{"product_id":"3pcs-usb-logic-analyzer-device-with-usb-cable-5mhz-24mhz-8ch-8-channel-uart-iic-spi-debug-logic-analyzer-professional-microcontroller-device-network-analysis-set-for-arduino-fpga-arm-m100-scm","title":"3pcs USB Logic Analyzer Device with USB Cable 5MHz 24MHz 8CH 8 Channel UART IIC SPI Debug Logic Analyzer Professional Microcontroller Device Network Analysis Set for Arduino FPGA ARM M100 SCM","description":"\u003ch3\u003e3pcs USB Logic Analyzer Device with USB Cable 5MHz 24MHz 8CH 8 Channel UART IIC SPI Debug Logic Analyzer Professional Microcontroller Device Network Analysis Set for Arduino FPGA ARM M100 SCM\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eFeatures: Digital Channels: 8 Input voltage range: -0.5V to 5.25V Input\nvoltage: -0.5V to 0.8V Input voltage: 2.0V to 5.25V Works with 5V, 3.3V, 2.5V,\n2.0V systems. Works with 1.8V but not recommended. Input impedance: 1 mOhm ||\n10 pF (typical, approximate) Crystal: +\/-20ppm 24MHz Error\/Accuracy: Pulse\nwidth measurement: +\/- 42ns (at 24MHz) Suitable for single chip development,\nARM system development, FPGA development. In order for your computer to\nmaximize the sampling rate, you need to ensure the following conditions: 1.\nMake sure no other major programs record the CPU for a long time. 2. Make sure\nthere is enough storage space, otherwise the computer does not have enough RAM\nto get the data of the logic analyzer. 3. Connect it as much as possible\ndirectly to the USB port of the computer instead of using a USB hub. 4. Try\nthat other USB devices require less USB resources as much as possible. 5. If\nyou want the logic analyzer to have enough power to increase the sampling\nfrequency, use as much as possible. Package includes: 3 x Analyzer 3 x USB\nCables 30 x Dupont Cables\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n  \u003cul class=\"a\"\u003e\n         \u003cli\u003eThe logic analyzer is a waveform test device similar to an oscilloscope. It collects specific signals and displays them to developers using graphics or data statistics. Developers use these graphical timing signals to analyze hardware or software errors according to the protocol.\u003c\/li\u003e\n         \u003cli\u003eLogic Analyzer is an essential device in design. It can quickly locate errors, find and solve problems, especially when analyzing timing, such as 1wire, I2C, UART, SPI, CAN and other data, the application of the logic analyzer to solve problems is very fast.\u003c\/li\u003e\n         \u003cli\u003ePlug the DuPont cables into the logic analyzer interface one by one. After the DuPont cables are inserted, they are divided into 2 rows. The top row of 5 logic analyzers corresponds to the screen printing on the left side of the shell, and the lower one row corresponds to the screen printing on the right. Before testing the signal, please connect the GND channel of the logic analyzer to the GND pin of the board, otherwise the measured data will be unreliable.\u003c\/li\u003e\n         \u003cli\u003eWhen the logic analyzer works at 24M, the USB device not only needs to provide a 24M communication rate, but also need to ensure that other devices occupy USB resources before the 4 buffers are filled. For these reasons, the logic analyzer cannot always work at the sampling frequency of 24M for a long time, depending on the computer performance, availability and latency of the USB bandwidth and other devices that occupy the USB drive.\u003c\/li\u003e\n         \u003cli\u003eThe normal operating voltage of the logic analyzer is below 5.5V, the voltage below 1.5V is considered low level, voltage between 1.5V and 5.5V is considered high level, the maximum voltage resistance is 7.5V, please pay attention to the test voltage.\u003c\/li\u003e\n  \u003c\/ul\u003e","brand":"DORHEA","offers":[{"title":"Default Title","offer_id":44375176708276,"sku":"de-B099N5SM7Q","price":183.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0595\/9906\/1172\/files\/de-B099N5SM7Q.jpg?v=1788282878","url":"https:\/\/auspowers.com\/products\/3pcs-usb-logic-analyzer-device-with-usb-cable-5mhz-24mhz-8ch-8-channel-uart-iic-spi-debug-logic-analyzer-professional-microcontroller-device-network-analysis-set-for-arduino-fpga-arm-m100-scm","provider":"AusPower Australia","version":"1.0","type":"link"}