{"id":7085897449652,"title":"Boston Gear YPB4836 Spur Gear, Molded Delrin with Brass Inserts, Inch, 48 Pitch, 0.188\" Bore, 0.792\" OD, 0.125\" Face Width, 36 Teeth 8 Inches 0.125 Inches 0.792 Inches 0.188 Inches","handle":"boston-gear-ypb4836-spur-gear-molded-delrin-with-brass-inserts-inch-48-pitch-0-188-bore-0-792-od-0-125-face-width-36-teeth-8-inches-0-125-inches-0-792-inches-0-188-inches","description":"\u003ch3\u003eBoston Gear YPB4836 Spur Gear, Molded Delrin with Brass Inserts, Inch, 48 Pitch, 0.188\" Bore, 0.792\" OD, 0.125\" Face Width, 36 Teeth\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Boston Gear molded Delrin (polyoxymethylene) with brass inserts spur gear\nwith 20-degree pressure angle (PA) and a diametral pitch (DP) of 48 transmits\ntorque between parallel shafts to provide rotational power to another part of\na motorized system. It has a 20-degree pressure angle for lower contact ratio\nbetween gears, resulting in higher load capacity than smaller pressure angles,\nand a 48-diametral pitch for applications for applications where controlling\nchanges in speed and direction of rotation with precision is more important\nthan transferring torque. This spur gear, which can mesh only with spur gears\nthat have the same pressure angle and diametral pitch, is made of molded\nDelrin (polyoxymethylene) for quiet operation, low friction and moisture\nabsorption, and high resistance to heat and abrasion combined with the\ncorrosion resistance, ductility at high temperatures, and low magnetic\npermeability of brass. This Boston Gear spur gear is suitable for use in a\nvariety of commercial and industrial applications, such as construction\nequipment, aeronautics, conveyors, and manufacturing equipment, among\nothers.Spur gears, the most common gear type, have a circular or cylindrical\nshape with teeth bordering the outer perimeter and are used for transmitting\nrotational torque and motion between parallel rotating shafts. A spur gear's\npressure angle (PA), diametral pitch (also called DP or pitch), and its\nmaterial are important factors to consider when purchasing. Gears come in\nseveral types for use in different power transmission configurations and for\ndifferent applications, including bevel and miter gears (for rotating shafts\nperpendicular to each other), change gears (to increase or decrease torque and\nspeed), helical gears (for high rates of rotational speed), internal gears\n(where one gear is nested inside the other), rack and pinion gears (for\nturning rotational motion into linear motion), and worm gears (for\nperpendicular shafts in tight spaces and quiet operation). Gears are suitable\nfor use in the agriculture, automotive, construction, mining, and packaging\nindustries, and can be found in a variety of machines, including bicycles,\nautomobiles, and elevators, among others.Boston Gear manufactures a variety of\ngear drives, variable speed drives, clutches, and the components that comprise\nthese systems including sprockets and bearings. Their manufacturing designs,\nproduction, and inspection meet International Organization for Standardization\n(ISO) standards for quality assurance. The company, founded in 1877, is\nheadquartered in Charlotte, NC.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTransmits torque between parallel shafts to provide rotational power to another part of a motorized system\u003c\/li\u003e\n \u003cli\u003ePressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles\u003c\/li\u003e\n \u003cli\u003eDiametral pitch of 48 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque\u003c\/li\u003e\n \u003cli\u003eMolded polyoxymethylene for quiet operation, low friction and moisture absorption, and high resistance to heat and abrasion combined with the corrosion resistance, ductility at high temperatures, and low magnetic permeability of brass\u003c\/li\u003e\n \u003c\/ul\u003e\n\n","published_at":"2022-03-18T14:49:08+11:00","created_at":"2022-03-18T14:49:08+11:00","vendor":"Boston Gear","type":"Spur Gears","tags":["auspowers_batchone"],"price":10100,"price_min":10100,"price_max":10100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41333559754932,"title":"0.188 Inches \/ 0.125 Inches \/ 0.792 Inches","option1":"0.188 Inches","option2":"0.125 Inches","option3":"0.792 Inches","sku":"B004NYAK4U","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Boston Gear YPB4836 Spur Gear, Molded Delrin with Brass Inserts, Inch, 48 Pitch, 0.188\" Bore, 0.792\" OD, 0.125\" Face Width, 36 Teeth 8 Inches 0.125 Inches 0.792 Inches 0.188 Inches - 0.188 Inches \/ 0.125 Inches \/ 0.792 Inches","public_title":"0.188 Inches \/ 0.125 Inches \/ 0.792 Inches","options":["0.188 Inches","0.125 Inches","0.792 Inches"],"price":10100,"weight":23,"compare_at_price":null,"inventory_management":null,"barcode":"0781711539606","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/auspowers.com\/cdn\/shop\/products\/B004NYAK4U.jpg?v=1648548435","\/\/auspowers.com\/cdn\/shop\/products\/316ExuUJtvL.jpg?v=1647575348","\/\/auspowers.com\/cdn\/shop\/products\/61TYOUu8YML.jpg?v=1647575348"],"featured_image":"\/\/auspowers.com\/cdn\/shop\/products\/B004NYAK4U.jpg?v=1648548435","options":["Bore Diameter String","Face Width","Item Diameter String"],"media":[{"alt":"[Australia - AusPower] - Boston Gear YPB4836 Spur Gear, Molded Delrin with Brass Inserts, Inch, 48 Pitch, 0.188\" Bore, 0.792\" OD, 0.125\" Face Width, 36 Teeth 8 Inches 0.125 Inches 0.792 Inches 0.188 Inches ","id":25344854130868,"position":1,"preview_image":{"aspect_ratio":0.813,"height":1692,"width":1376,"src":"\/\/auspowers.com\/cdn\/shop\/products\/B004NYAK4U.jpg?v=1648548435"},"aspect_ratio":0.813,"height":1692,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/B004NYAK4U.jpg?v=1648548435","width":1376},{"alt":"[Australia - AusPower] - Boston Gear YPB4836 Spur Gear, Molded Delrin with Brass Inserts, Inch, 48 Pitch, 0.188\" Bore, 0.792\" OD, 0.125\" Face Width, 36 Teeth 8 Inches 0.125 Inches 0.792 Inches 0.188 Inches ","id":25198926004404,"position":2,"preview_image":{"aspect_ratio":1.16,"height":431,"width":500,"src":"\/\/auspowers.com\/cdn\/shop\/products\/316ExuUJtvL.jpg?v=1647575348"},"aspect_ratio":1.16,"height":431,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/316ExuUJtvL.jpg?v=1647575348","width":500},{"alt":"[Australia - AusPower] - Boston Gear YPB4836 Spur Gear, Molded Delrin with Brass Inserts, Inch, 48 Pitch, 0.188\" Bore, 0.792\" OD, 0.125\" Face Width, 36 Teeth 8 Inches 0.125 Inches 0.792 Inches 0.188 Inches ","id":25198926037172,"position":3,"preview_image":{"aspect_ratio":0.999,"height":1631,"width":1630,"src":"\/\/auspowers.com\/cdn\/shop\/products\/61TYOUu8YML.jpg?v=1647575348"},"aspect_ratio":0.999,"height":1631,"media_type":"image","src":"\/\/auspowers.com\/cdn\/shop\/products\/61TYOUu8YML.jpg?v=1647575348","width":1630}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eBoston Gear YPB4836 Spur Gear, Molded Delrin with Brass Inserts, Inch, 48 Pitch, 0.188\" Bore, 0.792\" OD, 0.125\" Face Width, 36 Teeth\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eThe Boston Gear molded Delrin (polyoxymethylene) with brass inserts spur gear\nwith 20-degree pressure angle (PA) and a diametral pitch (DP) of 48 transmits\ntorque between parallel shafts to provide rotational power to another part of\na motorized system. It has a 20-degree pressure angle for lower contact ratio\nbetween gears, resulting in higher load capacity than smaller pressure angles,\nand a 48-diametral pitch for applications for applications where controlling\nchanges in speed and direction of rotation with precision is more important\nthan transferring torque. This spur gear, which can mesh only with spur gears\nthat have the same pressure angle and diametral pitch, is made of molded\nDelrin (polyoxymethylene) for quiet operation, low friction and moisture\nabsorption, and high resistance to heat and abrasion combined with the\ncorrosion resistance, ductility at high temperatures, and low magnetic\npermeability of brass. This Boston Gear spur gear is suitable for use in a\nvariety of commercial and industrial applications, such as construction\nequipment, aeronautics, conveyors, and manufacturing equipment, among\nothers.Spur gears, the most common gear type, have a circular or cylindrical\nshape with teeth bordering the outer perimeter and are used for transmitting\nrotational torque and motion between parallel rotating shafts. A spur gear's\npressure angle (PA), diametral pitch (also called DP or pitch), and its\nmaterial are important factors to consider when purchasing. Gears come in\nseveral types for use in different power transmission configurations and for\ndifferent applications, including bevel and miter gears (for rotating shafts\nperpendicular to each other), change gears (to increase or decrease torque and\nspeed), helical gears (for high rates of rotational speed), internal gears\n(where one gear is nested inside the other), rack and pinion gears (for\nturning rotational motion into linear motion), and worm gears (for\nperpendicular shafts in tight spaces and quiet operation). Gears are suitable\nfor use in the agriculture, automotive, construction, mining, and packaging\nindustries, and can be found in a variety of machines, including bicycles,\nautomobiles, and elevators, among others.Boston Gear manufactures a variety of\ngear drives, variable speed drives, clutches, and the components that comprise\nthese systems including sprockets and bearings. Their manufacturing designs,\nproduction, and inspection meet International Organization for Standardization\n(ISO) standards for quality assurance. The company, founded in 1877, is\nheadquartered in Charlotte, NC.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eTransmits torque between parallel shafts to provide rotational power to another part of a motorized system\u003c\/li\u003e\n \u003cli\u003ePressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles\u003c\/li\u003e\n \u003cli\u003eDiametral pitch of 48 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque\u003c\/li\u003e\n \u003cli\u003eMolded polyoxymethylene for quiet operation, low friction and moisture absorption, and high resistance to heat and abrasion combined with the corrosion resistance, ductility at high temperatures, and low magnetic permeability of brass\u003c\/li\u003e\n \u003c\/ul\u003e\n\n"}