia - AusPower] - Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project ","id":25207526260916,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51Hi_zk7IjL.jpg?v=1647627684"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51Hi_zk7IjL.jpg?v=1647627684","width":1001},{"alt":"[Australia - AusPower] - Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project ","id":25207526326452,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51rSX6JlH1L.jpg?v=1647627684"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51rSX6JlH1L.jpg?v=1647627684","width":1001},{"alt":"[Australia - AusPower] - Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project ","id":25207526391988,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/510P5VM_WyL.jpg?v=1647627684"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/510P5VM_WyL.jpg?v=1647627684","width":1001},{"alt":"[Australia - AusPower] - Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project ","id":25207526457524,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61uApIaNWVL.jpg?v=1647627684"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61uApIaNWVL.jpg?v=1647627684","width":1001},{"alt":"[Australia - AusPower] - Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project ","id":25207526490292,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51DpwLg9OtL.jpg?v=1647627684"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51DpwLg9OtL.jpg?v=1647627684","width":1001}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eWorm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification:Item Type: Worm Gear Gear Ratio: 20: 1 Material: Bronze worm\ngear wheel, metal shaft Package List:1 x Worm Gear Wheel 1 x Shaft Note:Worm\ngear wheel mounted on 4.7mm D-shaft diameter, worm gear shasft mounted on 6mm\nor 4.7mm D-type shaft\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCan replace 4: 1 worm gear, provide more torsion or slower output speed\u003c\/li\u003e\n \u003cli\u003eThe device reduces the chance of reverse drive to almost 0\u003c\/li\u003e\n \u003cli\u003eThe product is made of bronze worm gear wheel and metal shaft, durable and long service life\u003c\/li\u003e\n \u003cli\u003eSimple structure, easy to install and remove\u003c\/li\u003e\n \u003cli\u003eHigh quality and great processing, good accessories for industrial robot\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7086828454068,"title":"Boston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500\" Bore, 2.625\" OD, 0.500\" Face Width, 40 Teeth 16 Inches 0.500 Inches 2.625 Inches","handle":"boston-gear-nb40a-spur-gear-steel-inch-16-pitch-0-500-bore-2-625-od-0-500-face-width-40-teeth-16-inches-0-500-inches-2-625-inches","description":"\u003ch3\u003eBoston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500\" Bore, 2.625\" OD, 0.500\" Face Width, 40 Teeth\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Boston Gear low carbon steel spur gear with 20-degree pressure angle (PA)\nand a diametral pitch (DP) of 16 transmits torque between parallel shafts to\nprovide rotational power to another part of a motorized system. It has a\n20-degree pressure angle for lower contact ratio between gears, resulting in\nhigher load capacity than smaller pressure angles, and a 16-diametral pitch\nfor applications requiring a balance between transferring torque and\ncontrolling changes in speed and direction of rotation with precision. This\nspur gear, which can mesh only with spur gears that have the same pressure\nangle and diametral pitch, is made of low carbon steel (.2 percent carbon) for\napplications where the hardness and strength of higher levels of carbon are\nnot needed to transmit torque and motion. This Boston Gear spur gear is\nsuitable for use in a variety of commercial and industrial applications, such\nas construction equipment, aeronautics, conveyors, and manufacturing\nequipment, among others.Spur gears, the most common gear type, have a circular\nor cylindrical shape with teeth bordering the outer perimeter and are used for\ntransmitting rotational torque and motion between parallel rotating shafts. A\nspur gear's pressure angle (PA), diametral pitch (also called DP or pitch),\nand its material are important factors to consider when purchasing. Gears come\nin several types for use in different power transmission configurations and\nfor different applications, including bevel and miter gears (for rotating\nshafts perpendicular to each other), change gears (to increase or decrease\ntorque and speed), helical gears (for high rates of rotational speed),\ninternal gears (where one gear is nested inside the other), rack and pinion\ngears (for turning rotational motion into linear motion), and worm gears (for\nperpendicular shafts in tight spaces and quiet operation). Gears are suitable\nfor use in the agriculture, automotive, construction, mining, and packaging\nindustries, and can be found in a variety of machines, including bicycles,\nautomobiles, and elevators, among others.Boston Gear manufactures a variety of\ngear drives, variable speed drives, clutches, and the components that comprise\nthese systems including sprockets and bearings. Their manufacturing designs,\nproduction, and inspection meet International Organization for Standardization\n(ISO) standards for quality assurance. The company, founded in 1877, is\nheadquartered in Charlotte, NC.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTransmits torque between parallel shafts to provide rotational power to another part of a motorized system\u003c\/li\u003e\n \u003cli\u003ePressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles\u003c\/li\u003e\n \u003cli\u003eDiametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision\u003c\/li\u003e\n \u003cli\u003eLow carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T05:19:19+11:00","created_at":"2022-03-19T05:19:19+11:00","vendor":"Boston Gear","type":"Spur Gears","tags":["auspowers_batchone"],"price":25700,"price_min":25700,"price_max":25700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41335994384564,"title":"0.500 Inches \/ 0.500 Inches \/ 2.625 Inches","option1":"0.500 Inches","option2":"0.500 Inches","option3":"2.625 Inches","sku":"B0026H3PYI","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Boston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500\" Bore, 2.625\" OD, 0.500\" Face Width, 40 Teeth 16 Inches 0.500 Inches 2.625 Inches - 0.500 Inches \/ 0.500 Inches \/ 2.625 Inches","public_title":"0.500 Inches \/ 0.500 Inches \/ 2.625 Inches","options":["0.500 Inches","0.500 Inches","2.625 Inches"],"price":25700,"weight":476,"compare_at_price":null,"inventory_management":null,"barcode":"781711102442","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B0026H3PYI.jpg?v=1648583023","\/\/auspowers.com\/cdn\/shop\/products\/612ek1J3OrL.jpg?v=1647627559","\/\/auspowers.com\/cdn\/shop\/products\/81kpuxuFp1L.jpg?v=1647627559"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B0026H3PYI.jpg?v=1648583023","options":["Bore Diameter String","Face Width","Item Diameter String"],"media":[{"alt":"[Australia - AusPower] - Boston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500\" Bore, 2.625\" OD, 0.500\" Face Width, 40 Teeth 16 Inches 0.500 Inches 2.625 Inches ","id":25352058798260,"position":1,"preview_image":{"aspect_ratio":1.069,"height":1123,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B0026H3PYI.jpg?v=1648583023"},"aspect_ratio":1.069,"height":1123,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B0026H3PYI.jpg?v=1648583023","width":1200},{"alt":"[Australia - AusPower] - Boston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500\" Bore, 2.625\" OD, 0.500\" Face Width, 40 Teeth 16 Inches 0.500 Inches 2.625 Inches ","id":25207455056052,"position":2,"preview_image":{"aspect_ratio":0.34,"height":1496,"width":508,"src":"\/\/auspowers.com\/cdn\/shop\/products\/612ek1J3OrL.jpg?v=1647627559"},"aspect_ratio":0.34,"height":1496,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/612ek1J3OrL.jpg?v=1647627559","width":508},{"alt":"[Australia - AusPower] - Boston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500\" Bore, 2.625\" OD, 0.500\" Face Width, 40 Teeth 16 Inches 0.500 Inches 2.625 Inches ","id":25207455088820,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1648,"width":1648,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81kpuxuFp1L.jpg?v=1647627559"},"aspect_ratio":1.0,"height":1648,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81kpuxuFp1L.jpg?v=1647627559","width":1648}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eBoston Gear NB40A Spur Gear, Steel, Inch, 16 Pitch, 0.500\" Bore, 2.625\" OD, 0.500\" Face Width, 40 Teeth\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Boston Gear low carbon steel spur gear with 20-degree pressure angle (PA)\nand a diametral pitch (DP) of 16 transmits torque between parallel shafts to\nprovide rotational power to another part of a motorized system. It has a\n20-degree pressure angle for lower contact ratio between gears, resulting in\nhigher load capacity than smaller pressure angles, and a 16-diametral pitch\nfor applications requiring a balance between transferring torque and\ncontrolling changes in speed and direction of rotation with precision. This\nspur gear, which can mesh only with spur gears that have the same pressure\nangle and diametral pitch, is made of low carbon steel (.2 percent carbon) for\napplications where the hardness and strength of higher levels of carbon are\nnot needed to transmit torque and motion. This Boston Gear spur gear is\nsuitable for use in a variety of commercial and industrial applications, such\nas construction equipment, aeronautics, conveyors, and manufacturing\nequipment, among others.Spur gears, the most common gear type, have a circular\nor cylindrical shape with teeth bordering the outer perimeter and are used for\ntransmitting rotational torque and motion between parallel rotating shafts. A\nspur gear's pressure angle (PA), diametral pitch (also called DP or pitch),\nand its material are important factors to consider when purchasing. Gears come\nin several types for use in different power transmission configurations and\nfor different applications, including bevel and miter gears (for rotating\nshafts perpendicular to each other), change gears (to increase or decrease\ntorque and speed), helical gears (for high rates of rotational speed),\ninternal gears (where one gear is nested inside the other), rack and pinion\ngears (for turning rotational motion into linear motion), and worm gears (for\nperpendicular shafts in tight spaces and quiet operation). Gears are suitable\nfor use in the agriculture, automotive, construction, mining, and packaging\nindustries, and can be found in a variety of machines, including bicycles,\nautomobiles, and elevators, among others.Boston Gear manufactures a variety of\ngear drives, variable speed drives, clutches, and the components that comprise\nthese systems including sprockets and bearings. Their manufacturing designs,\nproduction, and inspection meet International Organization for Standardization\n(ISO) standards for quality assurance. The company, founded in 1877, is\nheadquartered in Charlotte, NC.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTransmits torque between parallel shafts to provide rotational power to another part of a motorized system\u003c\/li\u003e\n \u003cli\u003ePressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles\u003c\/li\u003e\n \u003cli\u003eDiametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision\u003c\/li\u003e\n \u003cli\u003eLow carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7086828257460,"title":"Kimbrough 163 76 Tooth Spur Gear 48 Pitch","handle":"kimbrough-163-76-tooth-spur-gear-48-pitch","description":"\u003ch3\u003eKimbrough 163 76 Tooth Spur Gear 48 Pitch\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eKimbrough is recognized as one of the best aftermarket gear producers in the\nR\/C industry. Chuck Kimbrough Designed the tooling. With more than 30 years of\nplastic gear mold experience and more than fifteen years of experience racing\nR\/C cars, Chuck knew what it took to make the best R\/C car racing gears.\nKimbrough only produces the best through proper design, engineering,\nimplementation, and machining methods. You have raced the others, now race the\nbest!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePackage Dimensions: 1.4 cms (L) x 7.6 cms (W) x 9.1 cms (H)\u003c\/li\u003e\n \u003cli\u003eProduct Type: Hobbies\u003c\/li\u003e\n \u003cli\u003ePackage Quantity: 1\u003c\/li\u003e\n \u003cli\u003eCountry Of Origin: United States\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T05:19:13+11:00","created_at":"2022-03-19T05:19:13+11:00","vendor":"Kimbrough","type":"Spur Gears","tags":["auspowers_batchone"],"price":9300,"price_min":9300,"price_max":9300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41335994122420,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B000BOKH80","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Kimbrough 163 76 Tooth Spur Gear 48 Pitch","public_title":null,"options":["Default Title"],"price":9300,"weight":6,"compare_at_price":null,"inventory_management":null,"barcode":"0610960001636","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B000BOKH80.jpg?v=1648583019","\/\/auspowers.com\/cdn\/shop\/products\/61Vbuhu36rL.jpg?v=1647627553"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B000BOKH80.jpg?v=1648583019","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Kimbrough 163 76 Tooth Spur Gear 48 Pitch ","id":25352057684148,"position":1,"preview_image":{"aspect_ratio":1.25,"height":960,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B000BOKH80.jpg?v=1648583019"},"aspect_ratio":1.25,"height":960,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B000BOKH80.jpg?v=1648583019","width":1200},{"alt":"[Australia - AusPower] - Kimbrough 163 76 Tooth Spur Gear 48 Pitch ","id":25207452041396,"position":2,"preview_image":{"aspect_ratio":1.25,"height":960,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Vbuhu36rL.jpg?v=1647627553"},"aspect_ratio":1.25,"height":960,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Vbuhu36rL.jpg?v=1647627553","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eKimbrough 163 76 Tooth Spur Gear 48 Pitch\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eKimbrough is recognized as one of the best aftermarket gear producers in the\nR\/C industry. Chuck Kimbrough Designed the tooling. With more than 30 years of\nplastic gear mold experience and more than fifteen years of experience racing\nR\/C cars, Chuck knew what it took to make the best R\/C car racing gears.\nKimbrough only produces the best through proper design, engineering,\nimplementation, and machining methods. You have raced the others, now race the\nbest!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePackage Dimensions: 1.4 cms (L) x 7.6 cms (W) x 9.1 cms (H)\u003c\/li\u003e\n \u003cli\u003eProduct Type: Hobbies\u003c\/li\u003e\n \u003cli\u003ePackage Quantity: 1\u003c\/li\u003e\n \u003cli\u003eCountry Of Origin: United States\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7086810693812,"title":"uxcell 10pcs Plastic Gears 9 Teeth Model 092A Reduction Gear Plastic Worm Gears for RC Car Robot Motor","handle":"uxcell-10pcs-plastic-gears-9-teeth-model-092a-reduction-gear-plastic-worm-gears-for-rc-car-robot-motor","description":"\u003ch3\u003euxcell 10pcs Plastic Gears 9 Teeth Model 092A Reduction Gear Plastic Worm Gears for RC Car Robot Motor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more Feature - 100% Brand new and high\nquality.Provides a convenient choice for your DIY project More Choose - Our\nstore have the most complete specs gears shown in the following description,\nwhich can meet your DIY needs. Advantage - Good accessories for remote control\nRead more Application - Plastic Crown Gears suit for a science DIY project\nsuch as rc model electric robot and windmill, education such as displaying how\ngear ratios work, and any other family small motor DIY project. Application -\nPlastic Crown Gears suit for a science DIY project such as rc model car, model\nelectric robot and windmill, education such as displaying how gear ratios\nwork, and any other family small motor DIY project. Application - Plastic\nCrown Gears suit for a science DIY project such as rc model car, model\nelectric robot and windmill, education such as displaying how gear ratios\nwork, and any other family small motor DIY project. Application - Plastic\nCrown Gears suit for a science DIY project such as rc model car, model\nelectric robot and windmill, education such as displaying how gear ratios\nwork, and any other family small motor DIY project.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFeature - 100% Brand new and .Good accessories for Vehicle or remote control ,Provides a convenient choice for your DIY project\u003c\/li\u003e\n \u003cli\u003eSpecification - Plastic Gears Model 092A, 9 Teeth, 0.5 Modulus, 5.5mm Outer diameter, 5mm Thickness, 2mm Hole Diameter\u003c\/li\u003e\n \u003cli\u003eApplication - Plastic Crown Gears suit for a science DIY projects such as rc model car, model electric robot and windmill, education such as displaying how gear ratios work, and any other family small motor DIY project.\u003c\/li\u003e\n \u003cli\u003eMore Choose - Our store have the most complete specs gears shown in the following description, which can meet your DIY needs.\u003c\/li\u003e\n \u003cli\u003ePackage Content - 10pcs Plastic Gears 9 Teeth Model 092A Reduction Gear Plastic Worm Gears for RC Car Robot Motor\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T05:09:28+11:00","created_at":"2022-03-19T05:09:28+11:00","vendor":"uxcell","type":"Worm Gears","tags":["auspowers_batchone"],"price":8100,"price_min":8100,"price_max":8100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41335969579188,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07DH8QDPZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"uxcell 10pcs Plastic Gears 9 Teeth Model 092A Reduction Gear Plastic Worm Gears for RC Car Robot Motor","public_title":null,"options":["Default Title"],"price":8100,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":"993270657633","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07DH8QDPZ.jpg?v=1648582686","\/\/auspowers.com\/cdn\/shop\/products\/71su9Er_XIL.jpg?v=1647626968","\/\/auspowers.com\/cdn\/shop\/products\/81YcLEoGl9L.jpg?v=1647626968"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07DH8QDPZ.jpg?v=1648582686","options":["Title"],"media":[{"alt":"[Australia - AusPower] - uxcell 10pcs Plastic Gears 9 Teeth Model 092A Reduction Gear Plastic Worm Gears for RC Car Robot Motor ","id":25351873167540,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07DH8QDPZ.jpg?v=1648582686"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07DH8QDPZ.jpg?v=1648582686","width":1100},{"alt":"[Australia - AusPower] - uxcell 10pcs Plastic Gears 9 Teeth Model 092A Reduction Gear Plastic Worm Gears for RC Car Robot Motor ","id":25207334043828,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71su9Er_XIL.jpg?v=1647626968"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71su9Er_XIL.jpg?v=1647626968","width":1100},{"alt":"[Australia - AusPower] - uxcell 10pcs Plastic Gears 9 Teeth Model 092A Reduction Gear Plastic Worm Gears for RC Car Robot Motor ","id":25207334076596,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81YcLEoGl9L.jpg?v=1647626968"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81YcLEoGl9L.jpg?v=1647626968","width":1100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003euxcell 10pcs Plastic Gears 9 Teeth Model 092A Reduction Gear Plastic Worm Gears for RC Car Robot Motor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more Feature - 100% Brand new and high\nquality.Provides a convenient choice for your DIY project More Choose - Our\nstore have the most complete specs gears shown in the following description,\nwhich can meet your DIY needs. Advantage - Good accessories for remote control\nRead more Application - Plastic Crown Gears suit for a science DIY project\nsuch as rc model electric robot and windmill, education such as displaying how\ngear ratios work, and any other family small motor DIY project. Application -\nPlastic Crown Gears suit for a science DIY project such as rc model car, model\nelectric robot and windmill, education such as displaying how gear ratios\nwork, and any other family small motor DIY project. Application - Plastic\nCrown Gears suit for a science DIY project such as rc model car, model\nelectric robot and windmill, education such as displaying how gear ratios\nwork, and any other family small motor DIY project. Application - Plastic\nCrown Gears suit for a science DIY project such as rc model car, model\nelectric robot and windmill, education such as displaying how gear ratios\nwork, and any other family small motor DIY project.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFeature - 100% Brand new and .Good accessories for Vehicle or remote control ,Provides a convenient choice for your DIY project\u003c\/li\u003e\n \u003cli\u003eSpecification - Plastic Gears Model 092A, 9 Teeth, 0.5 Modulus, 5.5mm Outer diameter, 5mm Thickness, 2mm Hole Diameter\u003c\/li\u003e\n \u003cli\u003eApplication - Plastic Crown Gears suit for a science DIY projects such as rc model car, model electric robot and windmill, education such as displaying how gear ratios work, and any other family small motor DIY project.\u003c\/li\u003e\n \u003cli\u003eMore Choose - Our store have the most complete specs gears shown in the following description, which can meet your DIY needs.\u003c\/li\u003e\n \u003cli\u003ePackage Content - 10pcs Plastic Gears 9 Teeth Model 092A Reduction Gear Plastic Worm Gears for RC Car Robot Motor\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7086801911988,"title":"Spur Gear, 20 Degree Pressure Angle, Polyoxymethylene, Inch, 48 Pitch, 0.458\" Pitch Diameter, 5\/32\" Bore, 0.500\" OD, 1\/8\" Face Width, 22 Teeth 0.458 inches 10","handle":"spur-gear-20-degree-pressure-angle-polyoxymethylene-inch-48-pitch-0-458-pitch-diameter-5-32-bore-0-500-od-1-8-face-width-22-teeth-0-458-inches-10","description":"\u003ch3\u003eSpur Gear, 20 Degree Pressure Angle, Polyoxymethylene, Inch, 48 Pitch, 0.458\" Pitch Diameter, 5\/32\" Bore, 0.500\" OD, 1\/8\" Face Width, 22 Teeth\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis polyoxymethylene spur gear with 20-degree pressure angle (PA) and a\ndiametral pitch (DP) of 48 transmits torque between parallel shafts to provide\nrotational power to another part of a motorized system. It has a 20-degree\npressure angle for lower contact ratio between gears, resulting in higher load\ncapacity than smaller pressure angles, and a 48-diametral pitch for\napplications for applications where controlling changes in speed and direction\nof rotation with precision is more important than transferring torque. This\nspur gear, which can mesh only with spur gears that have the same pressure\nangle and diametral pitch, is made of polyoxymethylene for quiet operation,\nlow friction and moisture absorption, and high resistance to heat and\nabrasion. This SmallParts spur gear is suitable for use in a variety of\ncommercial and industrial applications, such as construction equipment,\naeronautics, conveyors, and manufacturing equipment, among others.Spur gears,\nthe most common gear type, have a circular or cylindrical shape with teeth\nbordering the outer perimeter and are used for transmitting rotational torque\nand motion between parallel rotating shafts. A spur gear's pressure angle\n(PA), diametral pitch (also called DP or pitch), and its material are\nimportant factors to consider when purchasing. Gears come in several types for\nuse in different power transmission configurations and for different\napplications, including bevel and miter gears (for rotating shafts\nperpendicular to each other), change gears (to increase or decrease torque and\nspeed), helical gears (for high rates of rotational speed), internal gears\n(where one gear is nested inside the other), rack and pinion gears (for\nturning rotational motion into linear motion), and worm gears (for\nperpendicular shafts in tight spaces and quiet operation). Gears are suitable\nfor use in the agriculture, automotive, construction, mining, and packaging\nindustries, and can be found in a variety of machines, including bicycles,\nautomobiles, and elevators, among others.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTransmits torque between parallel shafts to provide rotational power to another part of a motorized system\u003c\/li\u003e\n \u003cli\u003ePressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles\u003c\/li\u003e\n \u003cli\u003eDiametral pitch of 48 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque\u003c\/li\u003e\n \u003cli\u003ePolyoxymethylene for quiet operation, low friction and moisture absorption, and high resistance to heat and abrasion\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T05:04:17+11:00","created_at":"2022-03-19T05:04:17+11:00","vendor":"Small Parts","type":"Spur Gears","tags":["auspowers_batchone"],"price":8000,"price_min":8000,"price_max":8000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41335958405300,"title":"10 \/ 0.458 inches","option1":"10","option2":"0.458 inches","option3":null,"sku":"B000FMW5GU","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spur Gear, 20 Degree Pressure Angle, Polyoxymethylene, Inch, 48 Pitch, 0.458\" Pitch Diameter, 5\/32\" Bore, 0.500\" OD, 1\/8\" Face Width, 22 Teeth 0.458 inches 10 - 10 \/ 0.458 inches","public_title":"10 \/ 0.458 inches","options":["10","0.458 inches"],"price":8000,"weight":23,"compare_at_price":null,"inventory_management":null,"barcode":"48-022B156-PK10","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B000FMW5GU.jpg?v=1648582522","\/\/auspowers.com\/cdn\/shop\/products\/61qCcKkcNBL.jpg?v=1647626657","\/\/auspowers.com\/cdn\/shop\/products\/813zLQwib0L.jpg?v=1647626657"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B000FMW5GU.jpg?v=1648582522","options":["Number of Items","Size"],"media":[{"alt":"[Australia - AusPower] - Spur Gear, 20 Degree Pressure Angle, Polyoxymethylene, Inch, 48 Pitch, 0.458\" Pitch Diameter, 5\/32\" Bore, 0.500\" OD, 1\/8\" Face Width, 22 Teeth 0.458 inches 10 ","id":25351844692148,"position":1,"preview_image":{"aspect_ratio":0.788,"height":1236,"width":974,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B000FMW5GU.jpg?v=1648582522"},"aspect_ratio":0.788,"height":1236,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B000FMW5GU.jpg?v=1648582522","width":974},{"alt":"[Australia - AusPower] - Spur Gear, 20 Degree Pressure Angle, Polyoxymethylene, Inch, 48 Pitch, 0.458\" Pitch Diameter, 5\/32\" Bore, 0.500\" OD, 1\/8\" Face Width, 22 Teeth 0.458 inches 10 ","id":25207266738356,"position":2,"preview_image":{"aspect_ratio":0.296,"height":2560,"width":757,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61qCcKkcNBL.jpg?v=1647626657"},"aspect_ratio":0.296,"height":2560,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61qCcKkcNBL.jpg?v=1647626657","width":757},{"alt":"[Australia - AusPower] - Spur Gear, 20 Degree Pressure Angle, Polyoxymethylene, Inch, 48 Pitch, 0.458\" Pitch Diameter, 5\/32\" Bore, 0.500\" OD, 1\/8\" Face Width, 22 Teeth 0.458 inches 10 ","id":25207266771124,"position":3,"preview_image":{"aspect_ratio":1.002,"height":2556,"width":2560,"src":"\/\/auspowers.com\/cdn\/shop\/products\/813zLQwib0L.jpg?v=1647626657"},"aspect_ratio":1.002,"height":2556,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/813zLQwib0L.jpg?v=1647626657","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eSpur Gear, 20 Degree Pressure Angle, Polyoxymethylene, Inch, 48 Pitch, 0.458\" Pitch Diameter, 5\/32\" Bore, 0.500\" OD, 1\/8\" Face Width, 22 Teeth\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis polyoxymethylene spur gear with 20-degree pressure angle (PA) and a\ndiametral pitch (DP) of 48 transmits torque between parallel shafts to provide\nrotational power to another part of a motorized system. It has a 20-degree\npressure angle for lower contact ratio between gears, resulting in higher load\ncapacity than smaller pressure angles, and a 48-diametral pitch for\napplications for applications where controlling changes in speed and direction\nof rotation with precision is more important than transferring torque. This\nspur gear, which can mesh only with spur gears that have the same pressure\nangle and diametral pitch, is made of polyoxymethylene for quiet operation,\nlow friction and moisture absorption, and high resistance to heat and\nabrasion. This SmallParts spur gear is suitable for use in a variety of\ncommercial and industrial applications, such as construction equipment,\naeronautics, conveyors, and manufacturing equipment, among others.Spur gears,\nthe most common gear type, have a circular or cylindrical shape with teeth\nbordering the outer perimeter and are used for transmitting rotational torque\nand motion between parallel rotating shafts. A spur gear's pressure angle\n(PA), diametral pitch (also called DP or pitch), and its material are\nimportant factors to consider when purchasing. Gears come in several types for\nuse in different power transmission configurations and for different\napplications, including bevel and miter gears (for rotating shafts\nperpendicular to each other), change gears (to increase or decrease torque and\nspeed), helical gears (for high rates of rotational speed), internal gears\n(where one gear is nested inside the other), rack and pinion gears (for\nturning rotational motion into linear motion), and worm gears (for\nperpendicular shafts in tight spaces and quiet operation). Gears are suitable\nfor use in the agriculture, automotive, construction, mining, and packaging\nindustries, and can be found in a variety of machines, including bicycles,\nautomobiles, and elevators, among others.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTransmits torque between parallel shafts to provide rotational power to another part of a motorized system\u003c\/li\u003e\n \u003cli\u003ePressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles\u003c\/li\u003e\n \u003cli\u003eDiametral pitch of 48 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque\u003c\/li\u003e\n \u003cli\u003ePolyoxymethylene for quiet operation, low friction and moisture absorption, and high resistance to heat and abrasion\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7086800928948,"title":"uxcell 50pcs Plastic Gears 12 Teeth Model 122.5A Reduction Gear Plastic Worm Gears for RC Car Robot Motor","handle":"uxcell-50pcs-plastic-gears-12-teeth-model-122-5a-reduction-gear-plastic-worm-gears-for-rc-car-robot-motor","description":"\u003ch3\u003euxcell 50pcs Plastic Gears 12 Teeth Model 122.5A Reduction Gear Plastic Worm Gears for RC Car Robot Motor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more Feature - 100% Brand new and high\nquality.Provides a convenient choice for your DIY project More Choose - Our\nstore have the most complete specs gears shown in the following description,\nwhich can meet your DIY needs. Advantage - Good accessories for remote control\nRead more Application - Plastic Crown Gears suit for a science DIY project\nsuch as rc model electric robot and windmill, education such as displaying how\ngear ratios work, and any other family small motor DIY project. Application -\nPlastic Crown Gears suit for a science DIY project such as rc model car, model\nelectric robot and windmill, education such as displaying how gear ratios\nwork, and any other family small motor DIY project. Application - Plastic\nCrown Gears suit for a science DIY project such as rc model car, model\nelectric robot and windmill, education such as displaying how gear ratios\nwork, and any other family small motor DIY project. Application - Plastic\nCrown Gears suit for a science DIY project such as rc model car, model\nelectric robot and windmill, education such as displaying how gear ratios\nwork, and any other family small motor DIY project.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFeature - 100% Brand new and .Good accessories for Vehicle or remote control ,Provides a convenient choice for your DIY project\u003c\/li\u003e\n \u003cli\u003eSpecification - Plastic Gears Model 122.5A, 12 Teeth, 0.5 Modulus, 7mm Outer diameter, 5mm Thickness, 2mm Hole Diameter\u003c\/li\u003e\n \u003cli\u003eApplication - Plastic Crown Gears suit for science DIY projects such as rc model car, model electric robot and windmill, education such as displaying how gear ratios work, and any other family small motor DIY project.\u003c\/li\u003e\n \u003cli\u003eMore Choose - Our store have the most complete specs gears shown in the following description, which can meet your DIY needs.\u003c\/li\u003e\n \u003cli\u003ePackage Content - 50pcs Plastic Gears 12 Teeth Model 122.5A Reduction Gear Plastic Worm Gears for RC Car Robot Motor\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T05:03:41+11:00","created_at":"2022-03-19T05:03:41+11:00","vendor":"uxcell","type":"Worm Gears","tags":["auspowers_batchone"],"price":8100,"price_min":8100,"price_max":8100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41335956701364,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07DH8FSP4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"uxcell 50pcs Plastic Gears 12 Teeth Model 122.5A Reduction Gear Plastic Worm Gears for RC Car Robot Motor","public_title":null,"options":["Default Title"],"price":8100,"weight":11,"compare_at_price":null,"inventory_management":null,"barcode":"784958207383","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07DH8FSP4.jpg?v=1648582504","\/\/auspowers.com\/cdn\/shop\/products\/71xlbg8gRSL_f51ed4eb-d9ad-43b8-9aac-83b5b1cab8dc.jpg?v=1647626621","\/\/auspowers.com\/cdn\/shop\/products\/81Xl5XH1Z-L.jpg?v=1647626621"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07DH8FSP4.jpg?v=1648582504","options":["Title"],"media":[{"alt":"[Australia - AusPower] - uxcell 50pcs Plastic Gears 12 Teeth Model 122.5A Reduction Gear Plastic Worm Gears for RC Car Robot Motor ","id":25351842103476,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07DH8FSP4.jpg?v=1648582504"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07DH8FSP4.jpg?v=1648582504","width":1100},{"alt":"[Australia - AusPower] - uxcell 50pcs Plastic Gears 12 Teeth Model 122.5A Reduction Gear Plastic Worm Gears for RC Car Robot Motor ","id":25207252222132,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71xlbg8gRSL_f51ed4eb-d9ad-43b8-9aac-83b5b1cab8dc.jpg?v=1647626621"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71xlbg8gRSL_f51ed4eb-d9ad-43b8-9aac-83b5b1cab8dc.jpg?v=1647626621","width":1100},{"alt":"[Australia - AusPower] - uxcell 50pcs Plastic Gears 12 Teeth Model 122.5A Reduction Gear Plastic Worm Gears for RC Car Robot Motor ","id":25207252254900,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81Xl5XH1Z-L.jpg?v=1647626621"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81Xl5XH1Z-L.jpg?v=1647626621","width":1100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003euxcell 50pcs Plastic Gears 12 Teeth Model 122.5A Reduction Gear Plastic Worm Gears for RC Car Robot Motor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRead more Feature - 100% Brand new and high\nquality.Provides a convenient choice for your DIY project More Choose - Our\nstore have the most complete specs gears shown in the following description,\nwhich can meet your DIY needs. Advantage - Good accessories for remote control\nRead more Application - Plastic Crown Gears suit for a science DIY project\nsuch as rc model electric robot and windmill, education such as displaying how\ngear ratios work, and any other family small motor DIY project. Application -\nPlastic Crown Gears suit for a science DIY project such as rc model car, model\nelectric robot and windmill, education such as displaying how gear ratios\nwork, and any other family small motor DIY project. Application - Plastic\nCrown Gears suit for a science DIY project such as rc model car, model\nelectric robot and windmill, education such as displaying how gear ratios\nwork, and any other family small motor DIY project. Application - Plastic\nCrown Gears suit for a science DIY project such as rc model car, model\nelectric robot and windmill, education such as displaying how gear ratios\nwork, and any other family small motor DIY project.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFeature - 100% Brand new and .Good accessories for Vehicle or remote control ,Provides a convenient choice for your DIY project\u003c\/li\u003e\n \u003cli\u003eSpecification - Plastic Gears Model 122.5A, 12 Teeth, 0.5 Modulus, 7mm Outer diameter, 5mm Thickness, 2mm Hole Diameter\u003c\/li\u003e\n \u003cli\u003eApplication - Plastic Crown Gears suit for science DIY projects such as rc model car, model electric robot and windmill, education such as displaying how gear ratios work, and any other family small motor DIY project.\u003c\/li\u003e\n \u003cli\u003eMore Choose - Our store have the most complete specs gears shown in the following description, which can meet your DIY needs.\u003c\/li\u003e\n \u003cli\u003ePackage Content - 50pcs Plastic Gears 12 Teeth Model 122.5A Reduction Gear Plastic Worm Gears for RC Car Robot Motor\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7086795686068,"title":"Othmro 30pcs Plastic Gears 8 Teeth Model 082A Reduction Gear Plastic Worm Gears for RC Car Robot Motor","handle":"othmro-30pcs-plastic-gears-8-teeth-model-082a-reduction-gear-plastic-worm-gears-for-rc-car-robot-motor","description":"\u003ch3\u003eOthmro 30pcs Plastic Gears 8 Teeth Model 082A Reduction Gear Plastic Worm Gears for RC Car Robot Motor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePlastic Gear Description: 1.The plastic gear is made of high quality plastic,\nwearable and long service life. 2.Small parts, easy to use, great model making\naccessories for all kinds of cars, robots, etc. 3.Please carefully check\nwhether the product information meets your requirements before purchasing. If\nyou have any questions, please feel free to contact us! Technical parameters:\nBrand: Othmro Product Model: 082A Number of Teeth: 8 Outer Diameter: 5mm\/0.2\"\nHole Diameter: 2mm\/0.08\" Thickness: 5mm\/0.2\" Modulus: 0.5 Package content:30 x\nPlastic Gear Note: 1. Small parts. Not for children under 3 yrs. 2. Monitors\nare not calibrated same, item color displayed in photos may be showing\nslightly different from the real object. Please take the real one as standard.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e[Specification] - Plastic Gears Model 082A, 8 Theeth, 0.5 Modulus, 5mm Outer diameter, 5mm Thickness, 2mm Hole Diameter.\u003c\/li\u003e\n \u003cli\u003e[Feature] - 100% Brand new and high quality.Good accessories for Vehicle or remote control,provides a convenient choice for your DIY project.\u003c\/li\u003e\n \u003cli\u003e[Fuction]- The products are for toys spindle gear spare parts, suitable for DIY model technology production.They are also good replacement parts of old or broken gears.\u003c\/li\u003e\n \u003cli\u003e[Appliation] - Plastic Crown Gears suit for science DIY project such as rc model car, model electirc robot and windmill, education such as displaying how gear ratios work, and any other family small motor DIY project.\u003c\/li\u003e\n \u003cli\u003e[More Choose] - Our store have the most complete specs gears shown in the following description, which can meet your DIY needs.This is a plastic gear building your own gearbox with customized gear ratio.Ideal accessories for Vehicle or remote control, such as RC airplane,RC helicopter, tiny car and so on.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T05:00:53+11:00","created_at":"2022-03-19T05:00:53+11:00","vendor":"Othmro","type":"Worm Gears","tags":["auspowers_batchone"],"price":8300,"price_min":8300,"price_max":8300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41335927210164,"title":"082a","option1":"082a","option2":null,"option3":null,"sku":"B07XJ2N3QQ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Othmro 30pcs Plastic Gears 8 Teeth Model 082A Reduction Gear Plastic Worm Gears for RC Car Robot Motor - 082a","public_title":"082a","options":["082a"],"price":8300,"weight":6,"compare_at_price":null,"inventory_management":null,"barcode":"6111622360633","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07XJ2N3QQ.jpg?v=1648582427","\/\/auspowers.com\/cdn\/shop\/products\/51P1hcpBegL.jpg?v=1647626453","\/\/auspowers.com\/cdn\/shop\/products\/51GgJyHhjFL.jpg?v=1647626453","\/\/auspowers.com\/cdn\/shop\/products\/51UsXjn8oTL.jpg?v=1647626453"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07XJ2N3QQ.jpg?v=1648582427","options":["Color"],"media":[{"alt":"[Australia - AusPower] - Othmro 30pcs Plastic Gears 8 Teeth Model 082A Reduction Gear Plastic Worm Gears for RC Car Robot Motor ","id":25351832371380,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07XJ2N3QQ.jpg?v=1648582427"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07XJ2N3QQ.jpg?v=1648582427","width":1500},{"alt":"[Australia - AusPower] - Othmro 30pcs Plastic Gears 8 Teeth Model 082A Reduction Gear Plastic Worm Gears for RC Car Robot Motor ","id":25207192649908,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51P1hcpBegL.jpg?v=1647626453"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51P1hcpBegL.jpg?v=1647626453","width":1500},{"alt":"[Australia - AusPower] - Othmro 30pcs Plastic Gears 8 Teeth Model 082A Reduction Gear Plastic Worm Gears for RC Car Robot Motor ","id":25207192682676,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51GgJyHhjFL.jpg?v=1647626453"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51GgJyHhjFL.jpg?v=1647626453","width":1500},{"alt":"[Australia - AusPower] - Othmro 30pcs Plastic Gears 8 Teeth Model 082A Reduction Gear Plastic Worm Gears for RC Car Robot Motor ","id":25207192715444,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51UsXjn8oTL.jpg?v=1647626453"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51UsXjn8oTL.jpg?v=1647626453","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eOthmro 30pcs Plastic Gears 8 Teeth Model 082A Reduction Gear Plastic Worm Gears for RC Car Robot Motor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003ePlastic Gear Description: 1.The plastic gear is made of high quality plastic,\nwearable and long service life. 2.Small parts, easy to use, great model making\naccessories for all kinds of cars, robots, etc. 3.Please carefully check\nwhether the product information meets your requirements before purchasing. If\nyou have any questions, please feel free to contact us! Technical parameters:\nBrand: Othmro Product Model: 082A Number of Teeth: 8 Outer Diameter: 5mm\/0.2\"\nHole Diameter: 2mm\/0.08\" Thickness: 5mm\/0.2\" Modulus: 0.5 Package content:30 x\nPlastic Gear Note: 1. Small parts. Not for children under 3 yrs. 2. Monitors\nare not calibrated same, item color displayed in photos may be showing\nslightly different from the real object. Please take the real one as standard.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e[Specification] - Plastic Gears Model 082A, 8 Theeth, 0.5 Modulus, 5mm Outer diameter, 5mm Thickness, 2mm Hole Diameter.\u003c\/li\u003e\n \u003cli\u003e[Feature] - 100% Brand new and high quality.Good accessories for Vehicle or remote control,provides a convenient choice for your DIY project.\u003c\/li\u003e\n \u003cli\u003e[Fuction]- The products are for toys spindle gear spare parts, suitable for DIY model technology production.They are also good replacement parts of old or broken gears.\u003c\/li\u003e\n \u003cli\u003e[Appliation] - Plastic Crown Gears suit for science DIY project such as rc model car, model electirc robot and windmill, education such as displaying how gear ratios work, and any other family small motor DIY project.\u003c\/li\u003e\n \u003cli\u003e[More Choose] - Our store have the most complete specs gears shown in the following description, which can meet your DIY needs.This is a plastic gear building your own gearbox with customized gear ratio.Ideal accessories for Vehicle or remote control, such as RC airplane,RC helicopter, tiny car and so on.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}

{"id":7086792245428,"title":"Tuning Haus 1324 24 Tooth 64 Pitch Precision Aluminum Pinion Gear","handle":"tuning-haus-1324-24-tooth-64-pitch-precision-aluminum-pinion-gear","description":"\u003ch3\u003eTuning Haus 1324 24 Tooth 64 Pitch Precision Aluminum Pinion Gear\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eTuning Haus 64p pinions are lightweight, run true, and operate quietly.\nStarting with premium aluminum alloy, the pinions are manufactured, checked,\nand then hard anodized to an attractive gunmetal finish. Machined for a 3mm\nset screw (included), Tuning Haus accents the product with a large, easy to\nread size engraving.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePrecision Aluminum Construction\u003c\/li\u003e\n \u003cli\u003ePackage Dimensions: 10.6 H x 0.4 L x 9.6 W (centimeters)\u003c\/li\u003e\n \u003cli\u003ePackage Weight: 0.02 kilograms\u003c\/li\u003e\n \u003cli\u003eCountry of Origin : Philippines\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T04:59:03+11:00","created_at":"2022-03-19T04:59:03+11:00","vendor":"Tuning Haus","type":"Rack \u0026 Pinion Gears","tags":["auspowers_batchone"],"price":8500,"price_min":8500,"price_max":8500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41335915315380,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B01KV9HDFE","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Tuning Haus 1324 24 Tooth 64 Pitch Precision Aluminum Pinion Gear","public_title":null,"options":["Default Title"],"price":8500,"weight":20,"compare_at_price":null,"inventory_management":null,"barcode":"8110750223740","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B01KV9HDFE.jpg?v=1648582351"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B01KV9HDFE.jpg?v=1648582351","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Tuning Haus 1324 24 Tooth 64 Pitch Precision Aluminum Pinion Gear ","id":25351826669748,"position":1,"preview_image":{"aspect_ratio":0.864,"height":1673,"width":1446,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B01KV9HDFE.jpg?v=1648582351"},"aspect_ratio":0.864,"height":1673,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B01KV9HDFE.jpg?v=1648582351","width":1446}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTuning Haus 1324 24 Tooth 64 Pitch Precision Aluminum Pinion Gear\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eTuning Haus 64p pinions are lightweight, run true, and operate quietly.\nStarting with premium aluminum alloy, the pinions are manufactured, checked,\nand then hard anodized to an attractive gunmetal finish. Machined for a 3mm\nset screw (included), Tuning Haus accents the product with a large, easy to\nread size engraving.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePrecision Aluminum Construction\u003c\/li\u003e\n \u003cli\u003ePackage Dimensions: 10.6 H x 0.4 L x 9.6 W (centimeters)\u003c\/li\u003e\n \u003cli\u003ePackage Weight: 0.02 kilograms\u003c\/li\u003e\n \u003cli\u003eCountry of Origin : Philippines\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}