XGecu TL866II Plus USB Programmer Support SPI Flash NAND EPROM 8051 MCU PIC AVR GAL +SPI Driver+ SOIC 8-16 SMD Adapter
XGecu TL866II Plus USB Programmer Support SPI Flash NAND EPROM 8051 MCU PIC AVR GAL +SPI Driver+ SOIC 8-16 SMD Adapter
Description: Tl866ii Plus programmer is the improvement of Tl866cs/a programmer, difference is much higher programming speed (up to 2x) of high-capacity memories. It supports multi-programming mode (up to four). Well-designed good-value professional programmer, Production of high-density smd technology, a unified user interface, easy to use, fully functional, reliable program running of application software, ultra-small code -runs faster. The Outstanding advantages of Tl866II programmer 1. Support simultaneously working with 4 programmers on each computer 2. The Minimum Volume and the lowest Power Consumption and not overheat with constant use. 3. Do not need external power supply, the low power consumption of its own to ensure the USB port can provide enough power. 4. Best internal 40 pin over voltage protection, the strongest vcc/vpp 4-level overcurrent protection. The short-circuit should not reset the PC or programmer. 5. Support wide range of chips 15000+ ICs , support for serial and parallel series 40/44/48pin large capacity FLASH 6. Unique serial ICSP interface, supporting the serial download and high-speed parallel high voltage programming. Note: Tl866cs does not support ICSP. 7. Test CMOS4000 74/54 series integrated circuit. Error can be located in the gate circuit. 8. Chip auto serial number is complete and practical. 9. Original chip encryption operation on AVR microcontroller with internal RC Calibration byte. The decrypt software can not be directly run on another same type of chip. Support wide range of chips (please note: before buying, make sure the models you want to program are in the support list!) NAND FLASH: Samsung K9xxx, SK Hynix (ex Hynix) HY27xxx, H27xxx, Micron MT29Fxxx, NANDxxx, Spansion S34xxx, NAND Toshiba TH58NVGxxx. Serial NAND FLASH: Micron MT29Fxxx. Serial Flash: standard SPI, high performance Dual I/O SPI and Quad I/O SPI (25xxx, 26xxx, 45xx, MX26Lxxx ).DataFlash (AT45Dxxx, AT26Dxxx) Parallel NOR Flash: 28Fxxx, 29xxx, 49Fxxx series, Samsung'sK8Pxxxx, K8Dxxxx series, ... EPROM: NMOS/CMOS, 27xxx and 27Cxxx series; EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series; Serial E(E)PROM: 24XXX,25XXX series, Microcontrollers MCS51 series:89Cxxx, 89Sxxx, 89EXXX,89VXX; Microcontrollers Atmel AVR 8bit/16bit: AT90Sxxxx, ATtiny, ATmega series; Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx, PIC24xxx series GAL Programmable logic device programming and SRAM test I.C. Tester: TTL type: 54,74 S/LS/ALS/H/HC/HCT series; CMOS type: 4000, 4500 series; Static RAM: 6116 .. Specification Pin Dectected YES 1.8V supported YES NAND FLASH YES ISP for 24/93/25 MCU YES 25 Nor Flash Maximum capacity 512M Multi Programming(4) YES VPP Max.Voltage 18V VCC Voltage 1.8V-6.5V W29C020 P+V(S) 10.2S+2.4S W25X80 P+V(S) 9.3S+1.7S W25Q64 P+V(S) 69S+14.5S Supported Device List 15000+ ICs Front view of TL866II Plus This is one of the smallest products in the world and the dimensions are 10cm6cm2.5cm (it is as small as a driving license). In addition, you don't need to carry with an external power supply because of its ultra-low power that makes it more portable. Universal 40PIN ZIF socket You don't need to move or turn around the chip when programming, just congruously put the chip forward and the position of the ZIF socket handle is PIN1. The design is more consistent with usage habits. USB 2.0 Interface This programmer has Built-in MCU with high-performance and high- capacity USB 2.0 interface at the communication speed of 12Mbps being in line with (For each chip) well-designed programming algorithm and USB high-speed communications. ICSP Interface For some in-circuit serial programmable chips, you can program MCU by choosing ICSP port. You can get the clear diagram in the programming software for the ICSP port wiring method. That is to say, you can directly program and update the chip soldered on the board. Read more User-friendly interface Supports multi-language The user interface is well- designed and is in complete accord with the operating habit of the Windows series of software. Built-in binary editor is comparable to professional editing software. You can directly read, write and modify the files such as BIN format, HEX format, JED format and so on. In addition, it has the complete and practical project mode that makes the mass production more convenient and safer. Supports multi-language(English, Chinese, Russian, Polish, German, Spanish, Portuguese, Turkish), it can automatically identify the operating system to install and run under WIN 2000/WIN XP/WIN 2003/WIN 2008/WIN VISTA /WIN7/WIN8/WIN10 (32BIit/64Bit). Spi Driver, in Circuit Programming Adapter for Tl866II Plus Programmer You can upgrade SPI flash without removing the chip from board. This adapter is designed for the signal enhancement when doing in-circuit programming. There is a signal driver chip that can make in- circuit-programming signal stronger and make programming more reliable. It can greatly improve the success rate of the in-circuit-programming. It can make the in-circuit programming much easier. Read more What does the package include? One pcs TL866II Plus Programmer One pcs USB cable One pcs ICSP cable One pcs spi driver adapter One pcs SOIC 8-16 SMD adapter One pcs Maintenance card Please note: the package don't include CD, you can download documents on XGECU dot com Read more
Product Features
- 1. TL866II Plus programming speed is very fast. For example, 4Mbits FLASH ROM P+V (S): 36S; 32MB TE28F320 P+V (S): 32S+79S; 8Mbits 25P80 P+V (S): 9.3S+1.7S; 64MB W25Q64 P+V (S): 69S+14.5S
- 3. Support wide range of chips 15000+ , support for serial and parallel series 40/44/48PIN large capacity Flash, support NAND Flash. This package includes SPI driver and SOIC 8-16 SMD adapter, can program the SPI Flash chip in circuit, can make the in-circuit programming much easier.
- 4. Unique serial ICSP interface, supporting the serial download and high-speed parallel high voltage programming, and 24/25/93 Serial ISP supported
- 5. VPP and VCC programming voltages are independently program-controlled: programmable VCC is from 1.8V to 6.5V; VPP is from 1.8V to 18V