{"product_id":"water-based-seal-for-3d-printing-100ml-3d-paint-airtight-protection","title":"Water-Based Seal for 3D Printing, 100ML 3D Paint, Airtight Protection","description":"\u003ch3\u003eWater-Based Seal for 3D Printing, 100ML 3D Paint, Airtight Protection\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThis water-based 3D printing sealant has been developed for post-processing in\nadditive manufacturing and is suitable for common printing materials such as\nPLA, ABS and PETG. It is characterised by a water-based, environmentally\nfriendly formula with low odour. The sealant forms a tight seal on the surface\nof printed parts, improving their resistance to water, dust and oxidation,\nwhile maintaining excellent flexibility and adhesion. Product Name: 3D\nPrinting Seal Product specifications: 100ml Product advantages: 1. Wide\nCompatibility Compatible with a variety of 3D printing materials and\nprocesses. 2. Excellent sealing performance: effectively fills gaps between\nlayers, improving the overall strength and sealing of printed parts. 3. Re-\nprocessing-friendly: after curing, easy to sand and dye, without affecting the\nsubsequent processing. 4. WEATHER RESISTANT - Suitable for various indoor and\noutdoor applications, resistant to aging and yellowing. Recommendations for\nuse: 1. Preparation: Make sure the printed part is completely clean and free\nof dust, grease and carrier material residue. For best results, lightly sand\nthe surface with fine sandpaper beforehand. 2. Stir well: stir the sealing\nadhesive thoroughly in the bottle before use. 3. How to apply: (1) Paint:\nSuitable for medium and large models. Apply an even layer with a soft brush.\nBe careful not to leave brush marks or excessive fluid buildup. (2) Soaking:\nsuitable for small or complex models. Immerse the part completely into the\nadhesive for a few seconds, then remove it and let the excess liquid drip off.\n(3) Spray: Suitable for large models that require extremely high surface\nflatness. After diluting with a spray gun, spray several thin layers. 4.\nDrying and curing: place the treated model in a well-ventilated and dust-free\nplace to dry. The surface dries after about 1-2 hours. Full curing usually\ntakes 24 hours (the exact time depends on ambient temperature, humidity and\nlayer thickness). Please make sure the surface is fully cured before using it.\nPrecautions: 1. Keep out of reach of children to avoid accidental swallowing\nor misuse. 2. This product is water-based. Do not mix with water before use,\nso as not to affect curing. 3. Please close the container after use to avoid\nprolonged exposure to air, which can lead to drying out.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n  \u003cul class=\"a\"\u003e\n         \u003cli\u003eSTRONG SEALING Effectively penetrates the 3D printed layers and forms a tough, transparent protective film that significantly improves the strength, abrasion resistance and impact resistance of the model.\u003c\/li\u003e\n         \u003cli\u003eWaterproof and moisture-proof: sealant waterproof seals the micropores on the surface of the model, prevents moisture and water from penetrating and thus preventing deformation and loss of strength of the model due to moisture. It is particularly suitable for functional parts or models for outdoor exhibition.\u003c\/li\u003e\n         \u003cli\u003eHIGH TRANSPARENCY The milky white adhesive shows a transparent appearance after curing without yellowing or clouding. This perfectly preserves the original colour and fine details of the printed model and even give it a slight gloss that improves the look.\u003c\/li\u003e\n         \u003cli\u003eWATER BASED FORMULA - Thanks to advanced water-based polymer technology, it contains no organic solvents and has low odour stimulation, which ensures a healthy indoor climate in your home and workplace.\u003c\/li\u003e\n         \u003cli\u003eEasy to use: excellent fluidity allows you to apply with brush, dip or spray. Tools and hands can be easily cleaned with water after use, saving time and effort.\u003c\/li\u003e\n  \u003c\/ul\u003e","brand":"Allony","offers":[{"title":"Default Title","offer_id":44375753261236,"sku":"uk-B0FS1HTLLM","price":168.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/9906\/1172\/files\/uk-B0FS1HTLLM.jpg?v=1788345040","url":"https:\/\/auspowers.com\/products\/water-based-seal-for-3d-printing-100ml-3d-paint-airtight-protection","provider":"AusPower Australia","version":"1.0","type":"link"}