Glass Polish 14055 GP-PRO Glass Polishing Compound, Professional Glass Polishing Solution, Glass Polish 8.4oz
Glass Polish 14055 GP-PRO Glass Polishing Compound, Professional Glass Polishing Solution, Glass Polish 8.4oz
Read more Average Particle Size: 2.3 microns Purity: Treo 85% Suitable for any types of glas No sharp edges, Clean cut, Fast stock removal Contains No Zinc No mixing required, Easy and safe to use GP-PRO GLASS POLISHING COMPOUND GP-PRO Glass Polishing Compound Professional Grade used by Glass Polish technicians worldwide. Unique suspended cream formula with a high concentration of rare earth oxides to provide the brightest possible finish in all applications. Improves glass clarity and smoothness and helps to maintain its original look. GP-PRO Glass polishing compound is recommended as the final polishing stage in the multi-stage scratch removal process when abrasive discs have been used. Glass Industry: polishing blemishes, scuffs, superficial scratches, hard water deposits, adhesive residue. Automotive Industry: polishing windscreens, rear and side windows and view mirrors. Chaton Industry: beads and crystal polishing. Optical Industry: Lens polishing. Horological Industry: watch glass polishing. Also suitable for polishing marbles and ceramic surfaces. Read more HOW TO USE No mixing required! Glass polishing compound a combination of mechanical and chemical action. The material must reach and maintain a certain temperature to stimulate the chemical reaction. The mechanical action employs felt pads or felt wheels. For surface restoration, the pre-mixed compound is applied directly to the glass surface. A damp felt pad or wheel is then used to agitate the paste. The friction of the wheel creates the heat needed to activate the polishing process. Too much heat will dry the paste, so care must be taken to keep the paste wet at all times. Clean the glass surface to ensure that all dust and stray particles have been removed. Fit a felt polishing pad on the backing pad and apply half a teaspoon size amount of the glass polishing compound to the middle of the polishing pad and place the face of the pad on the glass. Start the rotary device. Keeping the polishing face flat against the glass, move the device slowly from left to right, up and down. Keep a nice even pressure against the glass as you move the pad over the glass. After a few seconds of polishing, the milky looking slurry will form. Continue polishing until the slurry is dry. Spray a bit of water to the pad or glass and repeat this process as many times as necessary until the glass is visually clear. Tip: When polishing, don’t be afraid to experiment with speed and pressure. Lower down the speed to about 1000-1400 rpm and put the pressure to 5-10 lbs to help the polishing compound brake down more quickly and get better results. Remember that using too much water while polishing will dissolve the compound. Using a mist spray is an ideal solution. TYPES OF APPLICATIONS Use with applicator pad / soft cloth Suitable for use by hand with a hand applicator pad or a soft cloth for general surface clean-up/maintenance. No electric tool required. Use with Electric Drill Subtitle for use with an electric drill at 1000-1500 RPM. GP-PRO Felt polishing pad required. An ideal solution for Do- It-Yourself projects. Removes surface marks, hairline scratches, water damage, stains, tree sap. Use with Rotary Polisher Subtitle for use with rotary polisher at 1000-2200 rpm. GP-PRO Felt polishing pad required. Ideal solution for large areas repair. Removes surface marks, hairline scratches, water damage, stains, tree sap. Used as final polishing step in multi-stage glass scratch repair proces Use with DA Polisher Subtitle for use with DA polisher at 1000-2000 rpm. GP-PRO Felt polishing pad required. Ideal solution for car glass polishing. Removes surface marks, hairline scratches, water damage, stains, tree sap. Read more 1.7 oz High Grade 3.4 oz High Grade 8.4 oz High Grade 16.9 oz High Grade Bottle Size 1.7 oz (50ml) 3.4 oz (100ml) 8.4 oz (250ml) 16.9 oz (500ml) Particle Size 2.3 microns 2.3 microns 2.3 microns 2.3 microns
Product Features
- A combination of a high concentration of rare earth oxides to provide the best possible finish in all polishing applications.
- Removes surface marks, water damage, stain and limescale, hairline scratches, tree sap, haziness.
- Suitable for use with power hand device for surface restoration or with hand pad for general surface clean-up.
- Can be used on any type of glass surface including automotive glass, toughened glass, windows, patio doors, glass tables, kitchen hubs.
- Bottle size 8.4 oz (250 ml) Average particle size 2.3 microns