{"product_id":"laser-engraver-motherboard-functional-520kbyte-ram-built-in-wifi-32bit-8192kbytes-flash-support-lcd-laser-engraver-control-board-for-diy-mainboard","title":"Laser Engraver Motherboard, Functional 520KByte RAM Built-in WiFi 32bit 8192KBytes Flash Support LCD Laser Engraver Control Board for DIY (Mainboard)","description":"\u003ch3\u003eLaser Engraver Motherboard, Functional 520KByte RAM Built-in WiFi 32bit 8192KBytes Flash Support LCD Laser Engraver Control Board for DIY (Mainboard)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003e1. MKS DLC32 MOTHERBOARD: Offline engraving main control board, developed\nspecifically for desktop engraving machines. Adopts ESP32 WROOM 32U module,\nembedded with dual 32 bit high speed MCU, clock up to 240MHz, integrated with\nWIFI and BT modules, could directly drive 2.4 or 3.5 inch touch color screen.\n2. MULTI FUNCTION: Can achieve functions such as fast carving and webpage\ncontrol, mobile APP control. The installation holes and circuit board size are\ncompatible with MKSDLC and can also be used with for GRBLaser and for\nLightBurnPC software. 3. LARGE MEMORY AND HIGH SPEED: In addition, the module\nis equipped with an 8M Flash storage chip, providing effective protection for\nmore application scenarios. Thanks to the high speed IO flipping speed and\npowerful timer, MKSDLC32 can achieve a very high carving speed, which have\nmeasured to achieve 8000mm per minute. 4. OFFLINE USE: MKS has developed a web\npage for DLC32. As long as you log in to the IP address of the motherboard\nusing a browser within the local area network, you can perform engraving, file\ntransfer, etc. operations. Can be used offline without the need to connect to\na computer, can be controlled, carved using touch screen. 5. DLC 32 PROTECTIVE\nCASE: The 3D printer motherboard is the component that controls the operation\nof the entire printer and needs to be protected from damage and the\npossibility of circuit short circuits. The case can improve the stability and\naccuracy, enhance the appearance and aesthetics, and extend the service life\nof the 3D printer. Specification: Item Type: Laser Engraver Control Board\nMaterial: PCB Main Board Parameters: Model: MKSDLC32 MCU: ESP32-WROOM-320\n(32bits) MCU Frequency: 240MHz FLASH: 8192KBytes RAM: 520KBytes Engraving\nSpeed: PC Engraving: Support Offline Mode: Support LCD: Support Integrated\nWIFI: Support Web Page Control: Support Mobile APP Control: Support for\nGRBLaser: Support for LightBurn\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n  \u003cul class=\"a\"\u003e\n         \u003cli\u003eMULTI FUNCTION: Can achieve functions such as fast carving and webpage control, mobile APP control. The installation holes and circuit board size are compatible with MKSDLC and can also be used with for GRBLaser and for LightBurnPC software.\u003c\/li\u003e\n         \u003cli\u003eLARGE MEMORY AND HIGH SPEED: In addition, the module is equipped with an 8M Flash storage chip, providing effective protection for more application scenarios. Thanks to the high speed IO flipping speed and powerful timer, MKSDLC32 can achieve a very high carving speed, which have measured to achieve 8000mm per minute.\u003c\/li\u003e\n         \u003cli\u003eMKS DLC32 MOTHERBOARD: Offline engraving main control board, developed specifically for desktop engraving machines. Adopts ESP32 WROOM 32U module, embedded with dual 32 bit high speed MCU, clock up to 240MHz, integrated with WIFI and BT modules, could directly drive 2.4 or 3.5 inch touch color screen.\u003c\/li\u003e\n         \u003cli\u003eDLC 32 PROTECTIVE CASE: The 3D printer motherboard is the component that controls the operation of the entire printer and needs to be protected from damage and the possibility of circuit short circuits. The case can improve the stability and accuracy, enhance the appearance and aesthetics, and extend the service life of the 3D printer.\u003c\/li\u003e\n         \u003cli\u003eOFFLINE USE: MKS has developed a web page for DLC32. As long as you log in to the IP address of the motherboard using a browser within the local area network, you can perform engraving, file transfer, etc. operations. Can be used offline without the need to connect to a computer, can be controlled, carved using touch screen.\u003c\/li\u003e\n  \u003c\/ul\u003e","brand":"Jectse","offers":[{"title":"Default Title","offer_id":44375722918068,"sku":"uk-B0CWPXKPBV","price":233.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/9906\/1172\/files\/uk-B0CWPXKPBV.jpg?v=1788344919","url":"https:\/\/auspowers.com\/products\/laser-engraver-motherboard-functional-520kbyte-ram-built-in-wifi-32bit-8192kbytes-flash-support-lcd-laser-engraver-control-board-for-diy-mainboard","provider":"AusPower Australia","version":"1.0","type":"link"}