Creality Official Ender 3 V2 Screen Kit Intelligent 4.3 inch Color HD LCD Display Screen Replacement Screen Upgrade Kit for Ender 3/Pro/V2/3S with 32 Bit 4.2.2/4.2.7 Mainboard 3D Printer
Creality Official Ender 3 V2 Screen Kit Intelligent 4.3 inch Color HD LCD Display Screen Replacement Screen Upgrade Kit for Ender 3/Pro/V2/3S with 32 Bit 4.2.2/4.2.7 Mainboard 3D Printer
How to ugprade Original knob Screen into touch screen for Ender 3, Ender 3 Pro, Ender 3S(only support motherboard version 4.2.2 or 4.2.7)? Step 1: Power off your 3d printer. Step 2: Remove the old knob screen. Step 3: Remove the old knob screen cable. Step 4: Plug one end of new touch screen cable to new touch screen. Step 5: Tighten 3 sets of T-nut and screw on the chute, but please don't tighten them completely. Step 6: fix the chute on the side of the bottom profile. Step 7: Plug in the other end of the touch screen cable to mother board. Step 8: Refresh the firmware: Please visit Creality offical download page, download the Ender-3 series Touchscreen firmware. Store to a blank TF card.(Ender 3 V2 no need to refresh firmware, just replace the old screen.) Step 9: Insert the TF card to your printer. Step 10: Turn on your printer, wait a few seconds for the firmware to install.After finished, then you can start printing. Packing list 1 × Touch Screen Kit Please Note: 1)The screen can not work with 8 bit (V1.1.4 and V1.1.5) motherboard.There is no open source firmware for this screen now, the firmware can't be edited or customemized. 2)This screen works for Creality Ender 3 V2/Ender 3/Ender 3 Pro/Ender 3S with 32 bit V4.2.2 or V4.2.7 mainboard. Please don't use it for other printers. 3)This screen can't be used together with filament sensor.
Product Features
- It is 100% Creality original Ender 3 V2 color screen kit, also a screen upgrade kit for Ender 3/Pro/V2/3S with 32 bit 4.2.2/4.2.7 mainboard 3d printer.
- User-friendly UI interfaceBrand-new screen allows easier operation via its simple UI interface.
- Modular design Easy installationThe screen is tilted to make a wide vision and easy to operate. It can be fixed directly on the 3D printer base.
- If you have any question about this screen kit, please free to contact us!
Related Products
uxcell Common Cathode 10 Pin 1...
uxcell Common Cathode 10 Pin 1 Bit 7 Segment 1.1 x 0.79 x 0.35 Inch 0.55" Red LED Display Digital Tube 10pcs
$91.00 AUD
uxcell Common Cathode 10 Pin 1 Bit 7 Segment 1.1 x 0.79 x 0.35 Inch 0.55" Red LED Display Digital Tube 10pcs Used widely in home appliances, instruments, accessories, etc.specificationsProduct Name : LED Digital Display TubeType : Common CathodeModel : 5611AHCommon Cathode : 3-8Digital Display : 1 DigitDigital Number : 1 Bit 7 SegmentEmitted Col...
HiLetgo 1602 LCD Keypad Shield 1...
HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot
$87.00 AUD
HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot 1602 LCD module read and write operations, screen and cursor operations are programmed to achieve through the instructions. Note: 1- High level, 0 -Low level) Instruction1: clear display, instruction 01H, cursor reset to address 0...
HiLetgo 2pcs MAX7219 8-Digital S...
HiLetgo 2pcs MAX7219 8-Digital Segment Digital LED Display Tube for Arduino 51/AVR/STM32
$83.00 AUD
HiLetgo 2pcs MAX7219 8-Digital Segment Digital LED Display Tube for Arduino 51/AVR/STM32 Features: MAX7219 is an integrated serial input / output common-cathode display drivers, which connects the microprocessor and 8 digit 7-segment digital LED display, you can also connect a bar graph display or 64 separate LED. Includes an on-chip type B BCD ...
HiLetgo 2004 20X4 LCD Display LC...
HiLetgo 2004 20X4 LCD Display LCD Screen Serial with IIC I2C Adapter Yellow Green Color LCD for Arduino Raspberry Pi
$93.00 AUD
HiLetgo 2004 20X4 LCD Display LCD Screen Serial with IIC I2C Adapter Yellow Green Color LCD for Arduino Raspberry Pi Features: IIC/I2C interface was developed to reduce the IO port usage on Arduino board. Old 1602 screen requires 7 IO ports but this module uses only two. Much needed control panel IO ports can be used to add some sensors, SD ca...
6.08 Inches Monochrome 2K LCD Sc...
6.08 Inches Monochrome 2K LCD Screen for ELEGOO Mars 2/Mars 2 Pro/Voxelab Proxima Resin 3D Printers, 1620x2560 Resolution Without Touch Panel 6.08'' (with Glass)
$243.00 AUD
6.08 Inches Monochrome 2K LCD Screen for ELEGOO Mars 2/Mars 2 Pro/Voxelab Proxima Resin 3D Printers, 1620x2560 Resolution Without Touch Panel 6.08 inch Product Features
MakerFocus TFT LCD Screen Displa...
MakerFocus TFT LCD Screen Display 1.3inch TFT LCD Module, 240 * 240 IPS 65K Full Color 3.3V with SPI Interface ST7789 IC Driver, 51 STM32 Ar duino Routines for DIY
$104.00 AUD
MakerFocus TFT LCD Screen Display 1.3inch TFT LCD Module, 240 * 240 IPS 65K Full Color 3.3V with SPI Interface ST7789 IC Driver, 51 STM32 Ar duino Routines for DIY The TFT display provides a semiconductor switch for each pixel and each pixel is directly controlled by pulse. Therefore, each node is relatively independent and can be continuously c...
diymore 5 Packs Red/Green/White/...
diymore 5 Packs Red/Green/White/Yellow/Blue Colors TM1637 0.56" LED Display Digital Tube Decimal 7 Segment 4 Digit Clock Double Dots Module Serial Driver Board(5 Colors) 5 Colors
$113.00 AUD
diymore 5 Packs Red/Green/White/Yellow/Blue Colors TM1637 0.56" LED Display Digital Tube Decimal 7 Segment 4 Digit Clock Double Dots Module Serial Driver Board(5 Colors) Package Included: 5pcs x TM1637 7-Segment 4-Digit 0.56" LED Display Colon Module Clock Digital Tube Serial Driver Board (5 colors) Specification: This module is a 12 foot with c...
HiLetgo 2pcs 0.36" 4-Digit Tube ...
HiLetgo 2pcs 0.36" 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3
$83.00 AUD
HiLetgo 2pcs 0.36" 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3 Description: The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module for driver TM1637; only two signal lines can make the MCU control 4 bits 8 digital tube. Parameter: Supply vol...
HiLetgo 1.3" SPI 128x64 SSH1106 ...
HiLetgo 1.3" SPI 128x64 SSH1106 OLED LCD Display LCD Module for Arduino AVR STM32
$91.00 AUD
HiLetgo 1.3" SPI 128x64 SSH1106 OLED LCD Display LCD Module for Arduino AVR STM32 Product Features 1.3" mini OLED display screen with 128X64 resoluction and SSH1106 chipset Ultra-low power consumption: full screen lit 0.08w Four fixed bolt holes for easy installation Interface Type:SPI(Can be changed to ...
HiLetgo ILI9341 2.8" SPI TFT LCD...
HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32
$119.00 AUD
HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32 100% brand new and high qualityType: touch panelSize:2.8" SPI SerialDisplay area:36.72(W)X48.96(H)mmSize:8.5 x 4.8cmDriver element: a-Si TFT active matrixPixel arrangement: RGB vertical stripeDriver IC: ILI9341Backlight: White LEDViewing Direction: 6 o'clockColor...
6.08 Inches Mono LCD Screen for...
6.08 Inches Mono LCD Screen for Anycubic Photon Mono/Mono SE, 2K Light Curing Print Screen Replacement, with 1620x2560 Resolution (Interface Type: MIPI-4 Lane/03) Interface Type: MIPI-4 Lane/03
$283.00 AUD
6.08 Inches Mono LCD Screen for Anycubic Photon Mono/Mono SE, 2K Light Curing Print Screen Replacement, with 1620x2560 Resolution (Interface Type: MIPI-4 Lane/03) This lcd screen can use for Anycubic Photon MONO. For MONO SE you need this screen to work with the original adaptor. Shipping List: 1 X LCD Screen 1 X Tape Please note: All the brands...
DC 3.3V 1.28'' LCD Display Modul...
DC 3.3V 1.28'' LCD Display Module, RGB 240x240 GC9A01 Driver SPI Interface 240x240 Resolution for Instrument Display, Mobile Devices and Display Equipment
$127.00 AUD
DC 3.3V 1.28'' LCD Display Module, RGB 240x240 GC9A01 Driver SPI Interface 240x240 Resolution for Instrument Display, Mobile Devices and Display Equipment welcome to my store , Hope you have a pleasant shopping trip! Description: It is a 1.28 inch 240240 IPS LCD Display Screen.It uses IPS color display screen and the display effect is more vivid...
HiLetgo 2.4" SPI TFT LCD Display...
HiLetgo 2.4" SPI TFT LCD Display 2.4 Inch ILI9341 Touch Panel LCD ILI9341 240x320 5V 3.3V
$117.00 AUD
HiLetgo 2.4" SPI TFT LCD Display 2.4 Inch ILI9341 Touch Panel LCD ILI9341 240x320 5V 3.3V HiLetgo 2.4" SPI TFT LCD Display 2.4 Inch ILI9341 Touch Panel LCD ILI9341 240x320 5V 3.3V Description: Type: touch panel Size:2.4" SPI Serial Display area:36.72(W)X48.96(H)mm Driver element: a-Si TFT active matrix Pixel arrangement: RGB vertical stripe Driv...