{"product_id":"dc-brushless-motor-controller-ws55-220-dc-48v-500w-cnc-controller-high-speed-brushless-spindle-bldc-motor-driver-controller-analog-speed-regulation-motor-driver","title":"DC Brushless Motor Controller, WS55-220 DC 48V 500W CNC Controller High Speed Brushless Spindle BLDC Motor Driver Controller Analog Speed Regulation Motor Driver","description":"\u003ch3\u003eDC Brushless Motor Controller, WS55-220 DC 48V 500W CNC Controller High Speed Brushless Spindle BLDC Motor Driver Controller Analog Speed Regulation Motor Driver\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe driver is based on advanced technology and be provided\nwith high speed, high torque, low noise, low vibration, over current\nprotection, overload protection, less phase line. protection, phase line short\nprotection, alarm output, speed signal output, positive negative rotation\ncontrol etc. This controller can be used in small equipment, Electric Power\nTools, exhaust Fan, Jade grinding machine, Vibrating motor etc. Read more\nSpecifications: Rated voltage: 20 to 50 VDC Rated current: 12A Current\nlimiting: 15A Maximum speed: 20000RPM( the specific speed depends on the motor\nitself and load) Storage temperature: -20℃~+65℃ Usage environment: Avoid\ndirect contact with dust, fumes and corrosive gases Temperature: 0-45℃\nHumidity: \u0026lt; 80%, no frost, frost free Shock: 5.9m\/S2 Maximum Storage humidity:\n0~95%RH Size: Approx. 9.5 x 6 x 3.5cm \/ 3.74 x 2.36 x 1.38inch Weight: 258g\nPackage included: 1 x Motor Driver Controller with cable Note: Please note\nthat the new type and old type of this product will be sent randomly, and make\nsure you will not mind before ordering. Read more Detail: 1.Two modes of speed\nregulation: External potentiometer: through this potentiometer speed\nregulation; External voltage: external 10VDC voltage speed regulation; Note:\nThe two speed regulation can not be used simultaneously 2. Speed output PG\nsignal: There is a 5v-revolution pulse output between the port and the ground.\nThe output frequency is set to P (Hz), the motor class logarithm is N, and the\nspeed is F (RPM), then the output speed frequency is P=FN\/60. 3. Alarm output\nALM signal:There is an 5V alarm pulse output between the port and the ground.\n4. Positive inversion function: F\/R:Fiddle the toggle switch on the\ncorresponding side, the motor steering direction can be changed. For the\ntoggle switch, the white part is up and down, then twang it up and down. For\nthe toggle switch, the white part is horizontal, and the twang horizontally.\n5. Start-stop (two control modes): 1. External switch EN: Transfer through\nswitch. 2. Side toggle switch EN: for the toggle switch, the white part is up\nand down, then down for the start; for the toggle switch, the white part is\nhorizontal, then dial to start Note: You can only turn one control at the same\ntime, one of the switches is closed, and the other one is valid. 6. Locked-\nrotor protection:If the motor stops working, switch on the power again to\nstart. 7. Power light: Green light: power on and off 8. Status light: Red\nlight: two flashes in standby time, after starting, extinguish. 9. Insulation\nresistance: \u0026gt;100M at ambient temperature and atmospheric pressure 10.\nInsulation strength: At normal temperature and pressure, 0.5KV, 1 minutes Read\nmore\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n  \u003cul class=\"a\"\u003e\n         \u003cli\u003eProduct Introduction: WS55-220 is a high performance,cost-effective 3 phase BLDC motor controller.Voltage range is from DC 20V to DC 50V.\u003c\/li\u003e\n         \u003cli\u003eTwo Modes of Speed Regulation: External potentiometer through this potentiometer speed regulation, external voltage through external 10VDC voltage speed regulation, But the two speed regulation can not be used simultaneously.\u003c\/li\u003e\n         \u003cli\u003eHigh Performance: The driver is based on advanced technology and be provided with high speed, high torque, low noise, low vibration, over current protection, overload protection, less phase line.\u003c\/li\u003e\n         \u003cli\u003eMultiple Protection Function: This motor driver has phase line short protection, overvoltage protection, over-current protection, locked-rotor protection function etc.\u003c\/li\u003e\n         \u003cli\u003eWide Application: This motor driver controller can be used in small equipment, such as electric power tools, exhaust Fan, Jade grinding machine, Vibrating motor etc.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n","brand":"Garosa","offers":[{"title":"Default Title","offer_id":41600801374388,"sku":"B07Y5WP5L8","price":256.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/9906\/1172\/products\/B07Y5WP5L8.jpg?v=1655969041","url":"https:\/\/auspowers.com\/products\/dc-brushless-motor-controller-ws55-220-dc-48v-500w-cnc-controller-high-speed-brushless-spindle-bldc-motor-driver-controller-analog-speed-regulation-motor-driver","provider":"AusPower Australia","version":"1.0","type":"link"}