{"id":7085993787572,"title":"3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 \/ Ender 3 Pro\/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles","handle":"3d-printer-parts-ender-3-hotend-assembled-ender-3-pro-extruder-kit-24v-40w-for-creality-ender-3-ender-3-pro-ender-3-v2-with-silicon-cover-and-0-4mm-nozzles","description":"\u003ch3\u003e3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 \/ Ender 3 Pro\/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e3D Printer Extruder Assembled Hotend for Creality Ender 3\n\/Ender 3 Pro \/Ender 3X 3D Printer Parts- 3D Printing Extruder 24V 40W for\nCreality Ender 3 \/ Ender 3 Pro \/ Ender 3X Note: The Ender 3 Extruder Head Kit\nComfortable for Creality Ender 3 \/ Ender 3 Pro \/ Ender 3X These are original\nreplacement parts for Creality 3D printer Ender 3 Pro \/Ender 3 \/Ender 3X. Tip\nof the nozzle, aluminum heating block, throat pipe (built-in Teflon) Ender 3\nExtruder Hot End Kit, white wire was temperature thermistor, Black wire was\nheating tube 24V 40W - Installation type: External thread connection -\nApplication: Creality 3D printers Ender 3 \/Ender 3 Pro \/Ender 3X - Nozzle\nsize: 0.4mm - Cable length: 1.2m - Heating Tube: 24V 40W - Operating\ntemperature range: -40~+260°C (-40~+500°F) - Material: Aluminum+Stainless\nSteel+Brass - Throat length: 52mm - Aluminum block size: approx. 20 x 20 x\n10mm HIGH QUALITY TEFLON TUBE and BRASS NOZZLE Teflon tube: PTEF, heat and\nmoisture resistance,non adhesion, wear and corrosion resistance. Thermistor\nand heating tube: High quality thermistor and heating tube are up to 260℃,with\nrapid-risen temperature, precise temperature control and good stability.\nNOZZLES and Hoses: The optimized internal structure of seamless connection\nbetween nozzle and heatbreak accelerates the extruder to dissipate heat and\nthe heatbreak to insulate heat, letting go of the nozzle blockage. Read more\nFull Metal 3D Extruder Kits Hotend 24V 40W for Creality Ender 3\/ Ender 3 Pro\n\/Ender 3X INTEGRATED SHELL OF ALL METAL FULL METAL JACKET: Sturdy and wearable\nSTABLE RUNNING: Non-blockage, non-leakage HIGH PRECISION: Heating and cooling\nsystem with high quality The frosting surface of aluminum shell anodized for\nsturdy and more wearable;integrated structure and simple circuit are\nconvenient for disassembly, repair and assembly. Read more Optimized design of\nheatbreak decreases the loss of heater block temperature by reducing heat\nconduction, and at the same time, it transfers its temperature to the\nradiator, which ensures the production stability. with flame retardant\nmaterial and good insulation, keeping heater block and nozzle clean. 3D\nprinting brass nozzle, suitable for all kinds of 3d printer, filament smoothly\nfeed in and push-out.wear-resistant with good compatibility. International\nbrass nozzle with high quality has optimized design of flow channel, smooth\nfilament path, seamless junction, less blockage problems and smooth filament-\npushing. Read more What you get Package list: 1 x Aluminum Block 1 x Heating\nTube 1 x M6x30mm Throat Pipe (Built-in Teflon) 1 x Thermistor +Brass Sleeve 1x\n1.75mm 0.4mm Brass Nozzle 5x1.75mm 0.4mm Brass Nozzle NOTE: Ender 3 extruder\nkits be used on the original creality Ender 3 \/Ender 3 Pro \/Ender 3X. If be\nused to the other 3D models, customers need to afford to the responsibility by\nthemselves, meanwhile, our after-service will not valid for this cause.Thanks\nfor your understanding. Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS \/ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.\u003c\/li\u003e\n \u003cli\u003e5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.\u003c\/li\u003e\n \u003cli\u003eENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE\u003c\/li\u003e\n \u003cli\u003eMK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W\u003c\/li\u003e\n \u003cli\u003eTIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T16:37:28+11:00","created_at":"2022-03-18T16:37:28+11:00","vendor":"RICHOOSE","type":"3D Printer Accessories","tags":["auspowers_batchone"],"price":11100,"price_min":11100,"price_max":11100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41333769863348,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07H8TSM95","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 \/ Ender 3 Pro\/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles","public_title":null,"options":["Default Title"],"price":11100,"weight":91,"compare_at_price":null,"inventory_management":null,"barcode":"Ender 3-Extruder","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07H8TSM95.jpg?v=1648552028","\/\/auspowers.com\/cdn\/shop\/products\/41saW6TWPvL.jpg?v=1647581848","\/\/auspowers.com\/cdn\/shop\/products\/41QLP9pIwuL.jpg?v=1647581848","\/\/auspowers.com\/cdn\/shop\/products\/41pAtKIWEUL.jpg?v=1647581848","\/\/auspowers.com\/cdn\/shop\/products\/41gqb3bs-6L.jpg?v=1647581848","\/\/auspowers.com\/cdn\/shop\/products\/41k1CrSQV4L.jpg?v=1647581848","\/\/auspowers.com\/cdn\/shop\/products\/61sL6I5bTkL.jpg?v=1647581848","\/\/auspowers.com\/cdn\/shop\/products\/51dyub0SLIL.jpg?v=1647581848","\/\/auspowers.com\/cdn\/shop\/products\/41u6KRoNJGL.jpg?v=1647581848"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07H8TSM95.jpg?v=1648552028","options":["Title"],"media":[{"alt":"[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 \/ Ender 3 Pro\/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles ","id":25345575846068,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07H8TSM95.jpg?v=1648552028"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07H8TSM95.jpg?v=1648552028","width":1000},{"alt":"[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 \/ Ender 3 Pro\/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles ","id":25199999320244,"position":2,"preview_image":{"aspect_ratio":0.922,"height":500,"width":461,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41saW6TWPvL.jpg?v=1647581848"},"aspect_ratio":0.922,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41saW6TWPvL.jpg?v=1647581848","width":461},{"alt":"[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 \/ Ender 3 Pro\/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles ","id":25199999353012,"position":3,"preview_image":{"aspect_ratio":0.896,"height":500,"width":448,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41QLP9pIwuL.jpg?v=1647581848"},"aspect_ratio":0.896,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41QLP9pIwuL.jpg?v=1647581848","width":448},{"alt":"[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 \/ Ender 3 Pro\/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles ","id":25199999385780,"position":4,"preview_image":{"aspect_ratio":0.832,"height":500,"width":416,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41pAtKIWEUL.jpg?v=1647581848"},"aspect_ratio":0.832,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41pAtKIWEUL.jpg?v=1647581848","width":416},{"alt":"[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 \/ Ender 3 Pro\/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles ","id":25199999418548,"position":5,"preview_image":{"aspect_ratio":0.832,"height":500,"width":416,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41gqb3bs-6L.jpg?v=1647581848"},"aspect_ratio":0.832,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41gqb3bs-6L.jpg?v=1647581848","width":416},{"alt":"[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 \/ Ender 3 Pro\/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles ","id":25199999451316,"position":6,"preview_image":{"aspect_ratio":1.597,"height":313,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41k1CrSQV4L.jpg?v=1647581848"},"aspect_ratio":1.597,"height":313,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41k1CrSQV4L.jpg?v=1647581848","width":500},{"alt":"[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 \/ Ender 3 Pro\/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles ","id":25199999484084,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61sL6I5bTkL.jpg?v=1647581848"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61sL6I5bTkL.jpg?v=1647581848","width":1000},{"alt":"[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 \/ Ender 3 Pro\/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles ","id":25199999516852,"position":8,"preview_image":{"aspect_ratio":0.832,"height":500,"width":416,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51dyub0SLIL.jpg?v=1647581848"},"aspect_ratio":0.832,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51dyub0SLIL.jpg?v=1647581848","width":416},{"alt":"[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 \/ Ender 3 Pro\/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles ","id":25199999549620,"position":9,"preview_image":{"aspect_ratio":0.832,"height":500,"width":416,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41u6KRoNJGL.jpg?v=1647581848"},"aspect_ratio":0.832,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41u6KRoNJGL.jpg?v=1647581848","width":416}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 \/ Ender 3 Pro\/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e3D Printer Extruder Assembled Hotend for Creality Ender 3\n\/Ender 3 Pro \/Ender 3X 3D Printer Parts- 3D Printing Extruder 24V 40W for\nCreality Ender 3 \/ Ender 3 Pro \/ Ender 3X Note: The Ender 3 Extruder Head Kit\nComfortable for Creality Ender 3 \/ Ender 3 Pro \/ Ender 3X These are original\nreplacement parts for Creality 3D printer Ender 3 Pro \/Ender 3 \/Ender 3X. Tip\nof the nozzle, aluminum heating block, throat pipe (built-in Teflon) Ender 3\nExtruder Hot End Kit, white wire was temperature thermistor, Black wire was\nheating tube 24V 40W - Installation type: External thread connection -\nApplication: Creality 3D printers Ender 3 \/Ender 3 Pro \/Ender 3X - Nozzle\nsize: 0.4mm - Cable length: 1.2m - Heating Tube: 24V 40W - Operating\ntemperature range: -40~+260°C (-40~+500°F) - Material: Aluminum+Stainless\nSteel+Brass - Throat length: 52mm - Aluminum block size: approx. 20 x 20 x\n10mm HIGH QUALITY TEFLON TUBE and BRASS NOZZLE Teflon tube: PTEF, heat and\nmoisture resistance,non adhesion, wear and corrosion resistance. Thermistor\nand heating tube: High quality thermistor and heating tube are up to 260℃,with\nrapid-risen temperature, precise temperature control and good stability.\nNOZZLES and Hoses: The optimized internal structure of seamless connection\nbetween nozzle and heatbreak accelerates the extruder to dissipate heat and\nthe heatbreak to insulate heat, letting go of the nozzle blockage. Read more\nFull Metal 3D Extruder Kits Hotend 24V 40W for Creality Ender 3\/ Ender 3 Pro\n\/Ender 3X INTEGRATED SHELL OF ALL METAL FULL METAL JACKET: Sturdy and wearable\nSTABLE RUNNING: Non-blockage, non-leakage HIGH PRECISION: Heating and cooling\nsystem with high quality The frosting surface of aluminum shell anodized for\nsturdy and more wearable;integrated structure and simple circuit are\nconvenient for disassembly, repair and assembly. Read more Optimized design of\nheatbreak decreases the loss of heater block temperature by reducing heat\nconduction, and at the same time, it transfers its temperature to the\nradiator, which ensures the production stability. with flame retardant\nmaterial and good insulation, keeping heater block and nozzle clean. 3D\nprinting brass nozzle, suitable for all kinds of 3d printer, filament smoothly\nfeed in and push-out.wear-resistant with good compatibility. International\nbrass nozzle with high quality has optimized design of flow channel, smooth\nfilament path, seamless junction, less blockage problems and smooth filament-\npushing. Read more What you get Package list: 1 x Aluminum Block 1 x Heating\nTube 1 x M6x30mm Throat Pipe (Built-in Teflon) 1 x Thermistor +Brass Sleeve 1x\n1.75mm 0.4mm Brass Nozzle 5x1.75mm 0.4mm Brass Nozzle NOTE: Ender 3 extruder\nkits be used on the original creality Ender 3 \/Ender 3 Pro \/Ender 3X. If be\nused to the other 3D models, customers need to afford to the responsibility by\nthemselves, meanwhile, our after-service will not valid for this cause.Thanks\nfor your understanding. Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS \/ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.\u003c\/li\u003e\n \u003cli\u003e5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.\u003c\/li\u003e\n \u003cli\u003eENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE\u003c\/li\u003e\n \u003cli\u003eMK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W\u003c\/li\u003e\n \u003cli\u003eTIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}
3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles
![[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles](http://auspowers.com/cdn/shop/products/B07H8TSM95_1400x.jpg?v=1648552028)
![[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles](http://auspowers.com/cdn/shop/products/41saW6TWPvL_1400x.jpg?v=1647581848)
![[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles](http://auspowers.com/cdn/shop/products/41QLP9pIwuL_1400x.jpg?v=1647581848)
![[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles](http://auspowers.com/cdn/shop/products/41pAtKIWEUL_1400x.jpg?v=1647581848)
![[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles](http://auspowers.com/cdn/shop/products/41gqb3bs-6L_1400x.jpg?v=1647581848)
![[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles](http://auspowers.com/cdn/shop/products/41k1CrSQV4L_1400x.jpg?v=1647581848)
![[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles](http://auspowers.com/cdn/shop/products/61sL6I5bTkL_1400x.jpg?v=1647581848)
![[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles](http://auspowers.com/cdn/shop/products/51dyub0SLIL_1400x.jpg?v=1647581848)
![[Australia - AusPower] - 3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles](http://auspowers.com/cdn/shop/products/41u6KRoNJGL_1400x.jpg?v=1647581848)
3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles
3D Printer Extruder Assembled Hotend for Creality Ender 3 /Ender 3 Pro /Ender 3X 3D Printer Parts- 3D Printing Extruder 24V 40W for Creality Ender 3 / Ender 3 Pro / Ender 3X Note: The Ender 3 Extruder Head Kit Comfortable for Creality Ender 3 / Ender 3 Pro / Ender 3X These are original replacement parts for Creality 3D printer Ender 3 Pro /Ender 3 /Ender 3X. Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon) Ender 3 Extruder Hot End Kit, white wire was temperature thermistor, Black wire was heating tube 24V 40W - Installation type: External thread connection - Application: Creality 3D printers Ender 3 /Ender 3 Pro /Ender 3X - Nozzle size: 0.4mm - Cable length: 1.2m - Heating Tube: 24V 40W - Operating temperature range: -40~+260°C (-40~+500°F) - Material: Aluminum+Stainless Steel+Brass - Throat length: 52mm - Aluminum block size: approx. 20 x 20 x 10mm HIGH QUALITY TEFLON TUBE and BRASS NOZZLE Teflon tube: PTEF, heat and moisture resistance,non adhesion, wear and corrosion resistance. Thermistor and heating tube: High quality thermistor and heating tube are up to 260℃,with rapid-risen temperature, precise temperature control and good stability. NOZZLES and Hoses: The optimized internal structure of seamless connection between nozzle and heatbreak accelerates the extruder to dissipate heat and the heatbreak to insulate heat, letting go of the nozzle blockage. Read more Full Metal 3D Extruder Kits Hotend 24V 40W for Creality Ender 3/ Ender 3 Pro /Ender 3X INTEGRATED SHELL OF ALL METAL FULL METAL JACKET: Sturdy and wearable STABLE RUNNING: Non-blockage, non-leakage HIGH PRECISION: Heating and cooling system with high quality The frosting surface of aluminum shell anodized for sturdy and more wearable;integrated structure and simple circuit are convenient for disassembly, repair and assembly. Read more Optimized design of heatbreak decreases the loss of heater block temperature by reducing heat conduction, and at the same time, it transfers its temperature to the radiator, which ensures the production stability. with flame retardant material and good insulation, keeping heater block and nozzle clean. 3D printing brass nozzle, suitable for all kinds of 3d printer, filament smoothly feed in and push-out.wear-resistant with good compatibility. International brass nozzle with high quality has optimized design of flow channel, smooth filament path, seamless junction, less blockage problems and smooth filament- pushing. Read more What you get Package list: 1 x Aluminum Block 1 x Heating Tube 1 x M6x30mm Throat Pipe (Built-in Teflon) 1 x Thermistor +Brass Sleeve 1x 1.75mm 0.4mm Brass Nozzle 5x1.75mm 0.4mm Brass Nozzle NOTE: Ender 3 extruder kits be used on the original creality Ender 3 /Ender 3 Pro /Ender 3X. If be used to the other 3D models, customers need to afford to the responsibility by themselves, meanwhile, our after-service will not valid for this cause.Thanks for your understanding. Read more
Product Features
- ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.
- 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.
- ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
- MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W
- TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)
Related Products
![[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor](http://auspowers.com/cdn/shop/products/B00PNEQUZ2_800x.jpg?v=1648523049)
STEPPERONLINE High Torque Nema 1...
$159.00 AUD
{"id":7085142573236,"title":"STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor","handle":"stepperonline-high-torque-nema-17-bipolar-stepper-motor-92oz-in-65ncm-2-1a-extruder-motor","description":"\u003ch3\u003eSTEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis is one of strongest bipolar Nema 17 stepper motor with 1.8 deg. step\nangle (200 steps\/revolution). Each phase draws 2.1A, allowing for a holding\ntorque up to 65Ncm(92oz.in). Electrical Specification: Manufacturer Part\nNumber: 17HS24-2104S Motor Type: Bipolar Stepper Step Angle: 1.8 deg. \nHolding Torque: 65Ncm(92oz.in) Rated Current\/phase: 2.1A Phase Resistance:\n1.6ohms Inductance: 3mH+\/-20%(1KHz) Physical Specification: Frame Size: 42\nx 42mm Body Length: 60mm Shaft Diameter: 5mm Shaft Length: 24mm D-cut\nLength: 15mm Number of Leads: 4 Lead Length: 500mm Weight: 500g\nConnection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the\nmotor connect to a constant current or chopper drive controller before you\ntest motor. Connecting the motor directly to a power supply will destroy the\nmotor.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e65Ncm(92oz.in) holding torque\u003c\/li\u003e\n \u003cli\u003eNEMA 17 bipolar 1.65\"x1.65\"x2.36\" 4-wire\u003c\/li\u003e\n \u003cli\u003e1.8 deg. step angle(200 steps\/rev)\u003c\/li\u003e\n \u003cli\u003eRated current 2.1A \u0026amp; resistance 1.6ohms\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-17T16:13:09+11:00","created_at":"2022-03-17T16:13:09+11:00","vendor":"STEPPERONLINE","type":"3D Printer Motors","tags":["auspowers_batchone"],"price":15900,"price_min":15900,"price_max":15900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41331628048564,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B00PNEQUZ2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor","public_title":null,"options":["Default Title"],"price":15900,"weight":535,"compare_at_price":null,"inventory_management":null,"barcode":"701056398768","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B00PNEQUZ2.jpg?v=1648523049","\/\/auspowers.com\/cdn\/shop\/products\/61UIXTJMywL.jpg?v=1647493989","\/\/auspowers.com\/cdn\/shop\/products\/51CjS_psuHL.jpg?v=1647493989","\/\/auspowers.com\/cdn\/shop\/products\/61UEpAJE4dL.jpg?v=1647493989","\/\/auspowers.com\/cdn\/shop\/products\/61bURlEKdbL.jpg?v=1647493989","\/\/auspowers.com\/cdn\/shop\/products\/41T7oFxBl9L.jpg?v=1647493989","\/\/auspowers.com\/cdn\/shop\/products\/31cKfwDcIqL_191a1f26-c1d5-4df8-b3b4-3f5916baea62.jpg?v=1647493989"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B00PNEQUZ2.jpg?v=1648523049","options":["Title"],"media":[{"alt":"[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor ","id":25341086990516,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B00PNEQUZ2.jpg?v=1648523049"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B00PNEQUZ2.jpg?v=1648523049","width":1100},{"alt":"[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor ","id":25186280079540,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61UIXTJMywL.jpg?v=1647493989"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61UIXTJMywL.jpg?v=1647493989","width":1100},{"alt":"[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor ","id":25186280112308,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51CjS_psuHL.jpg?v=1647493989"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51CjS_psuHL.jpg?v=1647493989","width":1000},{"alt":"[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor ","id":25186280145076,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61UEpAJE4dL.jpg?v=1647493989"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61UEpAJE4dL.jpg?v=1647493989","width":1100},{"alt":"[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor ","id":25186280177844,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61bURlEKdbL.jpg?v=1647493989"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61bURlEKdbL.jpg?v=1647493989","width":1000},{"alt":"[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor ","id":25186280210612,"position":6,"preview_image":{"aspect_ratio":1.926,"height":257,"width":495,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41T7oFxBl9L.jpg?v=1647493989"},"aspect_ratio":1.926,"height":257,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41T7oFxBl9L.jpg?v=1647493989","width":495},{"alt":"[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor ","id":25186280243380,"position":7,"preview_image":{"aspect_ratio":2.632,"height":190,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/31cKfwDcIqL_191a1f26-c1d5-4df8-b3b4-3f5916baea62.jpg?v=1647493989"},"aspect_ratio":2.632,"height":190,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/31cKfwDcIqL_191a1f26-c1d5-4df8-b3b4-3f5916baea62.jpg?v=1647493989","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eSTEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in\/65Ncm 2.1A Extruder Motor\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis is one of strongest bipolar Nema 17 stepper motor with 1.8 deg. step\nangle (200 steps\/revolution). Each phase draws 2.1A, allowing for a holding\ntorque up to 65Ncm(92oz.in). Electrical Specification: Manufacturer Part\nNumber: 17HS24-2104S Motor Type: Bipolar Stepper Step Angle: 1.8 deg. \nHolding Torque: 65Ncm(92oz.in) Rated Current\/phase: 2.1A Phase Resistance:\n1.6ohms Inductance: 3mH+\/-20%(1KHz) Physical Specification: Frame Size: 42\nx 42mm Body Length: 60mm Shaft Diameter: 5mm Shaft Length: 24mm D-cut\nLength: 15mm Number of Leads: 4 Lead Length: 500mm Weight: 500g\nConnection: Black(A+), Green(A-), Red(B+), Blue(B-) Warning: Make sure the\nmotor connect to a constant current or chopper drive controller before you\ntest motor. Connecting the motor directly to a power supply will destroy the\nmotor.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e65Ncm(92oz.in) holding torque\u003c\/li\u003e\n \u003cli\u003eNEMA 17 bipolar 1.65\"x1.65\"x2.36\" 4-wire\u003c\/li\u003e\n \u003cli\u003e1.8 deg. step angle(200 steps\/rev)\u003c\/li\u003e\n \u003cli\u003eRated current 2.1A \u0026amp; resistance 1.6ohms\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}
![[Australia - AusPower] - STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor](http://auspowers.com/cdn/shop/products/B00PNEQUZ2_1024x.jpg?v=1648523049)
STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor
$159.00 AUD
STEPPERONLINE High Torque Nema 17 Bipolar Stepper Motor 92oz.in/65Ncm 2.1A Extruder Motor This is one of strongest bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 2.1A, allowing for a holding torque up to 65Ncm(92oz.in). Electrical Specification: Manufacturer Part Number: 17HS24-2104S Motor Type:...
![[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M](http://auspowers.com/cdn/shop/products/B07WRBRDBZ_800x.jpg?v=1648582620)
BZ 3D GT2 Timing Belt 6mm...
$124.00 AUD
{"id":7086807384244,"title":"BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M","handle":"bz-3d-gt2-timing-belt-6mm-width-non-slip-version-for-prusa-i3-ender-3-cr-10-anet-a8-i3-mega-3d-printer-ect-10m-10m","description":"\u003ch3\u003eBZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eAfter-sales guarantee: each defective item can be replacement for free or\nrefund. If any question, please feel free to contact or QA us, BZ 3D is\ncommitted to providing you with the best service!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUpgrade Anti-slip Version: The tooth surface of the belt is made up of specially treated tooth cloth. Pulley contact with the belt, that minimizes the chance of the belt slipping.\u003c\/li\u003e\n \u003cli\u003eAccurate roundness tooth shape, ensuring accurate positioning and quiet and efficient transmission.\u003c\/li\u003e\n \u003cli\u003eNo slip, low noise, high transmission efficiency.\u003c\/li\u003e\n \u003cli\u003eHigh-strength structural design, anti-extension, make the transmission more stable.\u003c\/li\u003e\n \u003cli\u003eLength: 10m,Width: 6mm, Material: Rubber,Style:GT2 timing belt with non-slip cloth version.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-19T05:07:44+11:00","created_at":"2022-03-19T05:07:44+11:00","vendor":"BZ 3D","type":"3D Printer Accessories","tags":["auspowers_batchone"],"price":12400,"price_min":12400,"price_max":12400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41335965384884,"title":"10M","option1":"10M","option2":null,"option3":null,"sku":"B07WRBRDBZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M - 10M","public_title":"10M","options":["10M"],"price":12400,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":"141721689287","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07WRBRDBZ.jpg?v=1648582620","\/\/auspowers.com\/cdn\/shop\/products\/61v42ifhgiL.jpg?v=1647626864","\/\/auspowers.com\/cdn\/shop\/products\/71ELm3yK9JL.jpg?v=1647626864","\/\/auspowers.com\/cdn\/shop\/products\/61AXxZ4m01L.jpg?v=1647626864","\/\/auspowers.com\/cdn\/shop\/products\/610FnS-7AUL.jpg?v=1647626864","\/\/auspowers.com\/cdn\/shop\/products\/61Kf5NrFrLL.jpg?v=1647626864","\/\/auspowers.com\/cdn\/shop\/products\/61w8wuvgkwL.jpg?v=1647626864"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07WRBRDBZ.jpg?v=1648582620","options":["Style"],"media":[{"alt":"[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M ","id":25351862124724,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07WRBRDBZ.jpg?v=1648582620"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07WRBRDBZ.jpg?v=1648582620","width":1000},{"alt":"[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M ","id":25207313072308,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61v42ifhgiL.jpg?v=1647626864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61v42ifhgiL.jpg?v=1647626864","width":1000},{"alt":"[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M ","id":25207313105076,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71ELm3yK9JL.jpg?v=1647626864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71ELm3yK9JL.jpg?v=1647626864","width":1000},{"alt":"[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M ","id":25207313137844,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61AXxZ4m01L.jpg?v=1647626864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61AXxZ4m01L.jpg?v=1647626864","width":1000},{"alt":"[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M ","id":25207313170612,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/610FnS-7AUL.jpg?v=1647626864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/610FnS-7AUL.jpg?v=1647626864","width":1000},{"alt":"[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M ","id":25207313203380,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Kf5NrFrLL.jpg?v=1647626864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Kf5NrFrLL.jpg?v=1647626864","width":1000},{"alt":"[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M ","id":25207313236148,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61w8wuvgkwL.jpg?v=1647626864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61w8wuvgkwL.jpg?v=1647626864","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eBZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eAfter-sales guarantee: each defective item can be replacement for free or\nrefund. If any question, please feel free to contact or QA us, BZ 3D is\ncommitted to providing you with the best service!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eUpgrade Anti-slip Version: The tooth surface of the belt is made up of specially treated tooth cloth. Pulley contact with the belt, that minimizes the chance of the belt slipping.\u003c\/li\u003e\n \u003cli\u003eAccurate roundness tooth shape, ensuring accurate positioning and quiet and efficient transmission.\u003c\/li\u003e\n \u003cli\u003eNo slip, low noise, high transmission efficiency.\u003c\/li\u003e\n \u003cli\u003eHigh-strength structural design, anti-extension, make the transmission more stable.\u003c\/li\u003e\n \u003cli\u003eLength: 10m,Width: 6mm, Material: Rubber,Style:GT2 timing belt with non-slip cloth version.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}
![[Australia - AusPower] - BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M](http://auspowers.com/cdn/shop/products/B07WRBRDBZ_1024x.jpg?v=1648582620)
BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) 10M
$124.00 AUD
BZ 3D GT2 Timing Belt 6mm Width Non-Slip Version,for Prusa i3, Ender 3, CR-10, Anet A8, i3 Mega 3D Printer ect (10M) After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, BZ 3D is committed to providing you with the best service! Product Features Upg...
![[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4](http://auspowers.com/cdn/shop/products/B07W486RGM_800x.jpg?v=1648555547)
Usongshine 12 Pieces 3D Printer ...
$74.00 AUD
{"id":7086069973172,"title":"Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4","handle":"usongshine-12-pieces-3d-printer-nozzles-mk8-nozzle-0-4mm-for-3d-printer-makerbot-creality-cr-10-mk8-12-pcs-0-4","description":"\u003ch3\u003eUsongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eUsongshine 3D printer nozzles MK8 extruder nozzles\nPerfectly circular and with thread size. The extrusion holes are centered and\nconcentric, the bore is smooth, and the threads are clean, connect with M6\nfrom the thread, easy to install, fits the parts exactly. Read more Precise\nsize The 3D printer nozzle through long-term tests to largely solve the\nproblem of clogging and lack of materials, low thermal conductivity, corrosion\nresistance, high abrasion resistance. Consistency standard opening size The\ncleaning needle slides down the nozzle, the nozzle hole has a standard size\nand is easily screwed into the heating block. Applicability and compatibility\nWith the robust and high quality brass material, compatible with all 1.75 mm\nPLA ABS 3D printers. The 3D printer nozzle for more than hours of printing at\n100% flow. Tailor-made for your 3D printer Provide nozzles of various sizes\naround the nozzles for different speed \/ precision combinations to find your\nideal fit. Read more Premium quality Applicability and compatibility Precise\ndesign Read more Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePremium Quality: MK8 nozzles are made of high quality brass material. They are robust and offer a long service life. Easy to install and change. Input diameter 1.75 mm; Screw thread: M6; Hexagon diameter: 6 mm.\u003c\/li\u003e\n \u003cli\u003ePrecise design: 3D printer nozzles can effectively prevent the print head from leaking and produce consistent prints with smooth and glossy varnish. Reduce the resistance at the corners and avoid blocking the filament with a rounded chamfer nozzle.\u003c\/li\u003e\n \u003cli\u003eApplicability and compatibility: MK8 extruder nozzles fit for 3D printer Makerbot Creality CR-10, MK8-Makerbot Reprap Prusa I3, almost compatible with all 1.75 mm PLA ABS 3D printers. Fits exactly like the original.\u003c\/li\u003e\n \u003cli\u003eScope of delivery: The printer nozzles come with 12 0.4mm MK8 nozzles with 5 nozzle cleaning needles.\u003c\/li\u003e\n \u003cli\u003eHigh quality: Usongshine is a company specializing in 3D printers and 3D accessories. All products are subject to strict quality controls before they leave the factory.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:15:19+11:00","created_at":"2022-03-18T18:15:19+11:00","vendor":"Usongshine","type":"3D Printer Extruders","tags":["auspowers_batchone"],"price":7400,"price_min":7400,"price_max":7400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334016606388,"title":"MK8 12 pcs 0.4","option1":"MK8 12 pcs 0.4","option2":null,"option3":null,"sku":"B07W486RGM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 - MK8 12 pcs 0.4","public_title":"MK8 12 pcs 0.4","options":["MK8 12 pcs 0.4"],"price":7400,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":"200000087","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07W486RGM.jpg?v=1648555547","\/\/auspowers.com\/cdn\/shop\/products\/61doJBu_f_L.jpg?v=1647587719","\/\/auspowers.com\/cdn\/shop\/products\/61DcYikTvRL.jpg?v=1647587719","\/\/auspowers.com\/cdn\/shop\/products\/71hF85he7tL.jpg?v=1647587719","\/\/auspowers.com\/cdn\/shop\/products\/71HFaxnzGWL.jpg?v=1647587719","\/\/auspowers.com\/cdn\/shop\/products\/71AUAT11m9L.jpg?v=1647587719","\/\/auspowers.com\/cdn\/shop\/products\/61JGooyhXKL.jpg?v=1647587719"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07W486RGM.jpg?v=1648555547","options":["Color"],"media":[{"alt":"[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 ","id":25346222358708,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07W486RGM.jpg?v=1648555547"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07W486RGM.jpg?v=1648555547","width":1500},{"alt":"[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 ","id":25201031610548,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61doJBu_f_L.jpg?v=1647587719"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61doJBu_f_L.jpg?v=1647587719","width":1500},{"alt":"[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 ","id":25201031643316,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61DcYikTvRL.jpg?v=1647587719"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61DcYikTvRL.jpg?v=1647587719","width":1500},{"alt":"[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 ","id":25201031676084,"position":4,"preview_image":{"aspect_ratio":0.999,"height":1500,"width":1499,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71hF85he7tL.jpg?v=1647587719"},"aspect_ratio":0.999,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71hF85he7tL.jpg?v=1647587719","width":1499},{"alt":"[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 ","id":25201031708852,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71HFaxnzGWL.jpg?v=1647587719"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71HFaxnzGWL.jpg?v=1647587719","width":1500},{"alt":"[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 ","id":25201031741620,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71AUAT11m9L.jpg?v=1647587719"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71AUAT11m9L.jpg?v=1647587719","width":1500},{"alt":"[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4 ","id":25201031774388,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61JGooyhXKL.jpg?v=1647587719"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61JGooyhXKL.jpg?v=1647587719","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eUsongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eUsongshine 3D printer nozzles MK8 extruder nozzles\nPerfectly circular and with thread size. The extrusion holes are centered and\nconcentric, the bore is smooth, and the threads are clean, connect with M6\nfrom the thread, easy to install, fits the parts exactly. Read more Precise\nsize The 3D printer nozzle through long-term tests to largely solve the\nproblem of clogging and lack of materials, low thermal conductivity, corrosion\nresistance, high abrasion resistance. Consistency standard opening size The\ncleaning needle slides down the nozzle, the nozzle hole has a standard size\nand is easily screwed into the heating block. Applicability and compatibility\nWith the robust and high quality brass material, compatible with all 1.75 mm\nPLA ABS 3D printers. The 3D printer nozzle for more than hours of printing at\n100% flow. Tailor-made for your 3D printer Provide nozzles of various sizes\naround the nozzles for different speed \/ precision combinations to find your\nideal fit. Read more Premium quality Applicability and compatibility Precise\ndesign Read more Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePremium Quality: MK8 nozzles are made of high quality brass material. They are robust and offer a long service life. Easy to install and change. Input diameter 1.75 mm; Screw thread: M6; Hexagon diameter: 6 mm.\u003c\/li\u003e\n \u003cli\u003ePrecise design: 3D printer nozzles can effectively prevent the print head from leaking and produce consistent prints with smooth and glossy varnish. Reduce the resistance at the corners and avoid blocking the filament with a rounded chamfer nozzle.\u003c\/li\u003e\n \u003cli\u003eApplicability and compatibility: MK8 extruder nozzles fit for 3D printer Makerbot Creality CR-10, MK8-Makerbot Reprap Prusa I3, almost compatible with all 1.75 mm PLA ABS 3D printers. Fits exactly like the original.\u003c\/li\u003e\n \u003cli\u003eScope of delivery: The printer nozzles come with 12 0.4mm MK8 nozzles with 5 nozzle cleaning needles.\u003c\/li\u003e\n \u003cli\u003eHigh quality: Usongshine is a company specializing in 3D printers and 3D accessories. All products are subject to strict quality controls before they leave the factory.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}
![[Australia - AusPower] - Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4](http://auspowers.com/cdn/shop/products/B07W486RGM_1024x.jpg?v=1648555547)
Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 MK8 12 pcs 0.4
$74.00 AUD
Usongshine 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm for 3D Printer Makerbot Creality CR-10 Usongshine 3D printer nozzles MK8 extruder nozzles Perfectly circular and with thread size. The extrusion holes are centered and concentric, the bore is smooth, and the threads are clean, connect with M6 from the thread, easy to install, fits the part...
![[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560](http://auspowers.com/cdn/shop/products/B07ZNFMCSR_800x.jpg?v=1648555514)
Treedix RAMPS 1.4 Control Panel ...
$88.00 AUD
{"id":7086069416116,"title":"Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560","handle":"treedix-ramps-1-4-control-panel-3d-printer-control-board-reprap-control-board-ramps-1-4-mega-shield-compatible-with-arduino-mega-2560","description":"\u003ch3\u003eTreedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRepRap Mega Pololu Shield, or RAMPS for short. It is designed to fit the\nentire electronics needed for a RepRap in one small package for low cost.\nRAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and\nhas plenty room for expansion. The modular design includes plug in stepper\ndrivers and extruder control electronics on an Arduino MEGA shield for easy\nservice, part replacement, upgrade-ability and expansion. Additionally, a\nnumber of Arduino expansion boards can be added to the system as long as the\nmain RAMPS board is kept to the top of the stack. Specification: Material:\nMetal Size: about 1063cm\/3.942.361.18in Weight: about 71g\/2.5oz Package\nIncluded： 1 Pcs RAMPS 1.4 Control Panel 3D Printer Control Board Reprap\nControl Board\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eRAMPS 1.4 Control Panel is used as driving shield for 3D printers, and it's easy to stack it onto the MEGA 2560 control board.\u003c\/li\u003e\n \u003cli\u003eAssembly and testing without welding.\u003c\/li\u003e\n \u003cli\u003eArduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack\u003c\/li\u003e\n \u003cli\u003eSuitable for 5 Pololu stepper drive boards.\u003c\/li\u003e\n \u003cli\u003e100% brand new and high quality.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:14:12+11:00","created_at":"2022-03-18T18:14:12+11:00","vendor":"Treedix","type":"3D Printer Controllers","tags":["auspowers_batchone"],"price":8800,"price_min":8800,"price_max":8800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334015688884,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07ZNFMCSR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560","public_title":null,"options":["Default Title"],"price":8800,"weight":116,"compare_at_price":null,"inventory_management":null,"barcode":"0765756502702","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07ZNFMCSR.jpg?v=1648555514","\/\/auspowers.com\/cdn\/shop\/products\/511tCdk_jNL.jpg?v=1647587653","\/\/auspowers.com\/cdn\/shop\/products\/51Y3AvQzhgL.jpg?v=1647587653","\/\/auspowers.com\/cdn\/shop\/products\/51ljs7Y3V7L.jpg?v=1647587653","\/\/auspowers.com\/cdn\/shop\/products\/51rSSpWifgL.jpg?v=1647587653","\/\/auspowers.com\/cdn\/shop\/products\/61Zb6yVhb2L.jpg?v=1647587653","\/\/auspowers.com\/cdn\/shop\/products\/51CY7M0bJmL.jpg?v=1647587653"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07ZNFMCSR.jpg?v=1648555514","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 ","id":25346215608500,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07ZNFMCSR.jpg?v=1648555514"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07ZNFMCSR.jpg?v=1648555514","width":1001},{"alt":"[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 ","id":25201018339508,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/511tCdk_jNL.jpg?v=1647587653"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/511tCdk_jNL.jpg?v=1647587653","width":500},{"alt":"[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 ","id":25201018372276,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51Y3AvQzhgL.jpg?v=1647587653"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51Y3AvQzhgL.jpg?v=1647587653","width":500},{"alt":"[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 ","id":25201018405044,"position":4,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51ljs7Y3V7L.jpg?v=1647587653"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51ljs7Y3V7L.jpg?v=1647587653","width":500},{"alt":"[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 ","id":25201018437812,"position":5,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51rSSpWifgL.jpg?v=1647587653"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51rSSpWifgL.jpg?v=1647587653","width":500},{"alt":"[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 ","id":25201018470580,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Zb6yVhb2L.jpg?v=1647587653"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Zb6yVhb2L.jpg?v=1647587653","width":1000},{"alt":"[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 ","id":25201018503348,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/51CY7M0bJmL.jpg?v=1647587653"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/51CY7M0bJmL.jpg?v=1647587653","width":1001}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTreedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eRepRap Mega Pololu Shield, or RAMPS for short. It is designed to fit the\nentire electronics needed for a RepRap in one small package for low cost.\nRAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and\nhas plenty room for expansion. The modular design includes plug in stepper\ndrivers and extruder control electronics on an Arduino MEGA shield for easy\nservice, part replacement, upgrade-ability and expansion. Additionally, a\nnumber of Arduino expansion boards can be added to the system as long as the\nmain RAMPS board is kept to the top of the stack. Specification: Material:\nMetal Size: about 1063cm\/3.942.361.18in Weight: about 71g\/2.5oz Package\nIncluded： 1 Pcs RAMPS 1.4 Control Panel 3D Printer Control Board Reprap\nControl Board\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eRAMPS 1.4 Control Panel is used as driving shield for 3D printers, and it's easy to stack it onto the MEGA 2560 control board.\u003c\/li\u003e\n \u003cli\u003eAssembly and testing without welding.\u003c\/li\u003e\n \u003cli\u003eArduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack\u003c\/li\u003e\n \u003cli\u003eSuitable for 5 Pololu stepper drive boards.\u003c\/li\u003e\n \u003cli\u003e100% brand new and high quality.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}
![[Australia - AusPower] - Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560](http://auspowers.com/cdn/shop/products/B07ZNFMCSR_1024x.jpg?v=1648555514)
Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560
$88.00 AUD
Treedix RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board RAMPS 1.4 Mega Shield Compatible with Arduino Mega 2560 RepRap Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA pl...
![[Australia - AusPower] - 3D Printing Build Surface, 8.66" x 8.66" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm](http://auspowers.com/cdn/shop/products/B07GTJB7BV_800x.jpg?v=1648555485)
3D Printing Build Surface, 8.66"...
$124.00 AUD
{"id":7086069055668,"title":"3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm","handle":"3d-printing-build-surface-8-66-x-8-66-220x220mm-flexible-magnetic-build-platform-for-3d-printer-220x220mm","description":"\u003ch3\u003e3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Color: blue Size: 8.66\" x 8.66\" (220x220mm) Working\ntemperature: can heat less than 80 ℃ Precautions: 1、Heating the platform not\nhigher than 80℃ to make sure the magnetic works 2、Adjust the panel to find a\nbetter direction of magnetism 3、Due to the thickness of the sticker, please\nadjust the height of your Z axis(High temperature of the nozzle will damage\nthe sticker) 4、Compatible with PLA,WOOD,CARBON FIBER,TPU Package includes: 1 x\nA Magnetic Hot Bed Sticker 1 x B Magnetic Hot Bed Sticker\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe magnetic build platform comes in two parts: Part A top side is a matte surface; Part B with adhesive that can stick on your original bed.\u003c\/li\u003e\n \u003cli\u003eRemoving 3D printed parts easy: The magnetic build platform allows you to remove your printed parts in a few seconds from a build plate.\u003c\/li\u003e\n \u003cli\u003eWorking Temperature: can heat less than 80 C. If not it will affects the stability of the working seriously.\u003c\/li\u003e\n \u003cli\u003eCompatible with PLA, wood, PCL and TPU Flexible filaments (sold separately)\u003c\/li\u003e\n \u003cli\u003eSize: 8.66\" x 8.66\" (220x220mm)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:13:32+11:00","created_at":"2022-03-18T18:13:32+11:00","vendor":"HWA KUNG","type":"3D Printer Platforms","tags":["auspowers_batchone"],"price":12400,"price_min":12400,"price_max":12400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334015000756,"title":"220x220mm","option1":"220x220mm","option2":null,"option3":null,"sku":"B07GTJB7BV","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm - 220x220mm","public_title":"220x220mm","options":["220x220mm"],"price":12400,"weight":272,"compare_at_price":null,"inventory_management":null,"barcode":"HK-07","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07GTJB7BV.jpg?v=1648555485","\/\/auspowers.com\/cdn\/shop\/products\/61z9Ftg1U5L.jpg?v=1647587612","\/\/auspowers.com\/cdn\/shop\/products\/61hqOs1N7_L.jpg?v=1647587612","\/\/auspowers.com\/cdn\/shop\/products\/61GNt0EKlfL.jpg?v=1647587612","\/\/auspowers.com\/cdn\/shop\/products\/61p-pJKpEgL.jpg?v=1647587612","\/\/auspowers.com\/cdn\/shop\/products\/61IAjDNIy-L.jpg?v=1647587612"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07GTJB7BV.jpg?v=1648555485","options":["Size"],"media":[{"alt":"[Australia - AusPower] - 3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm ","id":25346209972404,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07GTJB7BV.jpg?v=1648555485"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07GTJB7BV.jpg?v=1648555485","width":1000},{"alt":"[Australia - AusPower] - 3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm ","id":25201012342964,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61z9Ftg1U5L.jpg?v=1647587612"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61z9Ftg1U5L.jpg?v=1647587612","width":1000},{"alt":"[Australia - AusPower] - 3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm ","id":25201012375732,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61hqOs1N7_L.jpg?v=1647587612"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61hqOs1N7_L.jpg?v=1647587612","width":1000},{"alt":"[Australia - AusPower] - 3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm ","id":25201012408500,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61GNt0EKlfL.jpg?v=1647587612"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61GNt0EKlfL.jpg?v=1647587612","width":1000},{"alt":"[Australia - AusPower] - 3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm ","id":25201012441268,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61p-pJKpEgL.jpg?v=1647587612"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61p-pJKpEgL.jpg?v=1647587612","width":1000},{"alt":"[Australia - AusPower] - 3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm ","id":25201012474036,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61IAjDNIy-L.jpg?v=1647587612"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61IAjDNIy-L.jpg?v=1647587612","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e3D Printing Build Surface, 8.66\" x 8.66\" (220x220mm) Flexible Magnetic Build Platform for 3D Printer\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Color: blue Size: 8.66\" x 8.66\" (220x220mm) Working\ntemperature: can heat less than 80 ℃ Precautions: 1、Heating the platform not\nhigher than 80℃ to make sure the magnetic works 2、Adjust the panel to find a\nbetter direction of magnetism 3、Due to the thickness of the sticker, please\nadjust the height of your Z axis(High temperature of the nozzle will damage\nthe sticker) 4、Compatible with PLA,WOOD,CARBON FIBER,TPU Package includes: 1 x\nA Magnetic Hot Bed Sticker 1 x B Magnetic Hot Bed Sticker\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eThe magnetic build platform comes in two parts: Part A top side is a matte surface; Part B with adhesive that can stick on your original bed.\u003c\/li\u003e\n \u003cli\u003eRemoving 3D printed parts easy: The magnetic build platform allows you to remove your printed parts in a few seconds from a build plate.\u003c\/li\u003e\n \u003cli\u003eWorking Temperature: can heat less than 80 C. If not it will affects the stability of the working seriously.\u003c\/li\u003e\n \u003cli\u003eCompatible with PLA, wood, PCL and TPU Flexible filaments (sold separately)\u003c\/li\u003e\n \u003cli\u003eSize: 8.66\" x 8.66\" (220x220mm)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}
![[Australia - AusPower] - 3D Printing Build Surface, 8.66" x 8.66" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm](http://auspowers.com/cdn/shop/products/B07GTJB7BV_1024x.jpg?v=1648555485)
3D Printing Build Surface, 8.66" x 8.66" (220x220mm) Flexible Magnetic Build Platform for 3D Printer 220x220mm
$124.00 AUD
3D Printing Build Surface, 8.66" x 8.66" (220x220mm) Flexible Magnetic Build Platform for 3D Printer Specification: Color: blue Size: 8.66" x 8.66" (220x220mm) Working temperature: can heat less than 80 ℃ Precautions: 1、Heating the platform not higher than 80℃ to make sure the magnetic works 2、Adjust the panel to find a better direction of magne...
![[Australia - AusPower] - iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1](http://auspowers.com/cdn/shop/products/B09FZ44KH7_800x.jpg?v=1648555481)
iMetrx (1PCS)42×23MM Nema 17 Ste...
$124.00 AUD
{"id":7086068990132,"title":"iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1","handle":"imetrx-1pcs42-23mm-nema-17-stepper-motor-4-lead-0-7a-high-torque-200mn-m-motor-with-1m-cable-for-diy-cnc-3d-printer-42-23-1","description":"\u003ch3\u003eiMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eExcellent performance: stepper motor, high torque, performance is 15% -25% higher than conventional motors. We upgraded the circuit board inside the bipolar motor to ensure the stability of the motor structure and achieve the ideal uniform rotation.\u003c\/li\u003e\n \u003cli\u003eLow NoiseThe stepper motor is made of sturdy and durable metal. The perfect combination of rubber and rotor makes the inner structure more stable. This can reduce the vibrations and noise that occur when the engine is running.\u003c\/li\u003e\n \u003cli\u003eLow ResistanceCompared to engines of the same thickness and the same torque, the resistance value of the stepper motor is lower, effectively reducing the heat generation of the motor.\u003c\/li\u003e\n \u003cli\u003eQuality service: iMetrx is a brand specialising in the development and production of 3D printer parts. Each stepper motor nema 17 has been subjected to strict quality control before leaving the factory. If you have quality problems, please contact us in time!\u003c\/li\u003e\n \u003cli\u003ePackage includes: 1PCS motor + extension cable\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:13:27+11:00","created_at":"2022-03-18T18:13:27+11:00","vendor":"iMetrx","type":"3D Printer Motors","tags":["auspowers_batchone"],"price":12400,"price_min":12400,"price_max":12400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334014869684,"title":"1 \/ 42*23","option1":"1","option2":"42*23","option3":null,"sku":"B09FZ44KH7","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1 - 1 \/ 42*23","public_title":"1 \/ 42*23","options":["1","42*23"],"price":12400,"weight":200,"compare_at_price":null,"inventory_management":null,"barcode":"US4223","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B09FZ44KH7.jpg?v=1648555481","\/\/auspowers.com\/cdn\/shop\/products\/61XTcqXDPGL_c4537ea9-3683-4bbf-81ba-8c6e1693266a.jpg?v=1647587608","\/\/auspowers.com\/cdn\/shop\/products\/61GSLH35UXL_367033a9-1459-4a86-a67e-4d8587201537.jpg?v=1647587608","\/\/auspowers.com\/cdn\/shop\/products\/61jPcE2YpRS.jpg?v=1647587608","\/\/auspowers.com\/cdn\/shop\/products\/71PCWEmmr1L_be35629b-f5c5-4bb9-8552-8db6f421aa52.jpg?v=1647587608","\/\/auspowers.com\/cdn\/shop\/products\/61lGyUow_JL_447dc70b-11f5-42fe-a114-b0d94d38f0f0.jpg?v=1647587608"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B09FZ44KH7.jpg?v=1648555481","options":["Number of Items","Size"],"media":[{"alt":"[Australia - AusPower] - iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1 ","id":25346209349812,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B09FZ44KH7.jpg?v=1648555481"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B09FZ44KH7.jpg?v=1648555481","width":1500},{"alt":"[Australia - AusPower] - iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1 ","id":25201011261620,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61XTcqXDPGL_c4537ea9-3683-4bbf-81ba-8c6e1693266a.jpg?v=1647587608"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61XTcqXDPGL_c4537ea9-3683-4bbf-81ba-8c6e1693266a.jpg?v=1647587608","width":1500},{"alt":"[Australia - AusPower] - iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1 ","id":25201011294388,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61GSLH35UXL_367033a9-1459-4a86-a67e-4d8587201537.jpg?v=1647587608"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61GSLH35UXL_367033a9-1459-4a86-a67e-4d8587201537.jpg?v=1647587608","width":1500},{"alt":"[Australia - AusPower] - iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1 ","id":25201011327156,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61jPcE2YpRS.jpg?v=1647587608"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61jPcE2YpRS.jpg?v=1647587608","width":1500},{"alt":"[Australia - AusPower] - iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1 ","id":25201011359924,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71PCWEmmr1L_be35629b-f5c5-4bb9-8552-8db6f421aa52.jpg?v=1647587608"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71PCWEmmr1L_be35629b-f5c5-4bb9-8552-8db6f421aa52.jpg?v=1647587608","width":1500},{"alt":"[Australia - AusPower] - iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1 ","id":25201011392692,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61lGyUow_JL_447dc70b-11f5-42fe-a114-b0d94d38f0f0.jpg?v=1647587608"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61lGyUow_JL_447dc70b-11f5-42fe-a114-b0d94d38f0f0.jpg?v=1647587608","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eiMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eExcellent performance: stepper motor, high torque, performance is 15% -25% higher than conventional motors. We upgraded the circuit board inside the bipolar motor to ensure the stability of the motor structure and achieve the ideal uniform rotation.\u003c\/li\u003e\n \u003cli\u003eLow NoiseThe stepper motor is made of sturdy and durable metal. The perfect combination of rubber and rotor makes the inner structure more stable. This can reduce the vibrations and noise that occur when the engine is running.\u003c\/li\u003e\n \u003cli\u003eLow ResistanceCompared to engines of the same thickness and the same torque, the resistance value of the stepper motor is lower, effectively reducing the heat generation of the motor.\u003c\/li\u003e\n \u003cli\u003eQuality service: iMetrx is a brand specialising in the development and production of 3D printer parts. Each stepper motor nema 17 has been subjected to strict quality control before leaving the factory. If you have quality problems, please contact us in time!\u003c\/li\u003e\n \u003cli\u003ePackage includes: 1PCS motor + extension cable\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}
![[Australia - AusPower] - iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1](http://auspowers.com/cdn/shop/products/B09FZ44KH7_1024x.jpg?v=1648555481)
iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer 42*23 1
$124.00 AUD
iMetrx (1PCS)42×23MM Nema 17 Stepper Motor,4 Lead 0.7A high Torque(＞200mN.m) Motor with 1M Cable for DIY CNC 3D Printer Product Features Excellent performance: stepper motor, high torque, performance is 15% -25% higher than conventional motors. We upgraded the circuit board inside the bipolar motor to ensure the stability of the m...
![[Australia - AusPower] - Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)](http://auspowers.com/cdn/shop/products/B09G4KJWRH_800x.jpg?v=1648555459)
Teyleten Robot New TL-Smoother V...
$84.00 AUD
{"id":7086068596916,"title":"Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)","handle":"teyleten-robot-new-tl-smoother-v1-0-addon-module-for-3d-pinter-motor-drivers-controller-5pcs","description":"\u003ch3\u003eTeyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Name: Stepper Motor Driver Filter TL Smoother Filter\nSize:4x3cm\/1.57x1.18in Material:ABS+Metal Weight:40g\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant.\u003c\/li\u003e\n \u003cli\u003eLower vibration lower noise smoother result.\u003c\/li\u003e\n \u003cli\u003eEffectively solve the heat dissipation during the use of the module, reduce the hot conditions, and increase the life of the module.\u003c\/li\u003e\n \u003cli\u003eAlso protected against inductance voltages in the unpowered state of the driver.\u003c\/li\u003e\n \u003cli\u003eEliminate vibration stripes effectively, especially on A4988 DRV8825 etc stepper motor driver we have tested.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:12:37+11:00","created_at":"2022-03-18T18:12:37+11:00","vendor":"Teyleten Robot","type":"3D Printer Interface \u0026 Driver Modules","tags":["auspowers_batchone"],"price":8400,"price_min":8400,"price_max":8400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334014050484,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B09G4KJWRH","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)","public_title":null,"options":["Default Title"],"price":8400,"weight":41,"compare_at_price":null,"inventory_management":null,"barcode":"0768432146757","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B09G4KJWRH.jpg?v=1648555459","\/\/auspowers.com\/cdn\/shop\/products\/71oDFIrwotL.jpg?v=1647587557","\/\/auspowers.com\/cdn\/shop\/products\/61BjDjbGopL.jpg?v=1647587557","\/\/auspowers.com\/cdn\/shop\/products\/61nqZ93A32L.jpg?v=1647587557","\/\/auspowers.com\/cdn\/shop\/products\/81Xpx6xD9kL.jpg?v=1647587557"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B09G4KJWRH.jpg?v=1648555459","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS) ","id":25346203353268,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B09G4KJWRH.jpg?v=1648555459"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B09G4KJWRH.jpg?v=1648555459","width":2560},{"alt":"[Australia - AusPower] - Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS) ","id":25201006608564,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71oDFIrwotL.jpg?v=1647587557"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71oDFIrwotL.jpg?v=1647587557","width":2560},{"alt":"[Australia - AusPower] - Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS) ","id":25201006641332,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1956,"width":1956,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61BjDjbGopL.jpg?v=1647587557"},"aspect_ratio":1.0,"height":1956,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61BjDjbGopL.jpg?v=1647587557","width":1956},{"alt":"[Australia - AusPower] - Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS) ","id":25201006674100,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2264,"width":2264,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61nqZ93A32L.jpg?v=1647587557"},"aspect_ratio":1.0,"height":2264,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61nqZ93A32L.jpg?v=1647587557","width":2264},{"alt":"[Australia - AusPower] - Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS) ","id":25201006706868,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81Xpx6xD9kL.jpg?v=1647587557"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81Xpx6xD9kL.jpg?v=1647587557","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eTeyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Name: Stepper Motor Driver Filter TL Smoother Filter\nSize:4x3cm\/1.57x1.18in Material:ABS+Metal Weight:40g\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant.\u003c\/li\u003e\n \u003cli\u003eLower vibration lower noise smoother result.\u003c\/li\u003e\n \u003cli\u003eEffectively solve the heat dissipation during the use of the module, reduce the hot conditions, and increase the life of the module.\u003c\/li\u003e\n \u003cli\u003eAlso protected against inductance voltages in the unpowered state of the driver.\u003c\/li\u003e\n \u003cli\u003eEliminate vibration stripes effectively, especially on A4988 DRV8825 etc stepper motor driver we have tested.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}
![[Australia - AusPower] - Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)](http://auspowers.com/cdn/shop/products/B09G4KJWRH_1024x.jpg?v=1648555459)
Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS)
$84.00 AUD
Teyleten Robot New TL-Smoother V1.0 Addon Module for 3D pinter Motor Drivers Controller (5PCS) Specification: Name: Stepper Motor Driver Filter TL Smoother Filter Size:4x3cm/1.57x1.18in Material:ABS+Metal Weight:40g Product Features TL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especia...
![[Australia - AusPower] - BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed](http://auspowers.com/cdn/shop/products/B089F9S9V1_800x.jpg?v=1648555448)
BALITENSEN 260mm x 260mm x 3mm...
$180.00 AUD
{"id":7086068334772,"title":"BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed","handle":"balitensen-260mm-x-260mm-x-3mm-thick-borosilicate-glass-plate-for-3d-printers-glass-bed","description":"\u003ch3\u003eBALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eBALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printer\nBuild Surface Specifications: Material: Boro Glass Size: 260x260x 3mm Length\ntolerance: +\/-1mm Package content: 260 x 260 x 3mm Borosilicate Glass x 1\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e100% borosilicate glass\u003c\/li\u003e\n \u003cli\u003ePolished edges to improve handling safety\u003c\/li\u003e\n \u003cli\u003eDimensions: 260x260x3mm\u003c\/li\u003e\n \u003cli\u003eCompatiable with Flyingbear P905X, Flsun Cube, A20m 3D Printers\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:12:10+11:00","created_at":"2022-03-18T18:12:10+11:00","vendor":"BALITENSEN","type":"3D Printer Platforms","tags":["auspowers_batchone"],"price":18000,"price_min":18000,"price_max":18000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334013657268,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B089F9S9V1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed","public_title":null,"options":["Default Title"],"price":18000,"weight":689,"compare_at_price":null,"inventory_management":null,"barcode":"BG260x260x3","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B089F9S9V1.jpg?v=1648555448","\/\/auspowers.com\/cdn\/shop\/products\/41VVPApLNnL.jpg?v=1647587530","\/\/auspowers.com\/cdn\/shop\/products\/311FnjnlIVS.jpg?v=1647587530","\/\/auspowers.com\/cdn\/shop\/products\/31nCvbXDciS.jpg?v=1647587530"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B089F9S9V1.jpg?v=1648555448","options":["Title"],"media":[{"alt":"[Australia - AusPower] - BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed ","id":25346200502452,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B089F9S9V1.jpg?v=1648555448"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B089F9S9V1.jpg?v=1648555448","width":1500},{"alt":"[Australia - AusPower] - BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed ","id":25201003528372,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/41VVPApLNnL.jpg?v=1647587530"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/41VVPApLNnL.jpg?v=1647587530","width":1000},{"alt":"[Australia - AusPower] - BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed ","id":25201003561140,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/311FnjnlIVS.jpg?v=1647587530"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/311FnjnlIVS.jpg?v=1647587530","width":1000},{"alt":"[Australia - AusPower] - BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed ","id":25201003593908,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1001,"width":1001,"src":"\/\/auspowers.com\/cdn\/shop\/products\/31nCvbXDciS.jpg?v=1647587530"},"aspect_ratio":1.0,"height":1001,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/31nCvbXDciS.jpg?v=1647587530","width":1001}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eBALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eBALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printer\nBuild Surface Specifications: Material: Boro Glass Size: 260x260x 3mm Length\ntolerance: +\/-1mm Package content: 260 x 260 x 3mm Borosilicate Glass x 1\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003e100% borosilicate glass\u003c\/li\u003e\n \u003cli\u003ePolished edges to improve handling safety\u003c\/li\u003e\n \u003cli\u003eDimensions: 260x260x3mm\u003c\/li\u003e\n \u003cli\u003eCompatiable with Flyingbear P905X, Flsun Cube, A20m 3D Printers\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}
![[Australia - AusPower] - BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed](http://auspowers.com/cdn/shop/products/B089F9S9V1_1024x.jpg?v=1648555448)
BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed
$180.00 AUD
BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printers Glass Bed BALITENSEN 260mm x 260mm x 3mm Thick Borosilicate Glass Plate for 3D Printer Build Surface Specifications: Material: Boro Glass Size: 260x260x 3mm Length tolerance: +/-1mm Package content: 260 x 260 x 3mm Borosilicate Glass x 1 Product Features ...
![[Australia - AusPower] - Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2/MK2A, Reprap, Mendel](http://auspowers.com/cdn/shop/products/B078NCZFZ9_800x.jpg?v=1648555412)
Wisamic 3 Pack 220mmx220mm 3D Pr...
$111.00 AUD
{"id":7086067876020,"title":"Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel","handle":"wisamic-3-pack-220mmx220mm-3d-printing-build-surface-heat-bed-with-adhesive-10mm-grid-for-3d-printers-mk2-mk2a-reprap-mendel","description":"\u003ch3\u003eWisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Dimension: 220mm x 220mm Thickness: 0.5mm Color: Black\nCompatibility: PLA, PETG, ABS, etc. Package content: 3 x 3D Printing Build\nSurface\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEasy installation - This 3D printing build surface has plated with adhesive for easy install on your 3D Printer. Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward.\u003c\/li\u003e\n \u003cli\u003eMore convenient - Comes with 1cm grid line full printing. Easy to calibrate your 3D printers and the size of your 3D prints. Besides, it is also easy to trim to size with scissors for a smaller print bed.\u003c\/li\u003e\n \u003cli\u003eDimension - 220mm x 220mm; Thickness - 0.5mm\u003c\/li\u003e\n \u003cli\u003eLong life - Single sheet installs quickly with less hassle than film or tape. Long print life per sheet. Extend the life of a sheet by wiping with a magic sponge when needed.\u003c\/li\u003e\n \u003cli\u003eCompatibility - Works well with PLA, PETG, ABS and more filament types. Specially designed to fit the 3D Printers MK2\/MK2A, Reprap, Mendel.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:11:16+11:00","created_at":"2022-03-18T18:11:16+11:00","vendor":"Wisamic","type":"3D Printer Platforms","tags":["auspowers_batchone"],"price":11100,"price_min":11100,"price_max":11100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334012838068,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B078NCZFZ9","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel","public_title":null,"options":["Default Title"],"price":11100,"weight":136,"compare_at_price":null,"inventory_management":null,"barcode":"H010021","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B078NCZFZ9.jpg?v=1648555412","\/\/auspowers.com\/cdn\/shop\/products\/61vk_9AleTL.jpg?v=1647587476","\/\/auspowers.com\/cdn\/shop\/products\/61VRdz3HufL.jpg?v=1647587476","\/\/auspowers.com\/cdn\/shop\/products\/61SqmvRqGGL.jpg?v=1647587476"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B078NCZFZ9.jpg?v=1648555412","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel ","id":25346194505908,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B078NCZFZ9.jpg?v=1648555412"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B078NCZFZ9.jpg?v=1648555412","width":1200},{"alt":"[Australia - AusPower] - Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel ","id":25200995664052,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61vk_9AleTL.jpg?v=1647587476"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61vk_9AleTL.jpg?v=1647587476","width":1200},{"alt":"[Australia - AusPower] - Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel ","id":25200995696820,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61VRdz3HufL.jpg?v=1647587476"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61VRdz3HufL.jpg?v=1647587476","width":1200},{"alt":"[Australia - AusPower] - Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel ","id":25200995729588,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61SqmvRqGGL.jpg?v=1647587476"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61SqmvRqGGL.jpg?v=1647587476","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eWisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2\/MK2A, Reprap, Mendel\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eSpecification: Dimension: 220mm x 220mm Thickness: 0.5mm Color: Black\nCompatibility: PLA, PETG, ABS, etc. Package content: 3 x 3D Printing Build\nSurface\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eEasy installation - This 3D printing build surface has plated with adhesive for easy install on your 3D Printer. Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward.\u003c\/li\u003e\n \u003cli\u003eMore convenient - Comes with 1cm grid line full printing. Easy to calibrate your 3D printers and the size of your 3D prints. Besides, it is also easy to trim to size with scissors for a smaller print bed.\u003c\/li\u003e\n \u003cli\u003eDimension - 220mm x 220mm; Thickness - 0.5mm\u003c\/li\u003e\n \u003cli\u003eLong life - Single sheet installs quickly with less hassle than film or tape. Long print life per sheet. Extend the life of a sheet by wiping with a magic sponge when needed.\u003c\/li\u003e\n \u003cli\u003eCompatibility - Works well with PLA, PETG, ABS and more filament types. Specially designed to fit the 3D Printers MK2\/MK2A, Reprap, Mendel.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}
![[Australia - AusPower] - Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2/MK2A, Reprap, Mendel](http://auspowers.com/cdn/shop/products/B078NCZFZ9_1024x.jpg?v=1648555412)
Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2/MK2A, Reprap, Mendel
$111.00 AUD
Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive, 10mm Grid, for 3D Printers MK2/MK2A, Reprap, Mendel Specification: Dimension: 220mm x 220mm Thickness: 0.5mm Color: Black Compatibility: PLA, PETG, ABS, etc. Package content: 3 x 3D Printing Build Surface Product Features Easy installation - This 3D printi...
![[Australia - AusPower] - 25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5](http://auspowers.com/cdn/shop/products/B0918Z92TM_800x.jpg?v=1648555408)
25Pcs 3D Printer Nozzle Kit MK8...
$84.00 AUD
{"id":7086067810484,"title":"25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5","handle":"25pcs-3d-printer-nozzle-kit-mk8-extruder-nozzles-brass-print-head-0-2mm-0-3mm-0-4mm-0-5mm-0-6mm-0-8mm-1-0mm-with-storage-box-compatible-with-3d-printer-makerbot-creality-cr-10-ender-3-5","description":"\u003ch3\u003e25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eApplicability and Compatibility MK8 extruder nozzles fit\nfor 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3,\ncompatible with all 1.75mm PLA ABS 3D printer Precise Size The 3D printer\nnozzle through long-term testing to solve the problem of plugging and missing\nmaterials to the greatest extent, low thermal conductivity, resistant to\ncorrosion, high abrasion resistance. Read more Perfectly Circular and Thread\nThe extrusion holes are centered and concentric, the bore is smooth, and the\nthreads are clean, connect with M6 out the thread, easy to install, it matches\nthe factory parts exactly. Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePackage include--20 pieces MK8 nozzles(0.2mm2,0.3mm2,0.4mm8,.0.5mm2,0.6mm2.0.8mm2,1.0mm2), 5 pieces 3D printer nozzle cleaning needles, the whole set can meet your various needs\u003c\/li\u003e\n \u003cli\u003ePremium Materials--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.\u003c\/li\u003e\n \u003cli\u003eApplicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10,Ender 3 5,MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer.\u003c\/li\u003e\n \u003cli\u003ePrecise Design--MK8 Nozzle through long-term testing to solve the problem of plugging and missing materials to the greatest extent, low thermal conductivity, resistant to corrosion, high abrasion resistance.\u003c\/li\u003e\n \u003cli\u003eParameter--Input diameter 1.75mm; output diameter 0.2mm,0.3mm,0.4mm,.0.5mm,0.6mm.0.8mm,1.0mm ; Screw thread: M6;Hexagon diameter: 6mm\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:11:13+11:00","created_at":"2022-03-18T18:11:13+11:00","vendor":"Fgithk","type":"3D Printer Extruders","tags":["auspowers_batchone"],"price":8400,"price_min":8400,"price_max":8400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334012739764,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B0918Z92TM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5","public_title":null,"options":["Default Title"],"price":8400,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"3d nozzle","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B0918Z92TM.jpg?v=1648555408","\/\/auspowers.com\/cdn\/shop\/products\/61pUvCbbqrL.jpg?v=1647587473","\/\/auspowers.com\/cdn\/shop\/products\/71dQJ_PtffS.jpg?v=1647587473","\/\/auspowers.com\/cdn\/shop\/products\/61Ejie9GK_S.jpg?v=1647587473","\/\/auspowers.com\/cdn\/shop\/products\/61rRtnC7MDS.jpg?v=1647587473"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B0918Z92TM.jpg?v=1648555408","options":["Title"],"media":[{"alt":"[Australia - AusPower] - 25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5 ","id":25346193490100,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B0918Z92TM.jpg?v=1648555408"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B0918Z92TM.jpg?v=1648555408","width":1500},{"alt":"[Australia - AusPower] - 25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5 ","id":25200994910388,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61pUvCbbqrL.jpg?v=1647587473"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61pUvCbbqrL.jpg?v=1647587473","width":1000},{"alt":"[Australia - AusPower] - 25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5 ","id":25200994943156,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71dQJ_PtffS.jpg?v=1647587473"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71dQJ_PtffS.jpg?v=1647587473","width":1500},{"alt":"[Australia - AusPower] - 25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5 ","id":25200994975924,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Ejie9GK_S.jpg?v=1647587473"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Ejie9GK_S.jpg?v=1647587473","width":1000},{"alt":"[Australia - AusPower] - 25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5 ","id":25200995008692,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61rRtnC7MDS.jpg?v=1647587473"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61rRtnC7MDS.jpg?v=1647587473","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eApplicability and Compatibility MK8 extruder nozzles fit\nfor 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3,\ncompatible with all 1.75mm PLA ABS 3D printer Precise Size The 3D printer\nnozzle through long-term testing to solve the problem of plugging and missing\nmaterials to the greatest extent, low thermal conductivity, resistant to\ncorrosion, high abrasion resistance. Read more Perfectly Circular and Thread\nThe extrusion holes are centered and concentric, the bore is smooth, and the\nthreads are clean, connect with M6 out the thread, easy to install, it matches\nthe factory parts exactly. Read more\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003ePackage include--20 pieces MK8 nozzles(0.2mm2,0.3mm2,0.4mm8,.0.5mm2,0.6mm2.0.8mm2,1.0mm2), 5 pieces 3D printer nozzle cleaning needles, the whole set can meet your various needs\u003c\/li\u003e\n \u003cli\u003ePremium Materials--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.\u003c\/li\u003e\n \u003cli\u003eApplicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10,Ender 3 5,MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer.\u003c\/li\u003e\n \u003cli\u003ePrecise Design--MK8 Nozzle through long-term testing to solve the problem of plugging and missing materials to the greatest extent, low thermal conductivity, resistant to corrosion, high abrasion resistance.\u003c\/li\u003e\n \u003cli\u003eParameter--Input diameter 1.75mm; output diameter 0.2mm,0.3mm,0.4mm,.0.5mm,0.6mm.0.8mm,1.0mm ; Screw thread: M6;Hexagon diameter: 6mm\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}
![[Australia - AusPower] - 25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5](http://auspowers.com/cdn/shop/products/B0918Z92TM_1024x.jpg?v=1648555408)
25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5
$84.00 AUD
25Pcs 3D Printer Nozzle Kit MK8 Extruder Nozzles Brass Print Head 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box Compatible with 3D Printer Makerbot Creality CR-10 Ender 3 5 Applicability and Compatibility MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm P...
![[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard](http://auspowers.com/cdn/shop/products/B08G4MYYVL_800x.jpg?v=1648555280)
Official Creality New Upgrade Mo...
$220.00 AUD
{"id":7086065352884,"title":"Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard","handle":"official-creality-new-upgrade-motherboard-silent-mainboard-v4-2-7-for-ender-3-customized-and-non-standard-matching-ender-3-silent-mother-board-ender3-silent-mainboard","description":"\u003ch3\u003eOfficial Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis new upgraded silent mainboard does not currently come pre-installed on\nour Ender 3, Ender 3 Pro, Ender 3 v2 or Ender 5 printers. At this point, the\nsilent motherboard is a separate upgrade for all 3 Ender’s series 3D Printer.\nThe firmware for the Ender 3 comes pre-installed, but this mainboard works\nexcellent for the Ender 5 as well! For Ender 5, you will need to install\nthe.HEX file yourself. For the Ender 3 Ender 3 Pro , you just plug them in and\nstart printing!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCreality new release silent motherboard V4.2.7 ,32bit, compatible with Ender 3.\u003c\/li\u003e\n \u003cli\u003eSuper quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card \u0026amp; power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.\u003c\/li\u003e\n \u003cli\u003eThermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.\u003c\/li\u003e\n \u003cli\u003eFirmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug \u0026amp; play.\u003c\/li\u003e\n \u003cli\u003eThis silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro\/Ender3 v2\/ Ender-5, need to flash the Ender 3 Pro\/Ender 3 v2\/Ender5 firmware.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:07:00+11:00","created_at":"2022-03-18T18:07:00+11:00","vendor":"Cregrant","type":"3D Printer Accessories","tags":["auspowers_batchone"],"price":22000,"price_min":22000,"price_max":22000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334003531956,"title":"Ender3 Silent Mainboard","option1":"Ender3 Silent Mainboard","option2":null,"option3":null,"sku":"B08G4MYYVL","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard - Ender3 Silent Mainboard","public_title":"Ender3 Silent Mainboard","options":["Ender3 Silent Mainboard"],"price":22000,"weight":136,"compare_at_price":null,"inventory_management":null,"barcode":"CA-3ZB","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B08G4MYYVL.jpg?v=1648555280","\/\/auspowers.com\/cdn\/shop\/products\/71aV9kX8B0L.jpg?v=1647587221","\/\/auspowers.com\/cdn\/shop\/products\/61Jloc8NbwL.jpg?v=1647587221","\/\/auspowers.com\/cdn\/shop\/products\/61tXUbt3y-L.jpg?v=1647587221","\/\/auspowers.com\/cdn\/shop\/products\/61FPzjP873L.jpg?v=1647587221","\/\/auspowers.com\/cdn\/shop\/products\/71MqXutrtXL.jpg?v=1647587221"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B08G4MYYVL.jpg?v=1648555280","options":["Size"],"media":[{"alt":"[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard ","id":25346168062132,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1600,"width":1600,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B08G4MYYVL.jpg?v=1648555280"},"aspect_ratio":1.0,"height":1600,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B08G4MYYVL.jpg?v=1648555280","width":1600},{"alt":"[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard ","id":25200860364980,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71aV9kX8B0L.jpg?v=1647587221"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71aV9kX8B0L.jpg?v=1647587221","width":1000},{"alt":"[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard ","id":25200860430516,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Jloc8NbwL.jpg?v=1647587221"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Jloc8NbwL.jpg?v=1647587221","width":1000},{"alt":"[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard ","id":25200860463284,"position":4,"preview_image":{"aspect_ratio":0.721,"height":1095,"width":790,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61tXUbt3y-L.jpg?v=1647587221"},"aspect_ratio":0.721,"height":1095,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61tXUbt3y-L.jpg?v=1647587221","width":790},{"alt":"[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard ","id":25200860496052,"position":5,"preview_image":{"aspect_ratio":0.719,"height":1099,"width":790,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61FPzjP873L.jpg?v=1647587221"},"aspect_ratio":0.719,"height":1099,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61FPzjP873L.jpg?v=1647587221","width":790},{"alt":"[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard ","id":25200860561588,"position":6,"preview_image":{"aspect_ratio":1.426,"height":753,"width":1074,"src":"\/\/auspowers.com\/cdn\/shop\/products\/71MqXutrtXL.jpg?v=1647587221"},"aspect_ratio":1.426,"height":753,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/71MqXutrtXL.jpg?v=1647587221","width":1074}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eOfficial Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis new upgraded silent mainboard does not currently come pre-installed on\nour Ender 3, Ender 3 Pro, Ender 3 v2 or Ender 5 printers. At this point, the\nsilent motherboard is a separate upgrade for all 3 Ender’s series 3D Printer.\nThe firmware for the Ender 3 comes pre-installed, but this mainboard works\nexcellent for the Ender 5 as well! For Ender 5, you will need to install\nthe.HEX file yourself. For the Ender 3 Ender 3 Pro , you just plug them in and\nstart printing!\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCreality new release silent motherboard V4.2.7 ,32bit, compatible with Ender 3.\u003c\/li\u003e\n \u003cli\u003eSuper quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card \u0026amp; power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.\u003c\/li\u003e\n \u003cli\u003eThermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.\u003c\/li\u003e\n \u003cli\u003eFirmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug \u0026amp; play.\u003c\/li\u003e\n \u003cli\u003eThis silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro\/Ender3 v2\/ Ender-5, need to flash the Ender 3 Pro\/Ender 3 v2\/Ender5 firmware.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}
![[Australia - AusPower] - Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard](http://auspowers.com/cdn/shop/products/B08G4MYYVL_1024x.jpg?v=1648555280)
Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board Ender3 Silent Mainboard
$220.00 AUD
Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board This new upgraded silent mainboard does not currently come pre-installed on our Ender 3, Ender 3 Pro, Ender 3 v2 or Ender 5 printers. At this point, the silent motherboard is a separate upgrade for all 3 ...
![[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series](http://auspowers.com/cdn/shop/products/B091CXPXVP_800x.jpg?v=1648555205)
Creality 3D Printer 42-40 Steppe...
$147.00 AUD
{"id":7086064206004,"title":"Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series","handle":"creality-3d-printer-42-40-stepper-motor-2-phases-1a-1-8-degrees-0-4-n-m-stepper-motor-for-3d-printer-extruder-compatible-with-e-axis-of-cr-10-series-and-ender-3-series","description":"\u003ch3\u003eCreality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e42-40 motor for the e-axis of the printer of the Creality Ender series and the\nCR series,like Ender3 \/ 3pro \/ 5 \/ 5pro \/ 5plus; CR10 \/ 10MINI \/ 10SProV2 \/\n10S4 \/ 10S5 \/ 10MAX \/ 10V2 \/ 10V3;The motor 42-40 also fits the Y-axis of\nEnder5 \/ 5pro \/ CR-10V2 \/ CR-10SProV2.Material: metalStep angle: 1.8\ndegreesPhase 2Holding torque: 0.4N.MNominal current: 1AShaft diameter: 5mm\n（D-shape）Frame size: 42 42 40mm \/ 1.7 1.7 1.6inItem weight:\n290gPackage list:1 42-40 stepper motor\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCompatible: The stepper motor 42-40 applies to Eixe series Ender and CR-10 (e.g. Ender-3 \/ Ender 3 Pro \/ CR 10 \/ CR 10S etc.).\u003c\/li\u003e\n \u003cli\u003e1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase.\u003c\/li\u003e\n \u003cli\u003eHigh Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism.\u003c\/li\u003e\n \u003cli\u003eLow noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step.\u003c\/li\u003e\n \u003cli\u003eWhat You Get: 1x 42-40 Stepper Motor (Note: This item does not include a connection cable or screws.)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T18:05:22+11:00","created_at":"2022-03-18T18:05:22+11:00","vendor":"KOYOFEI","type":"3D Printer Accessories","tags":["auspowers_batchone"],"price":14700,"price_min":14700,"price_max":14700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41334001172660,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B091CXPXVP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series","public_title":null,"options":["Default Title"],"price":14700,"weight":330,"compare_at_price":null,"inventory_management":null,"barcode":"KYF-3D-021","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B091CXPXVP.jpg?v=1648555205","\/\/auspowers.com\/cdn\/shop\/products\/617bDc4cbkL.jpg?v=1647587122","\/\/auspowers.com\/cdn\/shop\/products\/61bwyfetBAL.jpg?v=1647587122","\/\/auspowers.com\/cdn\/shop\/products\/61IsEvCeXYL.jpg?v=1647587122","\/\/auspowers.com\/cdn\/shop\/products\/61Iofnn5SvL.jpg?v=1647587122","\/\/auspowers.com\/cdn\/shop\/products\/61oZgHDNzlL.jpg?v=1647587122","\/\/auspowers.com\/cdn\/shop\/products\/61MUMpyYPcL.jpg?v=1647587122"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B091CXPXVP.jpg?v=1648555205","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series ","id":25346152890548,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1605,"width":1605,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B091CXPXVP.jpg?v=1648555205"},"aspect_ratio":1.0,"height":1605,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B091CXPXVP.jpg?v=1648555205","width":1605},{"alt":"[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series ","id":25200800334004,"position":2,"preview_image":{"aspect_ratio":0.8,"height":1500,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/617bDc4cbkL.jpg?v=1647587122"},"aspect_ratio":0.8,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/617bDc4cbkL.jpg?v=1647587122","width":1200},{"alt":"[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series ","id":25200800366772,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61bwyfetBAL.jpg?v=1647587122"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61bwyfetBAL.jpg?v=1647587122","width":1200},{"alt":"[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series ","id":25200800432308,"position":4,"preview_image":{"aspect_ratio":0.8,"height":1500,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61IsEvCeXYL.jpg?v=1647587122"},"aspect_ratio":0.8,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61IsEvCeXYL.jpg?v=1647587122","width":1200},{"alt":"[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series ","id":25200800465076,"position":5,"preview_image":{"aspect_ratio":0.8,"height":1500,"width":1200,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61Iofnn5SvL.jpg?v=1647587122"},"aspect_ratio":0.8,"height":1500,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61Iofnn5SvL.jpg?v=1647587122","width":1200},{"alt":"[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series ","id":25200800497844,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1300,"width":1300,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61oZgHDNzlL.jpg?v=1647587122"},"aspect_ratio":1.0,"height":1300,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61oZgHDNzlL.jpg?v=1647587122","width":1300},{"alt":"[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series ","id":25200800530612,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1300,"width":1300,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61MUMpyYPcL.jpg?v=1647587122"},"aspect_ratio":1.0,"height":1300,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61MUMpyYPcL.jpg?v=1647587122","width":1300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eCreality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e42-40 motor for the e-axis of the printer of the Creality Ender series and the\nCR series,like Ender3 \/ 3pro \/ 5 \/ 5pro \/ 5plus; CR10 \/ 10MINI \/ 10SProV2 \/\n10S4 \/ 10S5 \/ 10MAX \/ 10V2 \/ 10V3;The motor 42-40 also fits the Y-axis of\nEnder5 \/ 5pro \/ CR-10V2 \/ CR-10SProV2.Material: metalStep angle: 1.8\ndegreesPhase 2Holding torque: 0.4N.MNominal current: 1AShaft diameter: 5mm\n（D-shape）Frame size: 42 42 40mm \/ 1.7 1.7 1.6inItem weight:\n290gPackage list:1 42-40 stepper motor\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eCompatible: The stepper motor 42-40 applies to Eixe series Ender and CR-10 (e.g. Ender-3 \/ Ender 3 Pro \/ CR 10 \/ CR 10S etc.).\u003c\/li\u003e\n \u003cli\u003e1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase.\u003c\/li\u003e\n \u003cli\u003eHigh Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism.\u003c\/li\u003e\n \u003cli\u003eLow noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step.\u003c\/li\u003e\n \u003cli\u003eWhat You Get: 1x 42-40 Stepper Motor (Note: This item does not include a connection cable or screws.)\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}
![[Australia - AusPower] - Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series](http://auspowers.com/cdn/shop/products/B091CXPXVP_1024x.jpg?v=1648555205)
Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series
$147.00 AUD
Creality 3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series 42-40 motor for the e-axis of the printer of the Creality Ender series and the CR series,like Ender3 / 3pro / 5 / 5pro / 5plus; CR10 / 10MINI / 10SProV2 / 10S4 / 10S5 / 10MAX / ...
![[Australia - AusPower] - Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO/CR-10 Max](http://auspowers.com/cdn/shop/products/B07NDL3PNX_800x.jpg?v=1648554774)
Micro Swiss All Metal Hotend Kit...
$271.00 AUD
{"id":7086056636596,"title":"Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO\/CR-10 Max","handle":"micro-swiss-all-metal-hotend-kit-for-creality-cr-10s-pro-cr-10-max","description":"\u003ch3\u003eMicro Swiss All Metal Hotend Kit for Creality CR-10s PRO\/CR-10 Max\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eMicro Swiss All Metal Hotend Kit for Creality CR-10s PRO:\nThis is a drop in All Metal Conversion kit for the CR-10s Pro printers. It\nrequires absolutely zero modification to your printer to install. Our uniquely\ndesigned cooling block eliminates need for a thermal tube. By not having a\nseparate thermal tube inside the cooling block, it allows for faster heat\ndissipation. The thermal heat break is made from Grade 5 Titanium Alloy to\nprovide excellent thermal isolation between the heater and the cooling block.\nTitanium is extremely strong material and offers almost 3x lower thermal\nconductivity than stainless steel, creating more defined meltzone. Read more\nFits: Creality CR-10s ProCreality CR-10 Max Read more What's in the box:\nAluminum Cooling BlockGrade 5 Titanium Heat BreakAluminum Heater BlockBrass\nPlated Wear Resistant MK8 .4mm NozzleSilicone SockHardware kit Read more Micro\nSwiss MK8 Brass Plated .4mm Nozzle Micro Swiss MK8 Brass Plated .6mm Nozzle\nMicro Swiss MK8 Brass Plated .8mm Nozzle Micro Swiss MK8 A2 Plated .4mm Nozzle\nMicro Swiss MK8 A2 Plated .6mm Nozzle Micro Swiss MK8 A2 Plated .8mm Nozzle\nBase Material Brass Brass Brass A2 Hardened Tool Steel A2 Hardened Tool Steel\nA2 Hardened Tool Steel Plated ✓ ✓ ✓ ✓ ✓ ✓\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFits: CR-10S Pro \/ CR-10 Max\u003c\/li\u003e\n \u003cli\u003eOrifice size: .4mm\u003c\/li\u003e\n \u003cli\u003eKit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock, Hardware kit\u003c\/li\u003e\n \u003cli\u003eThis is a Drop in All Metal Conversion Kit for CR-10s PRO and CR-10 Max printers\u003c\/li\u003e\n \u003cli\u003eMade in USA by Micro Swiss\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T17:53:33+11:00","created_at":"2022-03-18T17:53:33+11:00","vendor":"Micro-Swiss","type":"3D Printer Extruders","tags":["auspowers_batchone"],"price":27100,"price_min":27100,"price_max":27100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41333962997940,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B07NDL3PNX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO\/CR-10 Max","public_title":null,"options":["Default Title"],"price":27100,"weight":68,"compare_at_price":null,"inventory_management":null,"barcode":"M2591-04","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B07NDL3PNX.jpg?v=1648554774","\/\/auspowers.com\/cdn\/shop\/products\/81TQzKDFrBL.jpg?v=1647586413","\/\/auspowers.com\/cdn\/shop\/products\/61H07ZHz8EL.jpg?v=1647586413"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B07NDL3PNX.jpg?v=1648554774","options":["Title"],"media":[{"alt":"[Australia - AusPower] - Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO\/CR-10 Max ","id":25346071003316,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B07NDL3PNX.jpg?v=1648554774"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B07NDL3PNX.jpg?v=1648554774","width":2560},{"alt":"[Australia - AusPower] - Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO\/CR-10 Max ","id":25200716742836,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/auspowers.com\/cdn\/shop\/products\/81TQzKDFrBL.jpg?v=1647586413"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/81TQzKDFrBL.jpg?v=1647586413","width":2560},{"alt":"[Australia - AusPower] - Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO\/CR-10 Max ","id":25200716775604,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2560,"width":2560,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61H07ZHz8EL.jpg?v=1647586413"},"aspect_ratio":1.0,"height":2560,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61H07ZHz8EL.jpg?v=1647586413","width":2560}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eMicro Swiss All Metal Hotend Kit for Creality CR-10s PRO\/CR-10 Max\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eMicro Swiss All Metal Hotend Kit for Creality CR-10s PRO:\nThis is a drop in All Metal Conversion kit for the CR-10s Pro printers. It\nrequires absolutely zero modification to your printer to install. Our uniquely\ndesigned cooling block eliminates need for a thermal tube. By not having a\nseparate thermal tube inside the cooling block, it allows for faster heat\ndissipation. The thermal heat break is made from Grade 5 Titanium Alloy to\nprovide excellent thermal isolation between the heater and the cooling block.\nTitanium is extremely strong material and offers almost 3x lower thermal\nconductivity than stainless steel, creating more defined meltzone. Read more\nFits: Creality CR-10s ProCreality CR-10 Max Read more What's in the box:\nAluminum Cooling BlockGrade 5 Titanium Heat BreakAluminum Heater BlockBrass\nPlated Wear Resistant MK8 .4mm NozzleSilicone SockHardware kit Read more Micro\nSwiss MK8 Brass Plated .4mm Nozzle Micro Swiss MK8 Brass Plated .6mm Nozzle\nMicro Swiss MK8 Brass Plated .8mm Nozzle Micro Swiss MK8 A2 Plated .4mm Nozzle\nMicro Swiss MK8 A2 Plated .6mm Nozzle Micro Swiss MK8 A2 Plated .8mm Nozzle\nBase Material Brass Brass Brass A2 Hardened Tool Steel A2 Hardened Tool Steel\nA2 Hardened Tool Steel Plated ✓ ✓ ✓ ✓ ✓ ✓\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eFits: CR-10S Pro \/ CR-10 Max\u003c\/li\u003e\n \u003cli\u003eOrifice size: .4mm\u003c\/li\u003e\n \u003cli\u003eKit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock, Hardware kit\u003c\/li\u003e\n \u003cli\u003eThis is a Drop in All Metal Conversion Kit for CR-10s PRO and CR-10 Max printers\u003c\/li\u003e\n \u003cli\u003eMade in USA by Micro Swiss\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}
![[Australia - AusPower] - Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO/CR-10 Max](http://auspowers.com/cdn/shop/products/B07NDL3PNX_1024x.jpg?v=1648554774)
Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO/CR-10 Max
$271.00 AUD
Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO/CR-10 Max Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO: This is a drop in All Metal Conversion kit for the CR-10s Pro printers. It requires absolutely zero modification to your printer to install. Our uniquely designed cooling block eliminates need for a thermal tube. By not ha...
