IdeaFormer-3D Magnetic Print Bed 3D Printer Build Surface (150 X 150mm) Flexible Removable Heated Bed (2 pcs Print Surface + 1 pcs Base) for FDM 3D Printer 150 X 150
IdeaFormer-3D Magnetic Print Bed 3D Printer Build Surface (150 X 150mm) Flexible Removable Heated Bed (2 pcs Print Surface + 1 pcs Base) for FDM 3D Printer
Flexible Removable Magnetic Bed The product is divided into two parts: A (upper)+B(lower). Part A, the top is a matte surface, and the back is magnetic (the interaction with the front of Part B plays an attractive role). Part B, the top is magnetic (with the adsorption under the A part), the back is the adhesive (posted on the printer platform, which plays a fixed role) This product is rated for use with PLA filaments ONLY. Works with all FDM printer models, and all heated and non-heated 3D printer beds. In order to facilitate the operation, our A surface is about 2-5mm larger than B surface. The actual size of B surface shall prevail. But the use will not be affected. Magnetic Build Surface The product is divided into two parts (A+B). Part A, the top is a matte surface, and the back is magnetic. Part B, the top is magnetic, and the back is the adhesive. Easy Model Remove This surface is flexible and easily removed. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands Easy to install After finding the correct magnetic direction, you just need to stick the bottom part on the clean hot bed. Make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed. Please pay attention to the direction before installation. Read more Attention Do not let the heated nozzle touch the magnetic build surface directly. Please level the build plate well before printing. If you have any unsolvable problems during installation or using, please contact our technical team, and they will provide you with detailed solutions within 24 hours. If you can share your purchasing experience is better. We will be devoted to producing high quality products & providing better service. Advantages Separation type bending to take off the model.Don't need the removal tools and scraper to assist the model.No warping edges. No glue is needed.Has provided an excellent flatness platform.Can be cut to any demensions easily, making it perfect for all build sizes. Kindly Note This Magnetic Build Surface is rated for PLA filaments ONLY. Any other filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force over time. This will not prevent your printing from warping.The printer Bed is not used for high- temperature above 80°C. Read more PEI Spring Steel Heat Bed Textured PEI Spring Steel Heat Bed IdeaFormer Glass Plate Magnetic Stickers Heated Bed IdeaFormer 3D Printer COBEES IdeaFormer 3D Printer Mega/Pro/Gaint Printable Area 150150/220220/235235/310310mm 220220/235235/310310mm 220220/235235/310310mm 150150/200200/214214/235235/310310mm 120120120mm 20000mm Max Temperature 120℃ 120℃ 120℃ 70℃ N/A N/A Fit for FDM 3D Printer FDM 3D Printer FDM 3D Printer FDM 3D Printer N/A N/A Material PEI Dual PEI Powder coating Glass Magnetic Sticker N/A N/A
Product Features
- Features: The product includes three pieces of stickers(2pcs A plate and 1pcs B plate). Its surprising that our product is more 1pcs A plate than other brands. It can be reused and means that replacing the new A side is more time-saving. (The A plate is 5mm wider than the B plate)Kindly Tips:Our magnetic platform A and B must be used in pairs.
- Easy to use: Can be installed on hot beds and glass platforms. Printing is not warping. No glue is required. Can be printed on a cold bed. The A-plate is flexible and magnetic, making it easy to move off the platform and take away the printing model.
- Material: We are PC material, long - term 80 degrees. More than 80 C of magnetic performance will weaken but not lose magnetism, so can be applied to polylactic acid and other filaments. PC material flame retardant, wear - resistant. Good antioxidant, low mold shrinkage, good dimensional stability.
- Specification: AAB three sides in the package, A side is greater than B side (actual size is B side) dimensions: 150x150/200x200/214x214/220x220/235x235/310x310. (mm)
- Please do not allow the heated nozzle to come into direct contact with the A-plate! For ease of operation, the desktop is heated to 50 degrees C when the model is taken, and then the model is taken.